Flash phiên bản mới nhất. Không nhất thiết chọn ngôn ngữ nhé bạn. Box ATF là tốt nhất
Yêu cầu ACE chạy đúng file . Và lưu ý mở file ẩn máy tính lên mới chạy được nhé.
card found: A1B5CCE8
registered to: CycloneBox
Connect phone on selected interface...
Check : Processing RX-51_2009SE_21.2011.38-1_PR_COMBINED_MR0_ARM.bin
==========
FW APE version : 21.2011.38-1
FW CMT version : rx51_ICPR82_10w08
FW PRx release : PR_1.4
FW Region info : GLOBAL
FW Region ver : MR0
KERNEL version : 2.6.28-20103103+0m5
==========
Check : File Is Ok !
Core : v1.51 , FlashEngine : v2.01
Press and hold "U" button and insert cable! (Ignore if phone Connected)
Waiting for NOLO...
Connect in NOLO mode Ok!
Phone Info :
Type : RX-51 , HWRev : 2101
NOLO : 01/0E/14
SWVer: RX-51_2009SE_20.2010.36-2_PR_MR0
Device mode : Production mode
Read info Ok
---Processing MCU image---
Processing NOL part
File : RX-51_2009SE_21.2011.38-1_PR_COMBINED_MR0_ARM.bin
Processing : xloader , 1.4.14.9+0m5
Processing : secondary , 1.4.14.9+0m5
NOL part Ok, boot flash done
Processing APE part
File : RX-51_2009SE_21.2011.38-1_PR_COMBINED_MR0_ARM.bin
Processing : kernel , 2.6.28-20103103+0m5
Kernel flash Ok
Processing APE part
File : RX-51_2009SE_21.2011.38-1_PR_COMBINED_MR0_ARM.bin
Processing : rootfs , RX-51_2009SE_21.2011.38-1_PR_MR0
RootFs flash Ok
Processing CMT part
File : RX-51_2009SE_21.2011.38-1_PR_COMBINED_MR0_ARM.bin
Processing : cmt-2nd , BB5_09.36
Processing : cmt-algo , BB5_09.36
Processing : cmt-mcusw , rx51_ICPR82_10w08
CMT part prepare Ok, files are sent
Program CMT request Ok
Switch : OSSO UART+USB
Version : RX-51_2009SE_21.2011.38-1_PR_MR0
Switch CMT request Ok
CMT : Erasing...
CMT : PROG_ERROR , Last data : error
CMT : Write not done!
CMT Part program error!
minh k hiểu lăm file ẩn là ntn hả nam ôi ! minh chạy bằng bestoll cũng k đc luôn
AE cho hỏi phím U là chỉ phím j thế , phím U trên máy tính à
anh em chú ý thời gian bài viết nhé '' 22-01-2013 10:52''
p/s: Đọc thì all đều như nhau ,chưa thấy ai test ok.call hỏi thì một số anh em nói sưu tầm.Anh em nào dám khảng định ok 100% thì liên hệ mình nhé
cần bán xác n900 ai mua ko nào?????????/??/
NhạtNam ơi mình củng có 1 con N900 bi. y chang như topic của bạn,bạn có thể cho minh xin 2 file emmc và fimware trên được không,nếu có thể bạn up lên mediafire thì càng tốt.Mình xin cảm ơn bạn rất nhiều,rất mong nhận được tin sớm của bạn.