2700 flash bằng phonix ở chế độ dead phone xin giúp

2700 máy đang sử dụng mất nguồn, bâm nguồn kim dòng treo o,1a. em check không ra hết nên ko backup được, chạy bằng phonix thì báo lổi thế này , xin ae giup



Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
1. Make sure USB cable, Battery and charger are removed from device.
2. Insert USB cable to device
3. Insert Battery to device
4. Insert Charger to device
--- Press phone's power button! ---
Loading secondary boot code: 14592 bytes
Secondary boot loaded
Loading update server code: 308032 bytes
Update server loaded
Starting to recover the phone
Recoverying phone
Initializing
Error initializing Algorithm. 0x84009427
ERROR: Failed to set phone to flashmode
Scanning image files...
Unable to set the phone to flash mode. Unable to flash.
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
1. Make sure USB cable, Battery and charger are removed from device.
2. Insert USB cable to device
3. Insert Battery to device
4. Insert Charger to device
--- Press phone's power button! ---
Loading secondary boot code: 14592 bytes
Secondary boot loaded
Loading update server code: 308032 bytes
Update server loaded
Starting to recover the phone
Recoverying phone
Initializing
ERROR: Unable to detect device 0x8401F145. Check USB connection!
ERROR: Failed to set phone to flashmode
Scanning image files...
Unable to set the phone to flash mode. Unable to flash.
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
1. Make sure USB cable, Battery and charger are removed from device.
2. Insert USB cable to device
3. Insert Battery to device
4. Insert Charger to device
--- Press phone's power button! ---
Loading secondary boot code: 14592 bytes
Secondary boot loaded
Loading update server code: 308032 bytes
Update server loaded
Starting to recover the phone
Recoverying phone
Initializing
ERROR: Unable to detect device 0x8401F145. Check USB connection!
ERROR: Failed to set phone to flashmode
Scanning image files...
Unable to set the phone to flash mode. Unable to flash.
All operations completed
Product flashing aborted

còn đây là log check bằng mxbox

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 4], SN: C0855D93
Using device: HTI, FW ver: 00.50, SN: 0000B3E9
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.19798(05-01-2012), Library ver: 1.0.0.13703(05-01-2012)
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006030C192101033000 [RAP3G ver: PA 3.x]
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 0F700102F1F101560F979191BB4BC8F96E4FF761
ASIC MODE ID: 00
ROOT KEY HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
ROM ID: 273F6D55DFAAF68F
SecondaryBoot: RAP3Gv3_2nd.fg [BB5] version: 9.11.1 revision: 0.0 size: 0x3C00
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
eBB5ProtocolType: OLD
Storage0: 00EC 2400 - 0000 8A31 [Samsung ] type: FLASH,NOR, asic:CMT
Storage content: 0000 0000 0000 0000 0000 0000 0000 0000
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
TransmissionMode: 16Bit
Algorithm: RAP3Gv3_algo.fg [BB5 ALGORITHM] version: 9.50.0 revision: 0.0 size: 0x23010
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
CMT PAPUBKEYS HASH: 3EA22A1DDA660002E56108DB5072A10F8709443F
TransmissionMode: DDR&TX2
Original Imei: 35431304117493
Original Product code: 0579808
Bluetooth ID: 303855260800

làm phần cứng đi bạn ơi
máy chưa có buscheck được mà

chạy bằng box đi nhé

em đã flash 3 lần cùng 1 kết quả như thế này
xin ae chi giáo.
thanks ae

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 4], SN: C0855D93
Using device: HTI, FW ver: 00.50, SN: 0000B3E9
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.19798(05-01-2012), Library ver: 1.0.0.13703(05-01-2012)
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006030C192101033000 [RAP3G ver: PA 3.x]
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 0F700102F1F101560F979191BB4BC8F96E4FF761
ASIC MODE ID: 00
ROOT KEY HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
ROM ID: 273F6D55DFAAF68F
SecondaryBoot: RAP3Gv3_2nd.fg [BB5] version: 9.11.1 revision: 0.0 size: 0x3C00
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
eBB5ProtocolType: OLD
Storage0: 00EC 2400 - 0000 8A31 [Samsung ] type: FLASH,NOR, asic:CMT
Storage content: 0000 0000 0000 0000 0000 0000 0000 0000
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
TransmissionMode: 16Bit
Algorithm: RAP3Gv3_algo.fg [BB5 ALGORITHM] version: 9.50.0 revision: 0.0 size: 0x23010
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
CMT PAPUBKEYS HASH: 3EA22A1DDA660002E56108DB5072A10F8709443F
TransmissionMode: DDR&TX2
Processing MCU file: rm561__09.98.mcusw
[BB5,BB5 ALGORITHM] size: 19.41 MB
Supported Ids: 010C192101013000, 0103192101003000, 030C192101033000
Storing certificate [NPC, VARIANT, R&D, CCC, HWC] ...OK
Erase size: 21 MB
CMT FLASH,NOR area [00000000-000006BF]
CMT FLASH,NOR area [000006C0-0001FFFF]
CMT FLASH,NOR area [00040000-000BFFFF]
CMT FLASH,NOR area [000C0000-0013FFFF]
CMT FLASH,NOR area [00140000-0137FFFF]
CMT FLASH,NOR area [01380000-0151FFFF]
erased in 1 min 19.937 s
Prog.status for Asic CMT ...
NOR: OK
Flash programming ...
CMT NOLO block sent
CMT KEYS block sent
CMT PRIMAPP block sent
CMT PASUBTOC block sent
CMT PAPUBKEYS: 3EA22A1D [RAP Certificate 202 v.1] sent
CMT UPDAPP block sent
CMT DSP0 block sent
CMT MCUSW block sent
Prog.status for Asic CMT ...
NOR: OK
Programming completed in 1 min 12.046 s
Processing PPM file: rm561__09.98.ppm_t
[BB5,BB5 ALGORITHM] size: 6.62 MB
Supported Ids: 010C192101013000, 0103192101003000, 030C192101033000
Erase size: 8.62 MB
CMT FLASH,NOR area [01520000-01DBFFFF]
erased in 28.547 s
Prog.status for Asic CMT ...
NOR: OK
Flash programming ...
Prog.status for Asic CMT ...
NOR: OK
Programming completed in 24.954 s
Processing CNT file: rm561__09.98.image_ctv_au_black
[BB5,BB5 ALGORITHM] page size: 128 K size: 10.89 MB
Supported Ids: 010C192101013000, 0103192101003000, 030C192101033000
Erase size: 34 MB
CMT FLASH,NOR area [01DC0000-0215FFFF]
CMT FLASH,NOR area [02160000-03FBFFFF]
erased in 1 min 5.734 s
Prog.status for Asic CMT ...
NOR: OK
Flash programming ...
Prog.status for Asic CMT ...
NOR: OK
Programming completed in 41.282 s
Total time for flashing process(boot+erase+write) was 5 min 19.718 s

còn đây là log flash bằng usb, xin ae chỉ giáo giúp



MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 4], SN: C0855D93
Using device: USB ROM and HTI, FW ver: 00.50, SN: 0000B3E9
Connection status: UHCI:HUB::USB 2.00 (Full-speed)
Driver: NMWCD, ver: 7.1.32.73
Module ver: 1.0.0.19798(05-01-2012), Library ver: 1.0.0.13703(05-01-2012)
Processing MCU file: rm561__09.98.mcusw
[BB5,BB5 ALGORITHM] size: 19.41 MB
Supported Ids: 010C192101013000, 0103192101003000, 030C192101033000
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Waiting for USB ROM device ...
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Waiting for USB ROM device ...
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Waiting for USB ROM device ...
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 3AE7296B
CMT SYSTEM ASIC ID: 000000010000022600010006030C192101033000 [RAP3G ver: PA 3.x]
CMT EM0 ID: 00000296
CMT EM1 ID: 00000B22
CMT PUBLIC ID: 0F700102F1F101560F979191BB4BC8F96E4FF761
CMT ASIC MODE ID: 00
CMT ROOT KEY HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROM ID: 273F6D55DFAAF68F
Flashing CMT Update Server Data, ULO: 0x3900 bytes
Update Server code succesfully sent to phone.
Flashing CMT Update Server Data, UPDAPP: 0x4B340 bytes
Update Server code succesfully sent to phone.
Flashing CMT Update Server Data, PASUBTOC: 0x59980 bytes
Update Server code succesfully sent to phone.
Waiting for USB device removal ...OK
Waiting for USB device arrival ...
Failed to set phone to flashmode, possible reason: Update Agent not running or PASUBTOC corrupted !
Please recover phone using FBUS.

up lên cho ea giúp

Trước tiên bạn backup RPL lại.(Nếu backup = MX thì chọn APE vì máy đang dead,hoặc dùng hộp JAF...)
Sau đó lấy Ver cao nhất của 5130 flash cho nó xem có tỉnh ko?(Mục đích là để backup đc PM full )

Tình trạng máy lúc đầu thế nào bạn?
khả năng lớn là lỗi cặp rùi

dòng này lôic cặp rất nhiều

cái này lỗi phần cứng rồi anh ,múc 2 con nguồn nhỏ trước rùi tính tiếp

múc con nguồn k hết thay căp nha ban dòng này hay bi lổi căp

đóng hoặc thay con nguồn lớn đi bạn ! không check được thì mới đụng nhà lầu !

đã thay thay nguồn lớn nhưng not ok, xin ae chỉ giáo thêm

bạn add nick yahoo mình đi nha ! send cho bạn mấy hình ảnh sửa chữa pan này !? upp lên diển đàn không được ! phamdienmobile@yahoo.com

tình trạng này khả năng lổi cặp là rất cao