Cái này thấy bên vietfones có Post rồi,bên đây chưa có nên em post lên cho ace nào ai muốn tay không bắt cướp thì đem về dùng, ace nào có rồi đừng chém em, em chỉ muốn chia sẻ thôi:p.
vừa đem con 6233 ra làm chuột bạch kết quả ok ngọt như mía
http://buican.bang.vn/Load_Image/c6b...5b833/1024.jpg
Tải ở đây
tes done ae cứ múc thoải mái nhé chạy qua ufs
DLL not found...
BB5 Easy Service Tool v1.14.1 (c) Infinity-Box Team Ready
Connect phone on selected interface...
UFS S/N 79577 boot - Ok
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Read and Check phone data...
Infineon checking...
SIMLOCK TEST : Ok
RUN TEST : Ok
Booting phone now....
Sync Ok , A2
CPU ID : XGOLD , A200341100
Boot Ok , 01
PBL : SE0_091125 F11
Algo Ok , 01
SBL mode Ok
SBL : Default_RAM_Bootloader
EPP CFG [Bering]...
FLASH ID : 0020000000C08800
FLASH ID : ST, M58WR064
Boot Done!
Done!
Connect phone on selected interface...
Selected FlashSettings : Manual
-> File : rh105_05.710 not found! Check it!
-> File : rh105_05.71mr not found! Check it!
-> File : rh1050_nai5.71mr not found! Check it!
Files Set for Flashing :
Flash files not selected!!! Break...
Phone found!
Series 40 Device detected!
read info... - Ok
Selected FlashSettings : Manual
Files Set for Flashing :
MCU : rh105_05.710
PPM : rh105_05.71mr
CNT : rh1050_nai5.71mr
File damaged or Unknow format... :(
File damaged or Unknow format... :(
File damaged or Unknow format... :(
Check FlashFiles, Please, wait...
Bad file : rh105_05.710
Bad file : rh105_05.71mr
Bad file : rh1050_nai5.71mr
Bad Flash files detected, will break procedure :(
Selected FlashSettings : Manual
Files Set for Flashing :
MCU : rm647_003.600
PPM : rm647_003.60mr
CNT : rm6470_nai03.60mr
Infineon flashing...
Booting phone now....
Sync Ok , A2
CPU ID : XGOLD , A200341100
Boot Ok , 01
PBL : SE0_091125 F11
Algo Ok , 01
SBL mode Ok
SBL : Default_RAM_Bootloader
EPP CFG [Bering]...
FLASH ID : 0020000000C08800
FLASH ID : ST, M58WR064
Boot Done!
===Flashing [MCU]===
File : rm647_003.600
Image : hw_b2_rm647_r03.600.fls
Cert block found, sending....
Cert sent
Found 3 region(s)
Processing Region 1/3
Erase , Start : 0x00800000 , Len : 0x00210000
Erasing, wait ...
Erase done
Write , Start : 0x00800000 , Len : 0x00210000
Flashing , wait ...
Region flash done
Processing Region 2/3
Erase , Start : 0x00C60000 , Len : 0x001E8840
Erasing, wait ...
Erase done
Write , Start : 0x00C60000 , Len : 0x001E8840
Flashing , wait ...
Region flash done
Processing Region 3/3
Erase , Start : 0x00FFC000 , Len : 0x00000040
Erasing, wait ...
Erase done
Write , Start : 0x00FFC000 , Len : 0x00000040
Flashing , wait ...
Region flash done
Check : 4445
===Flashing [PPM]===
File : rm647_003.60mr
Image : hw_b2_rm647_003.60mr.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x00210000 , Len : 0x00118700
Erasing, wait ...
Erase done
Write , Start : 0x00210000 , Len : 0x00118700
Flashing , wait ...
Region flash done
Check : 5870
===Flashing [CNT]===
File : rm6470_nai03.60mr
Image : hw_b2_rm6470_nai03.60mr.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x00EB0000 , Len : 0x0004C5C0
Erasing, wait ...
Erase done
Write , Start : 0x00EB0000 , Len : 0x0004C5C0
Flashing , wait ...
Region flash done
Check : 86E6
Flashing done, rebooting...
-> Infineon info : Do FullFactory Sets after flashing
Flashing Done!
Init Service mode... Wait...
Afterflash settings...
SW ver : V 03.60
01-04-10
RM-647
(c) Nokia
IMEI : 352404055364689
PCode : 0593211
All done!
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
sao không hướng dẩn cụ thể a cho a e biết
vào seting chọn kết nối ufs rồi check chon file chạy như giao diên box khac thôi:cool:
cái này có chạy usb được không các proTrích:
Được post bởi quanghuy1990
cái này chạy =usb cũng ok.Trích:
Được post bởi thuy1986
Chắc bị fire dongle trả đũa đây mà.
buồn ghê mới sắm em nó được có mấy ngày
nếu ATF bị crack nữa thì còn nhiều anh em sẽ buồn.Trích:
Được post bởi tamquyen
hy vọng ATF đừng bị crack nếu không nước Lã không có để mà uống.:confused:
có ngay ATF crack cho modTrích:
Được post bởi THIÊN UY_GSM
Advancebox.2.20.Inc.Crack-rev.zip - 4shared.com - chia sẻ và lưu trữ - tải xuống tập tin trực tuyến
hướng dẫn sử dụng lun đi bác
bác hướng dẫn cụ thể chạy bằng USB điTrích:
Được post bởi QUANGTRUNG_GSM
em lấy 3110c ra làm chuột bạch kết quả ngủ luôn
trời ơi imei đẹp quá trời
nghe thấy chữ Crack là nổi ốc lên rồi
chọn qua ufs nhé bạn như hình [IMG]http://nm4.upanh.com/b2.s1.d4/b7a0cc...4.untitled.bmp[/IMG]Trích:
Được post bởi Quoc12
lôi con 6300 ra chạy qua ufs nhé bạn kết quả doneTrích:
Được post bởi manhdung81mobile
Trích:
DLL not found...
BB5 Easy Service Tool v1.14.1 (c) Infinity-Box Team Ready
Connect phone on selected interface...
UFS S/N 79577 boot - Ok
Connect phone on selected interface...
Selected FlashSettings : Manual
Files Set for Flashing :
MCU : rm217__07.21.mcusw
PPM : rm217__07.21.ppm_v
CNT : rm217__07.21.image_v_black
Check FlashFiles, Please, wait...
-> SWversion check skipped : Dead mode selected
Backup enabled, Will read Certificates now...
Setting FlashMode
FlashMode set Ok
1st boot Ok, C0
CMT part info :
CMT ASICID : 000000010000022600010006010C192101001101
CMT EM0 ID : 00000232
CMT EM1 ID : 00000353
CMT PUB ID : 19E000193C267E565B012E4A9ED7115EE71B8D77
CMT MODE ID : 00
CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID : 191EC665DFAAF68F
CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 220800EC , CMT , NOR
CMT Flash ID : 220800EC < SAMSUNG [SEC] => K8F5615ETM\K5G5629ATD
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo.fg
CMT Algo sent
CMT PAPUB : 7E6491E8D30494B45630BB3A8599F4E1C674C95500
Transmission mode : Dual (Ddr, TX2)
Boot Done!
CMT : Read NPC certificate...
Cert size : 12288 byte(s)
IMEI : 359317025905220
CMT : Read CCC certificate...
Cert size : 8192 byte(s)
CMT : Read HWC certificate...
Cert size : 12288 byte(s)
CMT : Read VARIANT certificate...
Cert size : 20480 byte(s)
Cert Read done!
Init Service mode... Wait...
Init Service Mode Failed!
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
RPL saved : C:\Documents and Settings\Admin\Desktop\BEST infinity\BEST infinity\Backup\Cert\359317025905220_CRT.rpl
Setting FlashMode
FlashMode set Ok
1st boot Ok, C0
CMT part info :
CMT ASICID : 000000010000022600010006010C192101001101
CMT EM0 ID : 00000232
CMT EM1 ID : 00000353
CMT PUB ID : 19E000193C267E565B012E4A9ED7115EE71B8D77
CMT MODE ID : 00
CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID : 191EC665DFAAF68F
CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 220800EC , CMT , NOR
CMT Flash ID : 220800EC < SAMSUNG [SEC] => K8F5615ETM\K5G5629ATD
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo.fg
CMT Algo sent
CMT PAPUB : 7E6491E8D30494B45630BB3A8599F4E1C674C95500
Transmission mode : Dual (Ddr, TX2)
Boot Done!
Transmission mode : Dual (Ddr, TX2)
Erase : Processing rm217__07.21.mcusw
Found 9 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x00000000 - 0x000006BF
CMT , NOR , Area : 0x000006C0 - 0x0001FFFF
CMT , NOR , Area : 0x00020000 - 0x0007FFFF
CMT , NOR , Area : 0x00080000 - 0x000DFFFF
CMT , NOR , Area : 0x00100000 - 0x001FFFFF
CMT , NOR , Area : 0x00200000 - 0x0031FFFF
CMT , NOR , Area : 0x00320000 - 0x0105FFFF
CMT , NOR , Area : 0x01060000 - 0x01067FFF
CMT , NOR , Area : 0x01068000 - 0x0107FFFF
Using TimeOut : 5 min ( 300 sec )
Erasing, wait.....
Erase error! Conection lost :(
Error on Erasing Phone!
Error... :(
Connect phone on selected interface...
Selected FlashSettings : Manual
Files Set for Flashing :
MCU : rm217__07.21.mcusw
PPM : rm217__07.21.ppm_v
CNT : rm217__07.21.image_v_black
Check FlashFiles, Please, wait...
-> SWversion check skipped : Dead mode selected
Backup enabled, Will read Certificates now...
Setting FlashMode
FlashMode set Ok
1st boot Ok, C0
CMT part info :
CMT ASICID : 000000010000022600010006010C192101001101
CMT EM0 ID : 00000232
CMT EM1 ID : 00000353
CMT PUB ID : 19E000193C267E565B012E4A9ED7115EE71B8D77
CMT MODE ID : 00
CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID : 191EC665DFAAF68F
CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 220800EC , CMT , NOR
CMT Flash ID : 220800EC < SAMSUNG [SEC] => K8F5615ETM\K5G5629ATD
FLCNT : 000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo.fg
CMT Algo sent
PAPUBkeys blank (erased or HW failure)
Transmission mode : Dual (Ddr, TX2)
Boot Done!
CMT : Read NPC certificate...
Cert size : 0 byte(s)
CMT : Read CCC certificate...
Cert size : 0 byte(s)
CMT : Read HWC certificate...
Cert size : 0 byte(s)
CMT : Read VARIANT certificate...
Cert size : 0 byte(s)
No any CRT data (MCU damaged/CERT erased), skip saving
Init Service mode... Wait...
Init Service Mode Failed!
Setting FlashMode
FlashMode set Ok
1st boot Ok, C0
CMT part info :
CMT ASICID : 000000010000022600010006010C192101001101
CMT EM0 ID : 00000232
CMT EM1 ID : 00000353
CMT PUB ID : 19E000193C267E565B012E4A9ED7115EE71B8D77
CMT MODE ID : 00
CMT R_HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID : 191EC665DFAAF68F
CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg
CMT Loader sent, Boot Ok
MCU Configuration
FLASHID : 220800EC , CMT , NOR
CMT Flash ID : 220800EC < SAMSUNG [SEC] => K8F5615ETM\K5G5629ATD
FLCNT : 000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo.fg
CMT Algo sent
PAPUBkeys blank (erased or HW failure)
Transmission mode : Dual (Ddr, TX2)
Boot Done!
Transmission mode : Dual (Ddr, TX2)
Erase : Processing rm217__07.21.mcusw
Found 9 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x00000000 - 0x000006BF
CMT , NOR , Area : 0x000006C0 - 0x0001FFFF
CMT , NOR , Area : 0x00020000 - 0x0007FFFF
CMT , NOR , Area : 0x00080000 - 0x000DFFFF
CMT , NOR , Area : 0x00100000 - 0x001FFFFF
CMT , NOR , Area : 0x00200000 - 0x0031FFFF
CMT , NOR , Area : 0x00320000 - 0x0105FFFF
CMT , NOR , Area : 0x01060000 - 0x01067FFF
CMT , NOR , Area : 0x01068000 - 0x0107FFFF
Using TimeOut : 5 min ( 300 sec )
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:00:16
Transmission mode : Dual (Ddr, TX2)
Write : Processing rm217__07.21.mcusw
CMT: Writing Hash CERT [NOLO]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [PMM_CONF]
CMT: Writing Hash CERT [SBIF_CONF]
Total writen 943 blocks
TIME : Write time : 00:01:53
Transmission mode : Dual (Ddr, TX2)
Erase : Processing rm217__07.21.ppm_v
Found 1 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x01080000 - 0x015FFFFF
Using TimeOut : 5 min ( 300 sec )
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:00:15
Transmission mode : Dual (Ddr, TX2)
Write : Processing rm217__07.21.ppm_v
Total writen 330 blocks
TIME : Write time : 00:00:40
ConvertImage: Processing rm217__07.21.image_v_black
ConvertImage: Page Size is 64K, converting...
ConvertImage: File converted
Transmission mode : Dual (Ddr, TX2)
Erase : Processing rm217__07.21.image_v_black_128
Found 1 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x01600000 - 0x01FDFFFF
Using TimeOut : 5 min ( 300 sec )
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:00:27
Transmission mode : Dual (Ddr, TX2)
Write : Processing rm217__07.21.image_v_black_128
Total writen 320 blocks
TIME : Write time : 00:00:38
Init Service mode... Wait...
Init Service mode Failed! Skip AfterFlash :(
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
[IMG]http://nm0.upanh.com/b6.s29.d2/55a9d...45027070.2.bmphttp://nm3.upanh.com/b2.s29.d2/45253...45027123.3.bmp[/IMG]
test 2690 OK
Phone found!
Series 40 Device detected!
read info... - Ok
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm635__10.65.mcusw
PPM : rm635__10.65.ppm_v
CNT : rm635__10.65.image_v_silver
Flashing phone now...
Check files done...
-> SWversion check skipped : Manual mode selected
Backup CRT308 data...
CRT308 Backup Created... :)
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...
RPL saved : C:\DOCUME~1\abc\LOCALS~1\Temp\Rar$EX85.184\BEST infinity\Backup\Cert\353753046032873_SIM.rpl
-> MMC pass Record found, saving...
Batery valtage : 3784 mV
-> Batery voltage less, than 3,8V (3784mV). Continue at user risk
Getting product info...
RAP_BOOT: 0803000302010000
RAP_PUBLIC: 0A00010E3B270156248983C27A65325EF32F85A5
CMT_ROOTKEY: 9DDBFCFE6E73CED7D8C6268C8EB85723
RAP_PAPUBKEY: C6B9354E81AC464DED33FC7B90295086150F4539
Checking CNT sector PN<>FL
PN CNT sector : 128 kb
ConvertImage: Processing rm635__10.65.image_v_silver
ConvertImage: Page Size is 128K, no need convert
Loader len: 300160, CHK: 40AC
ADL -> Sending loader...
Update Server code succesfully sent to phone!
TIME : Boot time : 00:00:05
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : Check data
ADL : Data accepted
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing rm635__10.65.mcusw
Found 6 areas to erase
Erasing area 0x00000000 - 0x000006BF, NOR, CMT
Result: 0000
Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT
Result: 0000
Erasing area 0x00040000 - 0x000BFFFF, NOR, CMT
Result: 0000
Erasing area 0x000C0000 - 0x0013FFFF, NOR, CMT
Result: 0000
Erasing area 0x00140000 - 0x0137FFFF, NOR, CMT
Result: 0000
Erasing area 0x01380000 - 0x0151FFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:02:20
Write : Processing rm635__10.65.mcusw
Total 1165 [1165/0/0] blocks to write, writing...
CMT : Writing Hash CERT [NOLO]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [UPDAPP]
CMT : Writing Hash CERT [DSP0]
CMT : Writing Hash CERT [MCUSW]
TIME : Write time : 00:00:54
MCU Write done
===Flashing [PPM]===
Erase : Processing rm635__10.65.ppm_v
Found 1 areas to erase
Erasing area 0x01520000 - 0x01DBFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:00:58
Write : Processing rm635__10.65.ppm_v
Total 260 [260/0/0] blocks to write, writing...
TIME : Write time : 00:00:12
PPM Write done
===Flashing [CNT]===
Erase : Processing rm635__10.65.image_v_silver
Found 2 areas to erase
Erasing area 0x01DC0000 - 0x0215FFFF, NOR, CMT
Result: 0000
Erasing area 0x02160000 - 0x03FBFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:05:40
Write : Processing rm635__10.65.image_v_silver
Total 640 [640/0/0] blocks to write, writing...
TIME : Write time : 00:00:30
CNT Write done
ADL : End flashing
Flashing done!
Total flash time : 00:10:36
Reboot phone now...
Reading Phone Info....
Connected phone - Nokia 2690
Software Info: V 10.65 09-12-10 RM-635 (c) Nokia
IMEI: 353753046032873
PPM version : V 10.65 09-12-10 RM-635 (c) Nokia V
Product code: 0592505
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
P/S : only 14 days left to buy a license -- dùng thử nghiệm 14 ngày anh em nhé
mấy mod nhà ta xung gớm thấy mấy forum khác ko ai dám tets ;)
hahao tool crack j mà phần Misc có chữ ************************************ YOU PANUA nghĩa là j vậy mấy bác
Test thành công trên 3110c die USB nhé
Trích:
BB5 Easy Service Tool v1.14.1 (c) Infinity-Box Team Ready
Connect phone on selected interface...
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : 3110c_TV_OK.mcusw
PPM : 3110c_TV_OK.ppm_v
CNT : 3110c_TV_OK.image_ora_pl_games_128
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Getting product info...
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response.
[BB5 FLASH]: Bootrom Ok!
RAP_PUB: 0A60010BE9257E563474BBE2B90A141A96DF4769
CMT_ROOT: BAF3A9C3DBFA8454937DB77F2B8852B1
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing UPDAPP...
Processing PASUBTOC...
TIME : Boot time : 00:00:05
Reopening the connection...
Waiting for response: 30
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : Check data
ADL : Data accepted
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing 3110c_TV_OK.mcusw
Found 9 areas to erase
Erasing area 0x00000000 - 0x000006BF, NOR, CMT
Result: 0000
Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT
Result: 0000
Erasing area 0x00020000 - 0x0007FFFF, NOR, CMT
Result: 0000
Erasing area 0x00080000 - 0x000DFFFF, NOR, CMT
Result: 0000
Erasing area 0x00100000 - 0x001FFFFF, NOR, CMT
Result: 0000
Erasing area 0x00200000 - 0x0031FFFF, NOR, CMT
Result: 0000
Erasing area 0x00320000 - 0x0105FFFF, NOR, CMT
Result: 0000
Erasing area 0x01060000 - 0x01067FFF, NOR, CMT
Result: 0000
Erasing area 0x01068000 - 0x0107FFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:02:14
Write : Processing 3110c_TV_OK.mcusw
Total 945 [945/0/0] blocks to write, writing...
CMT : Writing Hash CERT [NOLO]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : PAPUBKEYS skip, already sent
CMT : Writing Hash CERT [UPDAPP]
CMT : Writing Hash CERT [DSP0]
CMT : Writing Hash CERT [MCUSW]
CMT : Writing Hash CERT [PMM_CONF]
CMT : Writing Hash CERT [SBIF_CONF]
TIME : Write time : 00:00:45
MCU Write done
===Flashing [PPM]===
Erase : Processing 3110c_TV_OK.ppm_v
Found 1 areas to erase
Erasing area 0x01080000 - 0x0151FFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:00:38
Write : Processing 3110c_TV_OK.ppm_v
Total 279 [279/0/0] blocks to write, writing...
TIME : Write time : 00:00:13
PPM Write done
===Flashing [CNT]===
Checking content info...
Resetting phone...
Checking CNT sector PN<>FL
PN CNT sector : 128 kb
ConvertImage: Processing 3110c_TV_OK.image_ora_pl_games_128
ConvertImage: Page Size is 128K, no need convert
Loader len: 253888, CHK: 17DB
ADL -> Sending loader...
Reset connection...
ADL : Check data
ADL : Data accepted
ADL : ASIC CMT select Ok
Erase : Processing 3110c_TV_OK.image_ora_pl_games_128
Found 1 areas to erase
Erasing area 0x01520000 - 0x01FDFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:01:44
Write : Processing 3110c_TV_OK.image_ora_pl_games_128
Total 296 [296/0/0] blocks to write, writing...
TIME : Write time : 00:00:14
CNT Write done
ADL : End flashing
Flashing done!
Total flash time : 00:05:50
Reboot phone now...
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Checking User Certificates...
Total - 0 certs
Uploading certificates...
Writen 0 certs!
AfterFlash operations done... Reconnect, wait...
Done!
Elapsed: 00:07:00
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
mong Pro cho xin cái video hoặc hướng dẫn sử dụng . cảm ơn
nokia bây giờ nếu anh em không có điều kiện chỉ hwk + tool phoenix là chơi đuọc tuốt nạp log dct4 cũng ok nếu hay gặp máy lỗi SD và Congfikey thì thêm mxbox có điều kiện thì ATF làm việc đc cả 2
dùng crack như kiểu sống chung với lũ
hôm qua tets con 6300ok , nhưng xui vãi tè con 2700c đi bụi bộ , chuyển qua không có box nào flash đc hết , crad cũng ớn ớn quá, 2700c ae nên thận trọng khi dùng tool crad , 2700c bá bệnh hiểm nghèo
Trước khi test chưa khẳng định chắc chắn được hay không nên backup đầy đủ lại nhé
khi dùng 1 thời gian dài thấy ok hết rùi thì tiến hành múc mạnh hơn :D
test ok trên 6300
DLL not found...
BB5 Easy Service Tool v1.14.1 (c) Infinity-Box Team Ready
Connect phone on selected interface...
Error open UFS #105991
UFS S/N 105991 boot error...
Connect phone on selected interface...
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm217__07.30.mcusw
PPM : rm217__07.30.ppm_r
CNT : rm217__07.30.image_ctv_cn_black
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Getting product info...
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
-> Phone not found.. :(
-> Error while flashing... :(
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm217__07.30.mcusw
PPM : rm217__07.30.ppm_r
CNT : rm217__07.30.image_ctv_cn_black
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Getting product info...
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response.
[BB5 FLASH]: Bootrom Ok!
RAP_PUB: 11000207FC507C5696193B87EB84F7D64C997ADC
CMT_ROOT: BAF3A9C3DBFA8454937DB77F2B8852B1
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing UPDAPP...
Processing PASUBTOC...
TIME : Boot time : 00:00:05
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : Check data
ADL : Data accepted
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing rm217__07.30.mcusw
Found 9 areas to erase
Erasing area 0x00000000 - 0x000006BF, NOR, CMT
Result: 0000
Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT
Result: 0000
Erasing area 0x00020000 - 0x0007FFFF, NOR, CMT
Result: 0000
Erasing area 0x00080000 - 0x000DFFFF, NOR, CMT
Result: 0000
Erasing area 0x00100000 - 0x001FFFFF, NOR, CMT
Result: 0000
Erasing area 0x00200000 - 0x0031FFFF, NOR, CMT
Result: 0000
Erasing area 0x00320000 - 0x0105FFFF, NOR, CMT
Result: 0000
Erasing area 0x01060000 - 0x01067FFF, NOR, CMT
Result: 0000
Erasing area 0x01068000 - 0x0107FFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:00:51
Write : Processing rm217__07.30.mcusw
Total 944 [944/0/0] blocks to write, writing...
CMT : Writing Hash CERT [NOLO]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [UPDAPP]
CMT : Writing Hash CERT [DSP0]
CMT : Writing Hash CERT [MCUSW]
CMT : Writing Hash CERT [PMM_CONF]
CMT : Writing Hash CERT [SBIF_CONF]
TIME : Write time : 00:01:15
MCU Write done
===Flashing [PPM]===
Erase : Processing rm217__07.30.ppm_r
Found 1 areas to erase
Erasing area 0x01080000 - 0x015FFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:00:16
Write : Processing rm217__07.30.ppm_r
Total 329 [329/0/0] blocks to write, writing...
TIME : Write time : 00:00:26
PPM Write done
===Flashing [CNT]===
Checking content info...
Resetting phone...
Checking CNT sector PN<>FL
PN CNT sector : 128 kb
ConvertImage: Processing rm217__07.30.image_ctv_cn_black
ConvertImage: Page Size is 64K, converting...
ConvertImage: File converted
Loader len: 248320, CHK: 36E3
ADL -> Sending loader...
Reset connection...
ADL : Check data
ADL : Data accepted
ADL : ASIC CMT select Ok
Erase : Processing rm217__07.30.image_ctv_cn_black_128
Found 1 areas to erase
Erasing area 0x01600000 - 0x01FDFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:00:40
Write : Processing rm217__07.30.image_ctv_cn_black_128
Total 296 [296/0/0] blocks to write, writing...
TIME : Write time : 00:00:23
CNT Write done
ADL : End flashing
Flashing done!
Total flash time : 00:03:54
Reboot phone now...
Reading Phone Info....
Connected phone - Nokia 6300
Software Info: V 07.30 07-05-09 RM-217 (c) Nokia.
IMEI: 356818023913523
PPM version : V 07.30 07-05-09 RM-217 (c) Nokia. R
Product code: 0554169
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Product code update...
Checking User Certificates...
Total - 0 certs
Uploading certificates...
Writen 0 certs!
Set phone to Normal mode...
AfterFlash operations done...
Done!
Elapsed: 00:04:41
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Phone disconected!
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Thank pro thật hay......
dùng crack thì chỉ flash cho vui thôi con lổi SD chắc ko giải quyet dc vấn đề
Bản crack này ko nhận hộp jaf hả bạn?
Vừa test 6300 usb done. thấy cũng hay hay
Xài cái này coi chừng mấy cái box kia nha , nó bụp hết mấy cái smartcard trong hộp là không ai bảo hành đâu nha.
chạy phonix cho chắc ăn
chưa hiểu lắm ai có giải thích giùm.
Tool này hoạt động độc lập giống phoniex hả, hay thông qua box hwk hay jaf hay mxkey, nếu thông qua box thì đúng là hành động liều lĩnh lỡ may hư box cái cắn lưỡi ah
tool này độc lập có thể flash qua cổng usb hoặc mượn cổng của ufsTrích:
Được post bởi ngocluc
tham khảo video flash 3110c này nhé
[YOUTUBE]o0kk5bKWZKo&feature=player_embedded#![/YOUTUBE]
Mình cũng mới tải về, chưa có con nào làm chuột bạch cả. Nhưng cho mìh hỏi có thể thông qua cổng của JAF dùng cáp đa năng để flash con 1280 được ko ta?
ae sau k biết chứ mình chay phà phà mấy dòng thấp tới mấy dong cao nâng v cho 5800 và c3 00 chỉ 1 phút ó thôi
khì chạy xong con máy ko may chết cài box là xong
cái này chạy usb hộp mcboox dc ko pro ơi
link die rồi anh ơi:cool:
Bác Ngoc Hoa ơi flash 1280 dc ko thế . minh chỉ chạy bb5 còn máy dòng kia ko chay đc. no báo bad Flash file mà sao chay dc
chạy ok tất cả các dòng nếu có HWK kết nối dùng để repair ?