-
upp dễ củ chúi lắm anh khò mặt dưới lấy ra đõ chân đống lại ,không đc thay luôn nhưng hơi khó kiếm để thay.chúc anh thành công
-
THAY cpu rối , thay flash luôn nhưng check dược nhưng flash máy báo lổi
MCU ID: 0x2292
FLASH ID0: 00000000 <=> Flash -> not detected Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 0
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: 00 12 00 12 00 12 00 12 00 12 00 12 00 12 00 12
Checking RAM for ALGO...
Algo is ready...
Checking FAID calculation...
P-key nokia module version 01.02
Done!
Phone Restarted...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Failed! Aborting!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: E:\Program Files\Nokia\Phoenix\Products\1200 RH-99_5.23\rh99_05.230
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: E:\Program Files\Nokia\Phoenix\Products\1200 RH-99_5.23\rh99_05.230
PPM Flash file: E:\Program Files\Nokia\Phoenix\Products\1200 RH-99_5.23\rh99_05.23mr
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: E:\Program Files\Nokia\Phoenix\Products\1200 RH-99_5.23\rh99_05.230
PPM Flash file: E:\Program Files\Nokia\Phoenix\Products\1200 RH-99_5.23\rh99_05.23mr
CNT Flash file: E:\Program Files\Nokia\Phoenix\Products\1200 RH-99_5.23\rh990_nai5.23mr
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Backing up PM Field 208 as RPL...
Setting local mode...
Failed! Aborting!
Failed to backup imei...
MCU: E:\Program Files\Nokia\Phoenix\Products\1200 RH-99_5.23\rh99_05.230
Booting phone...
MCU ID: 0x2292
BOOT file: E:\Program Files\ODEON\JAF\Flash\u3_2nd.fia
Loader version: 04.46.01 -> Revision: 0007
Boot size is 0x09A8
Boot is ready...
FLASH ID0: 00000000 <=> Flash -> not detected Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 0
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: 00 12 00 12 00 12 00 12 00 12 00 12 00 12 00 12
Flash ID is 0x00000000
Flash loader is E:\Program Files\ODEON\JAF\Flash\u3_amd.fia
Loader version: 04.46.01 -> Revision: 0007
Loader size is 0x7528; Loader chk: d6
Loader is ready...
P-key nokia module version 01.02
MSID: 8472B38E10F26567F9BA74029B
MSID decoded: 3E4EBAE900549B37A8000000
FAID: 288E6043F920F09B5003BA97
Operation took 0 minutes 6 seconds...
Erasing...
Found 5 interval(s) to erase
Erasing area: 01000000 - 0100FFFF...
Erasing area: 01010000 - 013AFFFF...
Erasing area: 013B0000 - 013EFFFF...
Erasing area: 017C0000 - 017EFFFF...
Erasing area: 01FC0000 - 01FEFFFF...
Operation took 0 minutes 1 seconds...
Writing...
Error cmd: 14!
Addr: 01000000
-
con đây là cái log bus check bằng mx key mong anh em xem giùm mình vơi
-
sorry vi ấn nhấm nút
Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.11985, Date: 03-02-2010
ASIC ID: 0x2292 [UPPCosto ver: 1.3]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
BootLoader not responding, mostly RAM problem !
-
anh đống lại flash củ rồi chạy lại xem sao anh ạ chúc anh thành công
-
Writing...
Error cmd: 14!
Addr: 01000000
đóng lại lash củ tháo u ra thay con khác con upp này phù nhỏ chút bên góc khỏi phải tốn logger con này mà chạy dc thì máy cũng mất sóng thôi
