các bác nào giúp em vấn dề này cái
tinh hình là em mới mua box volcano em và chua có nhìu kinh ngiem lắm .em mang cay connspeed M6 chíp mtk MT6252 DA mà khi vào phần chọn binout nó không chọn ra cổng com usb để flash nó cứ như thế này Volcano Updated: 2013-08-30
Connecting...
Connection successful,connected state!
Version: V3.8
SN:754-777-763
Port:COM3
After format or Flash you have to press & hold power button for at least 1.30 mins.
Note for win7 users :
Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
After that the spd drivers will have the ability to be loaded.
For many phones, charge pins need to be set in order to identify USB devices.
Detecting D+ and D-...
Vcc: 1
Gnd: 2 5
Detection initiated...
D+ = 6, D- = 8
Detection D+/D- with 1.66 seconds.
Continue to detect BOOT pin...
New USB device: (VID_0E8D&PID_0003)
UsbVcc(VCC) = 10, BOOT(Pull Down) = 3 4
Detection completed.
Adding the cable's title...
Cable title added successfully.
Setting pinouts...
Pinout setting complete.
Setting pinouts...
Pinout setting complete.
Setting pinouts...
>>Pinout setting complet
