e có com e6-00 bi mã bảo vệ . bác nào làm rồi giúp em với . e chỉ có mxbox thôi
Bản in
e có com e6-00 bi mã bảo vệ . bác nào làm rồi giúp em với . e chỉ có mxbox thôi
flash thui
hwk chiến hoặc BEST TOOL
lôi best tool ra múc cho nhanh
e flsh bằng best tool nó báo thế này
card found: A1B5CCE8
registered to: CycloneBox
Connect phone on selected interface...
Connect phone on selected interface...
Core : v1.51 , FlashEngine : v1.8
Selected FlashSettings : Manual
-> File : RM-609_022.014_U03.01_79.92.uda.fpsx not found! Check it!
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : RM-609_022.014_79.92_prd.core.fpsx
PPM : RM-609_022.014_37.01_Vietnam_QW_79.92_prd.rofs2.fpsx
PPM2 : RM-609_022.014_C02.01_SEAP_79.92_prd.rofs3.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 1E80020940DA0344A8B59E725B386CCCE80DFE3D
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00680020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:03
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : blank (Erased or HW failure)
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
- > No any CRT data (MCU damaged/CERT erased), skip saving
===Flashing [MCU]===
Erase : Processing RM-609_022.014_79.92_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:04
Write : Processing RM-609_022.014_79.92_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 509 blocks
TIME : Write time : 00:00:18
MCU Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000
===Flashing [PPM]===
Erase : Processing RM-609_022.014_37.01_Vietnam_QW_79.92_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-609_022.014_37.01_Vietnam_QW_79.92_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 128 blocks
TIME : Write time : 00:00:05
PPM Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000
===Flashing [PPM2]===
Erase : Processing RM-609_022.014_C02.01_SEAP_79.92_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-609_022.014_C02.01_SEAP_79.92_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 2 blocks
TIME : Write time : 00:00:00
PPM Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000
ADL: Close_Session
Content: 000300000000040000000400000000
ADL: Reboot
Flashing done!
Total flash time : 00:00:30
Reboot phone now...
- > AfterFlash Failed! :( Reason : Downgrade try or HW Error
Anyway - try reinsert battery and PowerUp phone manualy
Connect phone on selected interface...
Done!
Elapsed: 00:03:16
Connect phone on selected interface...
giờ bật nguồn nó chí rung thôi . các bác gúp e với
ok rồi thank các bac nha