🐙 Octoplus/Octopus Box LG v.2.2.1 - featuring LG Max and MS330 support! 🐙

Octoplus/Octopus Box LG Software v.2.2.1 Release Notes:

🐙 Added support for the following models:

- X155 - added world's first Direct Unlock, Read Codes, Repair IMEI (A / B), Read phone's Info
- X160 - added world's first Direct Unlock, Read Codes, Repair IMEI (A / B), Read phone's Info
- X165 - added world's first Direct Unlock, Read Codes, Repair IMEI, Read phone's Info
- X165G - added world's first Direct Unlock, Read Codes, Repair IMEI, Read phone's Info
- MS330 - added world's first Repair IMEI, Repair BT Address, Repair Wi-Fi Address, Read / Write / Repair NVM, Read / Write QCN, Read Security, Write Security Backup, Read Full Flash

🐙 Added Deactivate (McAfee) Kill Switch* operation for the following models:

- F400K, F400L, F400S (thanks to Mr. salman.wifi)

🐙 Fixed "Incompatible model ID" issues for LG AS323

🐙 All supported operations described in details in the manual ("Cable & Manual" button in Software)

* In order to perform "Deactivate Kill Switch" operation, you need to do the following:

1. Attach testpoint as shown on figure in manual, and connect phone with Micro USB cable (don't use USB hubs!).
   For some firmware versions, to put the phone into "Qualcomm-Mode", you can try to do the next: press and hold "Vol+" button and connect the phone directly to PC via micro USB cable
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn't installed a driver. Drivers are available in Installation Folder
3. Release testpoint and press "Deactivate Kill Switch" button
4. Follow Software instructions (prompts)

More info and discussion are HERE
___________________________________
WBR,
Octoplus Box Team