J100H mất boot

em nhận cây J100H khởi động liên tục , uprom song mất nguồn , repair emmc by ATF vẫn vây , nhà có mỗi riff và atf active thôi ạ ,ae có võ nào chỉ em với

xem cái log repair với bạn

CID : 90014A483447326211017550F2D47209
CSD : D07F01320F5903FFFFFFFFEF8A4040DB

eMMC Boot Information
Revision 1.6 (for MMC v4.5, v4.51)
BOOT PARTITION : BOOT PARTITION 1
PARTITION ACCESS : R/W USER PARTITION
PERM_BOOT_CFG_PROT : DISABLED
PWR_BOOT_CFG_PROT : DISABLED
BOOT MODE : x1 SINGLE DATA RATE + LOW SPEED
RESET BUS WIDTH : ENABLED
eMMC FirmW UPDATE : DISABLED
EMMC CACHE SIZE : 0 KB
SUPER PAGE SIZE : 3072 KB
HC ERASE GROUP SIZE: 512 KB
USER AREA SIZE : 3909091328 BYTES
BOOT PARTITION SIZE: 4096 KB
RPMB PARTITION SIZE: 4096 KB


eMMC Device Information
Manufacturer ID: HYNIX
Device Type : Embedded BGA
Application ID : 4A
Product Name : H4G2b
Product Rev : 0.1
Product SN : 7550F2D4
Manufactured : January 1999

Card Specific Data
CSD_STRUCTURE : Extended
SPEC_VERS : Version 4.1/4.2/4.3
TAAC : 8000 ns
TRAN_SPEED : 4000000 KHz
READ_BL_LEN : 512 Bytes
C_SIZE : HIGH CAPACITY
WP_GRP_ENABLE : YES
WRITE_BL_LEN : 512 Bytes
CONTENT_PROT_APP : NO
PERM_WRITE_PROTECT: NO
TMP_WRITE_PROTECT : NO

Extended CSD Saved:
90014A483447326211017550F2D47209.ext_csd
Backup Directory:
C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\


MBR is Corrupted...


Start Writing Flash Images...

Flash Image: MBR + PGPT
Start Writing 0x00000032 Blocks at 0x00000000
Partition Selected: USER AREA

Total Elapsed Time 00:00:04
Write Success!


Flash Image: PIT
Start Writing 0x0000000A Blocks at 0x00000022
Partition Selected: USER AREA

Total Elapsed Time 00:00:02
Write Success!


Flash Image: SGPT
Start Writing 0x00000021 Blocks at 0x00747FDF
Partition Selected: USER AREA

Total Elapsed Time 00:00:03

Flash Image: boot.img
Start Writing 0x00008000 Blocks at 0x00022800
Partition Selected: USER AREA

Total Elapsed Time 00:01:14
Write Success!


Flash Image: recovery.img
Start Writing 0x00008000 Blocks at 0x0002A800
Partition Selected: USER AREA

Total Elapsed Time 00:00:32
Write Success!


Flash Image: sprdcp.img
Start Writing 0x00004000 Blocks at 0x00008000
Partition Selected: USER AREA

Total Elapsed Time 00:00:18
Write Success!


Flash Image: sprddsp.img
Start Writing 0x00002000 Blocks at 0x00006000
Partition Selected: USER AREA

Total Elapsed Time 00:00:09
Write Success!


Flash Image: nvitem.bin
Start Writing 0x00000800 Blocks at 0x00004800
Partition Selected: USER AREA

Total Elapsed Time 00:00:05
Write Success!

log repair ok. mấy cái emmc HINIX hay bị cà tưng lắm. nhanh gọn thì thay emmc khác cho nhanh.