New flashtool released!!!

FlashTool v2.9.1001


Bug fixes:
1. [DA] Fix a bug for wrong information about S71PL129N in Flash Device Table.
2. [DA] Fix a bug for Software Unlock Command Sequence wrong block address in Renesas driver. Within 64Mb, DQ7 in block address is fixed 0.
3. [FlashTool] Fix a bug to prevent Scroll back to Page1 when redrawing Test DA message.
4. [DA/BROM_DLL] Fix a bug for manually format failure on MT6228 NFB EVB.

New features:
1. -[FlashTool/BROM_DLL] Support Multi-Load Autodetection Download.
-[FlashTool/BROM_DLL/DA] Support 6229 Download, add m_emi_gen_c in DRAM setting
2. [DA] Support High-Address-Bus pins test for NOR Flash.
3. [DA] Supports new NOR flash device.
[SHARP] LRS18BK
[INTEL] 28F3204C3TD70, [MemoCom] KS03204
4. [DA] Supports new NAND flash device.
[TOSHIBA] TC58NWM9S3B

Download HERE

Thanks @Hoang for info and download!!

B.R.

chà chà cảm ơn bác tài nhiều chắc thằng Trung quốc Sắp ra con CPU MTK ver 2.5 quá chạy chết máy cứu kg đươc đền mệt luôn

================== FlashTool v3.1.02 (2006/11/01) ==================
Bug fixes:
1. [DA] Fix DetectExtDRAM() detection fail when NOR_FLASH_NO_FOUND
2. [DA] Fix POST_PROCESS_FAIL when MAC on Boundary occured at WriteSectors/ReadSectors/EraseSectors
3. [BROM_DLL] Fix Access Violation when BL_HANDLE AutoLoad at ExtractBaseDir()

New features:
1. [BROM_DLL/DA] E-NFB (Enhanced NFB) Download.
2. [DA] MT6225 NOR Flash Booting, can change baud rate up to 921600
3. [DA] MT6225 NFB, modify PLL setting flow
4. [DA] Supports new NOR Flash device (AD-Mux)
[SPANSION] S29NS064N
[SPANSION] S29NS128N
[SPANSION] S29NS256N

5. [DA] Supports new NOR flash device.
[ST] M58PPR256J
[ST] M58PPR512J
[SST] SST32HF3241C
[SPANSION] S71WS128NB0BFWAN3
[SPANSION] S71WS256N
[SPANSION] S71WS512PD0HF3HR

Enhancements:
1. [BROM_DLL] Incress 1st download Pre-process timeout period.
2. [FlashTool] Check SEC_RO/Security Setting/OTP checked-box and filename.
3. [Security] Authentication File for 6225/6226C/6229E4
TEST_AUTH_MTK_6225.auth
TEST_AUTH_MTK_6226C.auth
TEST_AUTH_MTK_6229E4.auth


================== FlashTool v3.1.01 (2006/09/27) ==================
Bug fixes:
1. [BROM_DLL] Fix DL_LoadScatter remote load file callback failed.
2. [DA] Fix INT_SYSRAM detection failure in MT6226, MT6227, MT6226M and MT6225. Using fixed pre-defined size table instead.
3. [DA] Fix TEST_Write() failure at Flash high-address-bus test, the ret data type should be STATUS_E.

New features:
1. [BROM_DLL/FlashTool] Add DA_SetDefaultStartAddr to assign non-standard DA's start address.
2. [BROM_DLL/DA] New MultipleDA mechanism to auto-download corresponding DA according to baseband chip type.
3. [BROM_DLL/DA] Support MT6225, MT6230 baseband chip.
4. [BROM_DLL] New DLL versioning mechanism.
5. [BROM_DLL] Modify Brom_DownloadData to allow multiple blocks download.

Enhancements:
1. [BROM_DLL] DL_AutoLoadByScatRegionName auto-load *.bin file into ROM entry only when scatter file has single load region.
2. [BROM_DLL] Add const qualifier in CALLBACK_REMOTE_GET_FILE_LEN, CALLBACK_REMOTE_READ_FILE and CALLBACK_FILE_INTEGRITY_CHECK.
3. [BROM_DLL] Change BRom_WriteBuf packet length to 1024 bytes.


================== FlashTool v3.1.00 (2006/08/17) ==================
Bug fixes:
1. [DA] Allow multi-bin download for 512KB external ram MCP.

New features:
1. [FlashTool/BROM_DLL/DA] MTK Security Platform support.
2. [FlashTool/BROM_DLL/DA] Provide OTP Read/Write/Lock Operations.
3. [FlashTool/BROM_DLL/DA] Provide a method to retrieve Exception Log.
4. [BROM_DLL/DA] Compare project id between main code and jump table.
5. [BROM_DLL/DA] Detect NOR and NAND flash at the same time.
6. [BROM_DLL] Add AUTO_DETECT_BBCHIP and AUTO_DETECT_EXT_CLOCK option to separate BBCHIP and EXT_CLOCK auto-detection.
7. [BROM_DLL] Export FlashTool APIs.
8. [BROM_DLL] Load brom.ini from brom.dll loading path, not application loading path.
9. [BROM_DLL] Add new function GetBromDLLInfo().

Enhancements:
1. [BROM_DLL/DA] Integrate BROM_DLL and DA's error code into mtk_status.h.
2. [BROM_DLL/DA] Detect DRAM after DA is connnected.
THẬT ẤN TƯƠNG-CHƯA CÓ BẢN ENG

Trích:

---

Được post bởi DAVIS

================== FlashTool v3.1.02 (2006/11/01) ==================
Bug fixes:
1. [DA] Fix DetectExtDRAM() detection fail when NOR_FLASH_NO_FOUND
2. [DA] Fix POST_PROCESS_FAIL when MAC on Boundary occured at WriteSectors/ReadSectors/EraseSectors
3. [BROM_DLL] Fix Access Violation when BL_HANDLE AutoLoad at ExtractBaseDir()

New features:
1. [BROM_DLL/DA] E-NFB (Enhanced NFB) Download.
2. [DA] MT6225 NOR Flash Booting, can change baud rate up to 921600
3. [DA] MT6225 NFB, modify PLL setting flow
4. [DA] Supports new NOR Flash device (AD-Mux)
[SPANSION] S29NS064N
[SPANSION] S29NS128N
[SPANSION] S29NS256N

5. [DA] Supports new NOR flash device.
[ST] M58PPR256J
[ST] M58PPR512J
[SST] SST32HF3241C
[SPANSION] S71WS128NB0BFWAN3
[SPANSION] S71WS256N
[SPANSION] S71WS512PD0HF3HR

Enhancements:
1. [BROM_DLL] Incress 1st download Pre-process timeout period.
2. [FlashTool] Check SEC_RO/Security Setting/OTP checked-box and filename.
3. [Security] Authentication File for 6225/6226C/6229E4
TEST_AUTH_MTK_6225.auth
TEST_AUTH_MTK_6226C.auth
TEST_AUTH_MTK_6229E4.auth


================== FlashTool v3.1.01 (2006/09/27) ==================
Bug fixes:
1. [BROM_DLL] Fix DL_LoadScatter remote load file callback failed.
2. [DA] Fix INT_SYSRAM detection failure in MT6226, MT6227, MT6226M and MT6225. Using fixed pre-defined size table instead.
3. [DA] Fix TEST_Write() failure at Flash high-address-bus test, the ret data type should be STATUS_E.

New features:
1. [BROM_DLL/FlashTool] Add DA_SetDefaultStartAddr to assign non-standard DA's start address.
2. [BROM_DLL/DA] New MultipleDA mechanism to auto-download corresponding DA according to baseband chip type.
3. [BROM_DLL/DA] Support MT6225, MT6230 baseband chip.
4. [BROM_DLL] New DLL versioning mechanism.
5. [BROM_DLL] Modify Brom_DownloadData to allow multiple blocks download.

Enhancements:
1. [BROM_DLL] DL_AutoLoadByScatRegionName auto-load *.bin file into ROM entry only when scatter file has single load region.
2. [BROM_DLL] Add const qualifier in CALLBACK_REMOTE_GET_FILE_LEN, CALLBACK_REMOTE_READ_FILE and CALLBACK_FILE_INTEGRITY_CHECK.
3. [BROM_DLL] Change BRom_WriteBuf packet length to 1024 bytes.


================== FlashTool v3.1.00 (2006/08/17) ==================
Bug fixes:
1. [DA] Allow multi-bin download for 512KB external ram MCP.

New features:
1. [FlashTool/BROM_DLL/DA] MTK Security Platform support.
2. [FlashTool/BROM_DLL/DA] Provide OTP Read/Write/Lock Operations.
3. [FlashTool/BROM_DLL/DA] Provide a method to retrieve Exception Log.
4. [BROM_DLL/DA] Compare project id between main code and jump table.
5. [BROM_DLL/DA] Detect NOR and NAND flash at the same time.
6. [BROM_DLL] Add AUTO_DETECT_BBCHIP and AUTO_DETECT_EXT_CLOCK option to separate BBCHIP and EXT_CLOCK auto-detection.
7. [BROM_DLL] Export FlashTool APIs.
8. [BROM_DLL] Load brom.ini from brom.dll loading path, not application loading path.
9. [BROM_DLL] Add new function GetBromDLLInfo().

Enhancements:
1. [BROM_DLL/DA] Integrate BROM_DLL and DA's error code into mtk_status.h.
2. [BROM_DLL/DA] Detect DRAM after DA is connnected.
THẬT ẤN TƯƠNG-CHƯA CÓ BẢN ENG

---

Có rồi chú Bảo Anh ơi, nhưng nó chuối lắm! Chạy MT6226, 6225, 6227E4 OK, nhưng MT6219 nó toàn lỗi thôi. Chú muốn test, lấy chỗ chú Lâm HD ấy!
Thân!

MT6219 OK mà bác Trung

Trích:

---

Được post bởi taihv

FlashTool v2.9.1001


Bug fixes:
1. [DA] Fix a bug for wrong information about S71PL129N in Flash Device Table.
2. [DA] Fix a bug for Software Unlock Command Sequence wrong block address in Renesas driver. Within 64Mb, DQ7 in block address is fixed 0.
3. [FlashTool] Fix a bug to prevent Scroll back to Page1 when redrawing Test DA message.
4. [DA/BROM_DLL] Fix a bug for manually format failure on MT6228 NFB EVB.

New features:
1. -[FlashTool/BROM_DLL] Support Multi-Load Autodetection Download.
-[FlashTool/BROM_DLL/DA] Support 6229 Download, add m_emi_gen_c in DRAM setting
2. [DA] Support High-Address-Bus pins test for NOR Flash.
3. [DA] Supports new NOR flash device.
[SHARP] LRS18BK
[INTEL] 28F3204C3TD70, [MemoCom] KS03204
4. [DA] Supports new NAND flash device.
[TOSHIBA] TC58NWM9S3B

Download HERE

Thanks @Hoang for info and download!!

B.R.

---

sao e ko down đc a nhỉ ?

Đúng đó toàn thấy nói ko hà , chẳng thấy link download đâu hết à?