Flashed LG ok by Octopus box Post ở đây

Bản in

Show 40 post(s) from this thread on one page

07-02-2012, 17:10
bonmobile89

GX500 flash +read code 0k
Welcome to Octopus Box LG Software version 2.0.4
--------------------------------------------------------------------------------
Platform: LG Infineon
Selected port: USB
Selected model: GX500
Disconnect battery and connect USB cable to phone...
Reading info. Please wait...
IMEI A: 359784-03-121947-6
Selecting output file...
Reading EEPROM into file "GX500-359784031219476.EEP"...
Reading EEPROM done!
Reading codes. Please wait...
Backup saved to
"GX500-359784031219476_07-02-2012_17-09-14.eep"
--------------------------------------------------------------------------------
NCK : 1481 0366 3725 4403
NSCK : 6907 9125 4991 4196
SPCK : 0156 3258 0830 0269
CCK : 2638 8122 7774 9134
SIM : 1415 9712 2059 4710
To finish the operation, please perform the following steps:
1. Insert the original SIM card and type 2945#*71001#
2. Go to menu>Settings>Security>SIMLOCK and enter the code.
15-02-2012, 11:21
minhphuc

cf360 unlock ok!
Welcome to Octopus Box LG Software version 2.0.5
--------------------------------------------------------------------------------
Platform: LG SEMC
Selected port: COM1
Selected baudrate: 921600
Selected model: CF360
Use Testpoint/Jumper: No
--------------------------------------------------------------------------------
For correct working the battery must be fully charged!
Please, reconnect battery, press and hold volume-up button and connect
USB cable.
If phone not connected, connect (solder) jumper according to picture
("Show testpoint" button).
Starting...
Phone found!
Chip ID: 0xD9000401FFFFFFFF
Chipset: DB3200
BootROM mode detected
Sending ACC preloader...OK
Sending APP preloader...OK
CID: 54
IMEI: 011631-00-296203-2
Color: Red
Sending ACC production loader...OK
Sending APP production loader...OK
Unlocking...OK
Phone successfully unlocked!
Disconnected.
25-02-2012, 22:02
hientoanit

LG c320 unlock ok

Platform: LG Qualcomm
Selected port: COM88
Selected model: C320
Mode: Normal
Phone model: LGC320
SW Version: LGC320-QSC6270-V10a-SEP-13-2010-XX
IMEI: 354613-04-006971-0
Bluetooth address: 5C:17:D3:51:E5:89
Checking security...OK
Unlocking...
Switching to Download mode...OK
Sending loader...OK
Reading security area...OK
Backup saved to "C320-354613040069710_25-02-2012_21-37-45.sec"
Writing security area...OK
Phone successfully unlocked!
Rebooting phone...
18-03-2012, 11:46
minhphuc

LG cf360 unlock done
Welcome to Octopus Box LG Software version 2.0.8
--------------------------------------------------------------------------------
Platform: LG SEMC
Selected port: COM30
Selected baudrate: 921600
Selected model: CF360
Use Testpoint/Jumper: No
--------------------------------------------------------------------------------
For correct working the battery must be fully charged!
Please, reconnect battery, press and hold volume-up button and connect
USB cable.
If phone not connected, connect (solder) jumper according to picture
("Show testpoint" button).
Starting...Canceled!
Disconnected.
--------------------------------------------------------------------------------
Platform: LG SEMC
Selected port: COM30
Selected baudrate: 921600
Selected model: CF360
Use Testpoint/Jumper: No
--------------------------------------------------------------------------------
For correct working the battery must be fully charged!
Please, reconnect battery, press and hold volume-up button and connect
USB cable.
If phone not connected, connect (solder) jumper according to picture
("Show testpoint" button).
Starting...
Phone found!
Chip ID: 0xD9000401FFFFFFFF
Chipset: DB3200
BootROM mode detected
Sending ACC preloader...OK
Sending APP preloader...OK
CID: 54
IMEI: 011631-00-956511-9
Color: Red
Sending ACC production loader...OK
Sending APP production loader...OK
Unlocking...OK
Phone successfully unlocked!
Disconnected.
--------------------------------------------------------------------------------
Platform: LG SEMC
Selected port: COM30
Selected baudrate: 921600
Selected model: CF360
Use Testpoint/Jumper: No
--------------------------------------------------------------------------------
For correct working the battery must be fully charged!
Please, reconnect battery, press and hold volume-up button and connect
USB cable.
If phone not connected, connect (solder) jumper according to picture
("Show testpoint" button).
Starting...
Phone found!
Chip ID: 0xD9000401FFFFFFFF
Chipset: DB3200
BootROM mode detected
Sending ACC preloader...OK
Sending APP preloader...OK
CID: 54
IMEI: 011631-00-898430-3
Color: Red
Sending ACC production loader...OK
Sending APP production loader...OK
Unlocking...OK
Phone successfully unlocked!
Disconnected.
04-04-2012, 18:37
Tempb

kh5200 unlock done

HTML Code:

Platform: LG Qualcomm Selected port: COM130 Selected model: KH5200 Mode: Normal Phone model: KH5200 SW Version: KH5200-M76xx-V10u-JUL-12-2010-XX IMEI: 351752-04-311564-2 Bluetooth address: 20:21:A5:B0:31:B6 Checking security...OK Unlocking... Switching to Download mode...OK Sending loader...OK Reading security area...OK Backup saved to "KH5200-351752043115642_04-04-2012_17-55-01.sec" Writing security area...OK Phone successfully unlocked! Rebooting phone...
05-04-2012, 12:08
GIALAI_GSM

Tiếng Việt C310 OK

http://nk2.upanh.com/b6.s13.d5/ca713...0405113604.png

Trích:

Welcome to Octopus Box LG Software version 2.0.1
--------------------------------------------------------------------------------
Platform: LG Infineon
Selected port: USB
Selected model: C310
Disconnect battery and connect USB cable to phone...
Phone found.
Sending preloader...OK
Sending loader...OK
Initializing flash...OK
Flash ID: 89B1
Flash type: Intel
Reading info. Please wait...
IMEI A: 354035-xXXXXXXXXX
IMEI B: 354035XXXXXXXXXX
Opening "LGC310AT-00-V10c-ESA-XXX-NOV-30-2010+0.oct"...OK
Erasing...Please wait...OK
Writing Firmware...OK
Writing Firmware done!
Disconnected.
22-05-2012, 13:32
TuệNguyễn

SH460 unlock ok
Welcome to Octopus Box LG Software version 2.0.3
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM10
Selected model: SH460
Mode: Normal
Phone model: SW460804
SW Version: M6281A-KLVZ-4.0.9530T
IMEI: 357451-02-010950-4
Bluetooth address: 00:21:FB:DF:45:1A
Checking security...OK
Unlocking...
Phone successfully unlocked!
22-05-2012, 16:57
TuệNguyễn

KU370 unlock ok
Welcome to Octopus Box LG Software version 2.0.3
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM14
Selected model: KU3700
Mode: Normal
Phone model: KU370006
SW Version: KU370006
IMEI: 355073-04-050163-5
Bluetooth address: 5C:17:D3:0A:E7:4C
Checking security...OK
Unlocking...
Phone successfully unlocked!
09-06-2012, 10:42
toilatoi142001

Welcome to Octopus Box LG Software version 2.1.2
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM16
Selected model: CU920
Mode: Normal
Phone model: CU920
SW Version: CU920-MSM4090201D-V10s-DEC-12-2008-ATT-US
IMEI: 011333-00-945626-2
Bluetooth address: 00:22:A9:20:88:62
Firmware compiled date: Nov 10 2008
Firmware compiled time: 23:00:00
Firmware released date: Dec 12 2008
Firmware released time: 14:36:03
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM16
Selected model: CU920
Mode: Normal
Phone model: CU920
SW Version: CU920-MSM4090201D-V10s-DEC-12-2008-ATT-US
IMEI: 011333-00-945626-2
Bluetooth address: 00:22:A9:20:88:62
Checking security...OK
Unlocking...
Prepairing loader...OK
Sending loader...OK
Reading security area...
Backup saved to "CU920-011333009456262_09-06-2012_08-41-25.sec"
Erasing security area...OK
Writing security area...OK
Phone successfully unlocked!
Rebooting phone...
11-06-2012, 16:03
toilatoi142001

Platform: LG Infineon
Selected port: USB
Selected model: KM900
Disconnect battery and connect USB cable to phone...
Reading info. Please wait...
IMEI: 352154-03-364443-5
Opening "KM900AT-01-V10t-214-03-APR-29-2009+1.oct"...OK
Will be written 11 zone(s)
Writing Firmware...
Sending certificate...OK
Writing "psi_large_block_16_bit_paging.flb"...OK
Sending certificate...OK
Writing "slb_large_block_16_bit_paging.flb"...OK
Sending certificate...OK
Writing "MPEH_OPERA_SPAIN_ORANGE.fls"...OK
Writing "MPEH_OPERA_SPAIN_ORANGE.fls"...OK
Sending certificate...OK
Writing "MPEH_OPERA_SPAIN_ORANGE.eep"...OK
Sending certificate...OK
Writing "MPEH_OPERA_SPAIN_ORANGE.dsp"...OK
Sending certificate...OK
Writing "ua_large_block_16_bit_paging.flb"...OK
Sending certificate...OK
Writing "OPERA_SPAIN_ORANGE-ROOT.dfat"...OK
Sending certificate...OK
Writing "OPERA_SPAIN_ORANGE-CUST.dfat"...OK
Sending certificate...OK
Writing "OPERA_SPAIN_ORANGE-USER.dfat"...OK
Sending certificate...OK
Writing "a250_single_image.fls"...OK
Writing Firmware done!

Show 40 post(s) from this thread on one page