-
Smart-Clip2 Software v1.26.10 is out!
https://smart-clip2.com/nfs/content/...mart-clip2.jpg
Released FLASH via fastboot mode feature for latest Huawei smartphones
based on Qualcomm and HiSilicon.
This feature can be used for phones that won’t turn on, freeze on logo, etc.,
but still can enter fastboot mode.
Procedure:
1. Connect the phone in fastboot mode (vol- power ON) to PC.
2. Select corresponding update.app firmware file and revive device with Sigma
Benefits:
♦ Full/partial write of firmware partitions
♦ FAST direct firmware write via fastboot mode
♦ Flash of regular update.app files to devices with locked bootloader
♦ Possible to use original flash files from open sources, e.g. from here or here
This feature is available without limitations for all Smart-Clip2 users with Pack5 activated.
More soon!
Download Smart-Clip2 Software v1.26.10
-
Smart-Clip2 Software v1.26.10 is out!
https://smart-clip2.com/nfs/content/...mart-clip2.jpg
Released FLASH via fastboot mode feature for latest Huawei smartphones
based on Qualcomm and HiSilicon.
This feature can be used for phones that won’t turn on, freeze on logo, etc.,
but still can enter fastboot mode.
Procedure:
1. Connect the phone in fastboot mode (vol- power ON) to PC.
2. Select corresponding update.app firmware file and revive device with Sigma
Benefits:
♦ Full/partial write of firmware partitions
♦ FAST direct firmware write via fastboot mode
♦ Flash of regular update.app files to devices with locked bootloader
♦ Possible to use original flash files from open sources, e.g. from here or here
This feature is available without limitations for all Smart-Clip2 users with Pack5 activated.
More soon!
Download Smart-Clip2 Software v1.26.10
-
Smart-Clip2 Software v1.26.11 is out!
https://smart-clip2.com/nfs/content/12156/file/SC2.jpg
1. Released flashing via UPGRADE MODE feature for
Huawei smartphones based on Qcom and Hisilicon:
♦ Press vol+vol- and then connect USB cable to enter the Upgrade mode
♦ Possible to use original update.app flash files from open sources, e.g. from here or here
Please use this method as a main method to flash Huawei smartphones.
2. Released ENABLE DOWNGRADE feature (in Manufacture mode) for
Huawei smartphones based on Qcom/Hisilicon.
You may use it:
To downgrade phone’s firmware version - for example, downgrade from higher to lower one.
To change phone’s localization (for example, to switch from Operator1 to Operator2).
How to do that:
♦ Change provider settings (in manufacture mode)
♦ Enable downgrade (in manufacture mode)
♦ Flash the phone with the firmware that fits the selected provider settings
(Using upgrade mode: vol+vol-and powerON)
This solution is included into Pack 5 activation.
Download Smart-Clip2 Software v1.26.11
-
Smart-Clip2 Software v1.26.14 is out!
HiSilicon Tab:
Released Unlock, IMEI repair, Get bootloader code, FRP and ID remove,
Change provider (vendor/country) features support for:
♦ RNE-L01
♦ RNE-L02
♦ RNE-L03
♦ RNE-L21
♦ RNE-L22
♦ RNE-L23
♦ RNE-AL00
♦ G10
♦ Nova 2i
♦ Honor 9i
♦ G10 Plus
♦ Mate 10 Lite
Android ADB Tab:
New MTK smartphones in the list:
♦ Alcatel OT-5011 (MT6580)
♦ AMGOO A527 (MT6735)
♦ ASUS X008 (MT6735)
♦ Bmobile AX921 (MT6580)
♦ GiONEE P5W (MT6580)
♦ LENOVO PB2-670Y (MT6753)
♦ Lenovo A678T (MT6582)
♦ Meizu m2 note (MT6753)
♦ Nyx Jak (MT6572)
♦ Sky Elite 5.0 M (MT6735)
♦ XIAOMI Hongmi (MT6589)
♦ X4 storm (MT6570)
♦ ZTE Blade A510 (MT6735)
♦ ZTE Blade A602 (MT6737)
Qcom Tab:
Repair IMEI / Remove FRP features support for:
♦ Vodafone Smart V8
♦ Vodafone 710
♦ VDF710
Full list of new ZTE devices tested:
♦ Blade A512
♦ Blade A506
♦ Blade A310
♦ Blade A6
♦ Blade S7
♦ Blade V8
♦ Conexis X1
♦ Maven Z812
♦ Orange Neva 80
♦ Overture 2
♦ T920
♦ Turkcell T70
♦ Turkcell T80
♦ A0621
♦ Z813
♦ Z982
Flash File Area Update:
59 GB of Board flash files for Huawei devices uploaded to flash file area at Boot-Loader.com
This is just the beginning. We will add much more files soon.
Download Smart-Clip2 Software v1.26.14
-
Smart-Clip2 Software v1.26.15[/indent][/indent][/indent]HiSilicon Tab:
1. Released REPAIR feature for new type of Huawei smartphones:
♦ Honor V9
♦ MATE 9
♦ P10 Plus
♦ P10
♦ Mate 9 Pro
♦ Honor 9
Device should to be detected as VID12D1 PID3609 (HUAWEI USB COM 1.0)
in the System to be flashed using board software files.
You can find manuals and drivers here.
2. Increased speed for some operations in Fastboot mode
Android ADB Tab:
New MTK smartphones in the list:
♦ Lenovo K50a40 (MT6752)
♦ OPPO X9009 (MT6755)
Download Smart-Clip2 Software v1.26.15
-
Smart-Clip2 Software v1.26.16
HiSilicon Tab:
Added possibility to flash Huawei Factory flash files via fastboot mode
♦ This feature is applicable only for flashing Factory Firmware files in FastBoot mode
(NOT for factory fastboot and not for HUAWEI USB COM 1.0 cases)
♦ For advanced users only!
Procedure:
1. Set the phone to fastboot mode
2. Select Factory Flash File
3. Tick the box “Authorize”
4. Flash the Factory Flash File
Download Smart-Clip2 Software v1.26.16
-
Smart-Clip2 Software v1.26.17
Qcom Tab:
1. Released REPAIR feature for bricked Qualcomm Huawei smartphones
using board software files:
♦ G9 Lite / VNS-AL00
♦ Y6 / SCL-L21 / SCL-U23
♦ Honor 6A / DELHI-AL10A
♦ MediaPad T3 / KOB-W09
♦ MediaPad T3 10 / AGS-L03
♦ WATCH 2 / Leo-B09
Procedure:
1. Repair bricked device using board software file taken from boot-loader.com• Please read the manual carefully, because there are some differences between Qualcomm and HiSilicon groups!
• Board software files: boot-loader.com -> Downloads -> Sigma -> Huawei -> Board software
2. Flash the device in Fastboot mode using update.app firmware
3. Repair Vendor/Country, IMEI and other numbers
4. Repeat flashing in Upgrade mode using update.app firmware to finalize repair operation
Download Smart-Clip2 Software v1.26.17
-
Smart-Clip2 Software v1.27.00
Released REPAIR feature for new group of bricked Qualcomm Huawei smartphones
using board software files:
♦ Ascend G620S
♦ Ascend G630
♦ Ascend G6
♦ Ascend G7
♦ Ascend Mate2
♦ Ascend Y530
♦ Ascend Y635
♦ Ascend G660
♦ Ascend G730
♦ G8
♦ GR5
♦ Honor 4
♦ Honor 5X
♦ Honor 7i
♦ MediaPad T2 10.0 Pro
♦ MediaPad T1A21L
♦ MediaPad T1 10
♦ ShotX
You can find detailed info about flashing in the Factory mode here.
Some users flashed Huawei phones using Factory firmware in a “Full flashing” mode.
As a result all areas were flashed, including factory calibrations areas.
After flashing factory areas, phone’s network and other functions became unavailable.
To meet the needs of our users and to prevent the above mentioned situations,
we have made some changes in Sigma.
From now on, when selecting Full flashing mode,
you will have to additionally select factory calibrations areas.
Soon we will release Repair files for some models
to restore the phone’s operation after the above mentioned cases.
Card update is required.
Download Smart-Clip2 Software v1.27.00
-
Smart-Clip2 Software v1.27.01
HiSilicon and QCOM Tab:
Added Wi-Fi, Bluetooth, Serial numbers repair and Change Sim card mode
(single to dual) features for Huawei smartphones.
Android ADB Tab:
New MTK smartphones in the list:
♦ Alcatel U5 4047g (MT6580)
♦ Alps X410 (MT6572)
♦ Aprix Red Dragon (MT6735)
♦ Bmobile Ax1070 (MT6735)
♦ Bitel L640 (MT6XXX)
♦ DOOGEE F3 Pro (MT6753)
♦ Doppio sl452 (MT6735)
♦ Life Wireless X444 (MT6572)
♦ Lanix L1120 (MT6735)
♦ Lenovo VIBE S1 lite (MT6753)
♦ Nokia 3 (MT6735)
♦ Haier G61 (MT6735)
♦ HTC U Play (MT6755)
♦ Polaroid Jet C7 (MT6XXX)
♦ Tecno R6 (MT6735)
♦ Haier G700 F (MT6735)
♦ Nuu Mobile A1 (MT6580)
♦ Wiko Lenny 4 (MT6580)
Hungarian language has been added to the multilingual software interface.
Download Smart-Clip2 Software v1.27.01
-
Smart-Clip2 Software v1.27.03
MTK Tab:
MTK Calculator (unlock by IMEI and PID for Alcatel phones) has been updated
for the following models:
♦ OT-4034, OT-4034D, OT-4034E, OT-4034F, OT-4034G, OT-4034M, OT-4034N
♦ OT-5010, OT-5010D, OT-5010E, OT-5010G, OT-5010S, OT-5010U
♦ OT-5012, OT-5012F, OT-5012G
♦ OT-5015D
♦ OT-5025, OT-5025D, OT-5025E, OT-5025G
♦ OT-5042T, OT-5044P, OT-5047I
♦ OT-5085, OT-5085B, OT-5085D, OT-5085I
♦ OT-5085J, OT-5085N, OT-5085Q, OT-5085Y
♦ OT-5144, OT-5144O
♦ OT-8050, OT-8050D, OT-8050E, OT-8050G, OT-8050J
♦ OT-9003, OT-9203
♦ OT-D820
♦ OT-V300, OT-V301
♦ OT-V502, OT-V610
♦ VF1100, VF1296, VF1300
2300 new PIDs added for the above MTK phones
QCOM Tab:
1. Added FRP remove feature support for:
♦ Moto X4 XT1900
♦ ZTE Grand X3 Z959
2. Released Unlock, FRP unlock and IMEI repair for new Alcatel models (test mode):
♦ OT-A576RW
♦ OT-5044C
♦ OT-9024W
Android ADB Tab:
1. New MTK smartphones in the list:
♦ Alcatel 4049G (MT6570)
♦ AMGOO AM527 (MT6735)
♦ Avvio 550 Pro (MT6735)
♦ Swissmobility PRA557 (MT6735)
♦ LENOVO Lenovo TB3-730X (MT8735)
♦ Vestel Venus V3 5020 (MT6735)
♦ Vodafone VFD 100 (MT6572)
♦ Vodafone VFD 700 (MT6755)
♦ ZTE A112 (MT6735)
2. We have fixed minor customer-reported issues.
Download Smart-Clip2 Software v1.27.01
