e1050 cần unlock

em dùng hwk bấm vào unlock E2P nhưng chỉ ra được thế này;
UFxBoot V2.2 (c) SarasSoft 2003., Id: 62 CF 1 10
UFS_USB V2.8 (c) SarasSoft 2007., S/n: 48895
HID: 4058DDEA02270073
HWK: A1.04-PRO1
Licence: True
LogFile: .\_!_LOG\48895_12720125_2102_LOG.txt
Loaded Settings from: Sams.ini

Connect Cable to Switched Off Mobile (with battery)
Preloader Ok 7A, 460800 Baud
Flashloader Ok
FLASH Id: SEC, K5N6433ATM [NOR 64Mb]
MCU Read Done, 524288 byte(s), Time: 00:11, 0
E2P Info:
REG.FIRMWARE: E1050DXKH1
If not See Keys, use *2767*3855# and try Again
E2P Saved as C:\Program Files\SarasSoft\UFS\UFS_SAMs\Read\E1050__E2P.bin

nó không thể lên được code master để nhập vào máy.
ae ai biết qua chỉ giúp
thanks all

Trích:

---

If not See Keys, use *2767*3855# and try Again

---

Bấm mã reset theo hướng dẫn xem!

Trích:

---

Được post bởi VanTuan-ST

Bấm mã reset theo hướng dẫn xem!

---

cám ơn anh .
đã ok
UFxBoot V2.2 (c) SarasSoft 2003., Id: 62 CF 1 10
UFS_USB V2.8 (c) SarasSoft 2007., S/n: 48895
HID: 4058DDEA02270073
HWK: A1.04-PRO1
Licence: True
LogFile: .\_!_LOG\48895_12720125_3617_LOG.txt
Loaded Settings from: Sams.ini

Connect Cable to Switched Off Mobile (with battery)
Preloader Ok 7A, 460800 Baud
Flashloader Ok
FLASH Id: SEC, K5N6433ATM [NOR 64Mb]
MCU Read Done, 524288 byte(s), Time: 00:12, 0
E2P Info:
REG.FIRMWARE: E1050DXKH1
If not See Keys, use *2767*3855# and try Again
E2P Saved as C:\Program Files\SarasSoft\UFS\UFS_SAMs\Read\E1050__E2P.bin

Connect Cable to Switched Off Mobile (with battery)
Preloader Ok 7A, 460800 Baud
Flashloader Ok
FLASH Id: SEC, K5N6433ATM [NOR 64Mb]
MCU Read Done, 524288 byte(s), Time: 00:12, 0
E2P Info:
REG.FIRMWARE: E1050DXKH1
MASTER: 94418370
SIMLOCK STATUS: 0020
#SIMLOCK*SIM*4184867195#
If not See Keys, use *2767*3855# and try Again
E2P Saved as C:\Program Files\SarasSoft\UFS\UFS_SAMs\Read\E1050__E2P.bin
File CRC: 0x5EA352B5
MCU Write Done, 262144 byte(s), Time: 00:12