-
Easy-JTAG Very HOT Update. v1.9.0.5 - KMVTU000LM REPAIR even totay dead emmc :)
Easy-JTAG Very HOT Update. v1.9.0.5 - FIRST IN THE WORLD!
NO ANY ADDITION ACTIVATION, NO ANY ADAPTERS.
LIKE USUALLY all hotest solution come free for all z3x users :)
Hope z3x users will repair today all bricked EMMC
After 6month of playing with EMMC we have new solution for you:
- KMVTU000LM-B503 [VTU00M] REPAIR
- READY CONDITION TIMEOUT ERROR REPAIR
- OCR READY TIMEOUT [EMMC BAD] REPAIR
- TOTALLY DEAD 00FF8080 REPAIR
This solution can repair 90% dead KMVTU000LM-B503 eMMC.
For work with solution you just need connect 1 MAGIC Z3X-TP for force EMMC firmware emmc mode.
Testpoin Location:
http://forum.gsmhosting.com/vbb/atta...9&d=1428411307
HERE is step by step repair with screenshots!
Here is Repair Manual:
1. Download latest Easy-Jtag install
2. Identify eMMC:
LOG:
OCR READY TIMEOUT [EMMC BAD]
Done.
3. Disconnect eMMC from power lines and easy-jtag box connector
(disconnect eMMCfrom box is important, because some voltage leakage via CMD, CLK, DAT0)
4. Make short testpoint [TP] to [GND] (solder small wire)
5. Plug eMMC power and connect Easy-Jtag box connector
6. Remove short [TP] to [GND]
7. Identify eMMC
LOG:
EMMC Date: 05/2005 Rev.0x56
EMMC NAME: 000000, S/N: 537986854
8. Start Custom Operation ->'SAMSUNG: eMMC Update Firmware'
9. Confirm eMMC Part Numbet 'KMVTU000LM-B503'
LOG:
Z3X EasyJtag Software ver. 1.9.0.5
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: XXXXXXXXXXXXXXXX, ,FW Ver.: 01.52
CMD Pullup Level:2052 mV
CMD Active Level:2588 mV
Setup firmware normal update mode, wait 2..30 sec...
Success!
Sending eMMC firmware...
Success!
Verifying eMMC firmware...
Success!
Flashing eMMC firmware...
Success!
Repairing eMMC CID...
Success!
eMMC firmware is updated now!
Please reconnect eMMC power lines before next operation!
Please don't forget to repair extCSDfrom backup!
Please don't forget to configure BOOTsizes!
Done.
Now eMMC is alive !!! Enjoy!!!
P.S. COPY PASTERS - time for copy our solution. time to wake up
P.S2. Z3X users - we have lot of news for you in nearly future, be ready ;).
-
Easy-JTAG Very HOT Update. v1.9.1.0 are out! Breaking news inside!
Easy-JTAG Very HOT Update. v1.9.1.0 Lot of changes:
Improved Samsung eMMC firmware update protocol
Added Samsung eMMC firmwares for new eMMCs: - Samsung KMVYL000LM-B503 [VYL00M] Fix NAME 000000
- Samsung KMVYL000LM-B503 [VYL00M] Fix OCR READY TIMEOUT ERROR [EMMC DEAD])
- eMMC Repair FIRMWARE Samsung KMSJS000KA-B308 [SJS00A]
- eMMC Repair FIRMWARE Samsung KMV3U000LM-B304 [V3U00M]
- eMMC Repair FIRMWARE Samsung KLM8G2FB3B-D001 [M8G2FB]
Added NEW eMMC TP pinouts (Look inside sw folder: /EMMC TP PINOUTS)
Added via JTAG:- GSMART G1362 (Read/Write/Pinouts/Dump/RCP) FIRST IN THE WORLD!
Added via eMMC DIRECT(ISP)- Samsung GT-I9060(Read/Write/Pinout/Dump)
- LG P715(Read/Write/Pinout/Dump)
http://forum.gsmhosting.com/vbb/atta...1&d=1429288428
P.S. KMVYL000LM Repair solution are waiting for Smart Copy'n'Pasters.
P.P.S This solution are made in one day and free as every Z3X Update last 10 years.
-
EasyJtag Update v2.0.2.0 Released. Lot of new inside.
Added via JTAG:
- PRESTIGIO PAP5300 (Read/Write/JTAG_PINOUT/Dump/one click repair)
Adde via Direct EMMC(ISP)
- ALCATEL ONE TOUCH (IDOL) 6030X (Read/ Write/ EMMC_direct_pinout/Dump)
- SAMSUNG GT-I9158 (Read/ Write/ EMMC_direct_pinout/Dump)
- SAMSUNG GT-S7568 (Read/ Write/ EMMC_direct_pinout/Dump)
- HUAWEI MEADIAPAD 7 (Read/ Write/ EMMC_direct_pinout)
- ASUS ZENFONE 6 (Read/ Write/ EMMC_direct_pinout)
- ACER A200(Read/ Write/ EMMC_direct_pinout)
- LG G3 F460(Read/ Write/ EMMC_direct_pinout)
SD Unbrick CARD repaid new ZBIN:
- GT-I9506_I9506XXUAMHD_GPT_UEFI_4.2.2.zbin
- GT-I9295_I9295XXUBML3_GPT_UEFI_4.2.2.zbin
- GT-I9295_I9295XXUCNF1_GPT_UEFI_4.4.2.zbin
EMMC FIRMWARE UPDATE:
New FIRMWAREs:
KMV3W000LM-B310 [V3W00M] (VMX0 CONTROLLER)
KMS5X000KM-B313 [S5XKMB] (VPX0 CONTROLLER)
KLMAG2GE4A-A001 [MAG2GA]
NEW EMMC TP PINOUTS uploaded to support :
eMMC_TP_TYPE_5.jpg
eMMC_TP_TYPE_6.jpg
eMMC_TP_TYPE_7.jpg
eMMC_TP_TYPE_8.jpg
If need add something just goto -here
-
EasyJtag_Release_v2.0.4.0, new phones added via ISP and JTAG interface
EasyJtag_Release_v2.0.4.0 New phones
Added via JTAG:
- support LG E411G (Read/Write/JTAG_pinout/Dump/oneclickrepair)
Added via ISP(EMMC_DIRECT):
- support SAMSUNG SM-G313HZ (Read/Write/EMMC_ISP_pinout/Dump)
- support SAMSUNG SM-G386F (Read/Write/EMMC_ISP_pinout/Dump)
- support SAMSUNG GT-B5330L (Read/Write/EMMC_ISP_pinout/Dump)
- support LENOVO K910 (Read/Write/EMMC_ISP_pinout/Dump)
- support LG VS930 (Read/Write/Dump)
- support SAMSUNG SHV-E250K (Read/Write/EMMC_ISP_pinout)
Added via SD CARD REPAIR:
- SAMSUNG SM-G530FZ_G530FZXXU1AOF1_GPT_UEFI_4.4.4.zbin
- SAMSUNG SM-G530M_G530MUBU1AOA1_GPT_UEFI_4.4.4.zbin
-
EasyJTAG Release v2.0.5.1. New phones added
New phone added via direct EMMC:
- SAMSUNG SM-G900F (Read/Write/Dump/EMMC(isp)pinout)
- HTC DESIRE U PL11200 (Read/Write/Dump/EMMC(isp)pinout)
- HTC DESIRE 700 (Read/Write/Dump/EMMC(isp)pinout)
- SAMSUNG SM-G350E (Read/Write/EMMC(isp)pinout)
- SAMSUNG SCH-I905 (Read/Write/EMMC(isp)pinout)
- SAMSUNG GT-S7710 (Read/Write/EMMC(isp)pinout)
- ASUS PHONEPAD 7 (Read/Write/EMMC(isp)pinout)
New phone added via JTAG:
- TEXET 3204R AGM ROCK V5 (Read/Write/DUMP/One click repair)
-
Z3X EasyJtag Release v2.0.6.0. Update.
Added new phones via JTAG:
- HUAWEI IMPULSE 4G U8800 (Read/Write/Dump/One click Repair/Jtag Pinout)
- HUAWEI U8665 (Read/Write/Dump/One click Repair/Jtag Pinout)
- HUAWEI U8730 (Read/Write/Dump/One click Repair/Jtag Pinout)
Added new phones via direct EMMC:
- HUAWEI ASCEND Y530-U00 (Read/Write/Dump/EMMC(ISP) pinout)
- Samsung GT-P5210 (Read/Write/Dump/EMMC(ISP) pinout)
UI Changes:
- Write All function support extCSD writing
- Write now smart select all necessary dump parts , including extcsd file
- All Pinouts for eMMC and JTAG are displayed directly in software window
- All targets information now stored in XML file , including eMMC models , so
very soon we add new functions for one click eMMC configuration for different phones( boot with , sizes ,reset config etc )
Fixed:
- UAC admin rights request in addons
- path saving in open dialog of direct Odin , thanks layder_by
-
Best wishes for the holidays and happiness throughout the chinese New Year.
恭贺新禧,万事如意。
After long development period new EasyJTAG suite released.
EasyJtag Release v2.0.7.0 This time we generally worked on your requests to make EasyJTAG are best solution on market.
We happy to present you:
- DirecteMMC flasher for Qualcomm based phones
- eMMC CID editor and Patcher
- revolutionary ISP Mode
and many many new phones added!
Now STEP BY STEP:
- Samsung eMMC CID patching and editing ;)
This are beta feature , allow to Read Edit and Write
on most Samsung eMMC Chips , allow to make them capable
with some MTK preloaders with fixed eMMC name check.
Note1 - this will not fix 00000 or SDM32 errors.
This option allow rename alive eMMC chips to be capable with MTK Preloaders
Note2 - it necessary to reconnect chip after CID patch for correct finalise procedure
DO NOT make any other operations after CID patch without reconnecting phone!
- Direct_eMMC_QUALCOMM Tool
https://i.gyazo.com/dfeac06fdb04a28a...c912a85f08.jpg
Flashing QC rawprogramm firmwares directly to eMMC over ISP or Socket
Parsing of xml file for flashable parts and components
Feature GPT-EFI partitioning
Selective GPT-EFI writing parts by rawprogramm.xml
Automatic correction UEFI tables according eMMC physical size
Feature of backup eMMC UEFI partitions rawprogamXX.xml
- HiPower™ CLK Drive Mode
https://i.gyazo.com/72476fce235b9169...667899f794.jpg
https://i.gyazo.com/19f9da6c3965e30f...910acd0f44.jpg
https://i.gyazo.com/423022bae0617c7e...92407fcb58.jpg
We proud to present new age of eMMC ISP connection technology.
What HiPower™ technology in the depth:
Every ISP connection are affected to MCU interference to
eMMC link. Most importand interference make by CLK pin.
HiPower™ allow boost power of EasyJTAG© box up to 4x times.
HiPower™ technology are result of long time development and
discovery of hundreds phones. It allow to connect many phones* even
without using high cost power adapters. Just 4 wires! Forget mismatched
1.8V and 2.8V lines. Now we can use "natural" and "organic" power of
a embedded phone power controller - just solder 4 wires and plug USB.
What platform already tested with HiPower™ CLK Drive Mode*:
Most problematic ISP connection are in Nokia Lumia Devices
now we can say that fully support almost all Lumia eMMC ISP mode.
There are only one hidden feature implemented in 1.52
Note1 This function are not related to any Speed UPS or so! This functions are made for
improving ISP connection!
Now about new added phones:
Added via JTAG:
- support HUAWEI Y301-A01 (READ/WRITE/DUMP/ONE CLICK REPAIR/JTAG PINOUT)
- support COOLPAD FLO (READ/WRITE/DUMP/ONE CLICK REPAIR/JTAG PINOUT)
- support SAMSUNG GT-S5839I (READ/WRITE/DUMP/ONE CLICK REPAIR/JTAG PINOUT)
Added new phones via direct EMMC:
- support SAMSUNG SM-G355H (READ/WRITE/EMMC(ISP) PINOUT)
- support OPPO R821 (READ/WRITE/EMMC(ISP) PINOUT)
- support LENOVO A3000 (READ/WRITE/EMMC(ISP) PINOUT)
- support LG D380 (READ/WRITE/EMMC(ISP) PINOUT)
- support SONY XPERIA Z2 D6503 (EMMC(ISP) PINOUT)
- support SONY XPERIA Z1 COMPACT D5503 (EMMC(ISP) PINOUT)
- support SONY XPERIA TX LT29I (EMMC(ISP) PINOUT)
- support SONY XPERIA SL LT26II (EMMC(ISP) PINOUT)
- support SONY XPERIA MIRO ST23I (EMMC(ISP) PINOUT)
- support SONY XPERIA L C2105 (EMMC(ISP) PINOUT)
- support SONY XPERIA ACRO S LT26W (EMMC(ISP) PINOUT)
P.S. Stay turned , now we can continue work on MTK Direct eMMC Downloader , One Click eMMC repairs and many more interesting things.
-
EasyJtag Release v2.0.8.0
This time we generally worked on your requests to make EasyJTAG are best solution on market.
We happy to present you eMMC GP1 GP2 GP3 GP4 sizes editor and lot of new eMMC ISP Phones.
ISP phones. We keep updating JTAG models also.
Main Suite Changes:
- Added GP-1, GP-2, GP-3 or GP-4 partition size setting.
- Added GP-1, GP-2, GP-3 or GP-4 partition write reliability setting.
- Added Enhanced User Data Area parameter setting.
- Fixed access GP-1, GP-2, GP-3 or GP-4 partition..
- Fixed sparse images writing in plugins
- Drivers and plugins now are signed. So users will get rid of annoying windows 8, 8.1 and 10 warnings etc.
Added new phones via direct EMMC:
- Samsung SHV E250K ISP Pinout+Dumps Updated
- Samsung SHV E250K ISP Pinout+Dumps Added
- Samsung GT-S7262 ISP Pinout+Dumps Added World First ( New Spread ISP method added) *
- Samsung GT-B5330 ISP Pinout+Dumps Added
- Motorola XT1063 ISP Pinout+Dumps Added thanks Seba Kopp
- Motorola XT1064 ISP Pinout+Dumps Added thanks Seba Kopp
- Motorola XT1068 ISP Pinout+Dumps Added thanks Seba Kopp
- Motorola XT1550 ISP Pinout+Dumps Added thanks Seba Kopp
- LG D375 ISP Pinout+Dumps Added thanks Seba Kopp
- LG D431G ISP Pinout+Dumps Added thanks Seba Kopp
- LG D451G ISP Pinout+Dumps Added thanks Seba Kopp
- LG E612 ISP Pinout+Dumps Added
- LG E425 ISP Pinout Added thanks Seba Kopp
- LG P778G ISP Pinout+Dumps Added thanks Seba Kopp
- MTS 970H ISP Pinout Added
- SHW-M420S ISP Pinout Added thanks Black-Micron
Added new phones via JTAG :
- Samsung GT-I8700 Pinout + Dump
Screenshot:
http://forum.gsmhosting.com/vbb/atta...1&d=1459958282
*Spreadtrum ISP method require soldering if two jumpers and HiPower clock mode to be enabled. Also USB+VCC+VCCQ Power required also.
*Drivers signature are self signed e.g requrie root CA installing ( automated )
*We prepared very hot news for Z3X EasyJTAG owners. Keep turned!
JEDEC 4.5 General Purpose Partitions and Enhanced User Data Area configuration
General Purpose Partitions and Enhanced User Data Area configuration by the host can have effects on
data previously stored (they will be destroyed) and the device initialization time. In particular, the
initialization time after first power cycle subsequent to the configuration can exceed the maximum
initialization time defined by the specs since the internal controller could execute operations to set up the
configurations stated by the host.
More generally also the following initialization phases can be affected by the new configuration. Max
power up timings shall be specified in the device technical literature.
-
Z3X Emmc File Manager addon Released.
Z3X Emmc File Manager V1.0 addon Released.
About this update:
- The project is written "from scratch"
- The project is fully translated into C ++
- A brand-new NATIVE engine-driver for accessing the EXT2 / 3/4 File System
- All the functions of scanning partitions have been reworked.
- The ability to open a separately read partition without markup
- Partition manager in the form of a tree with information
- Full-featured file manager with the ability to view information, multiple choice of files
- Hot Links button for frequently accessing files (Contacts \ SMS \ Passwords, etc.)
- The ability to save both individual files and folders
- The ability to sort Files by Name \ Type \ Size \
- Ability to change the style of displaying files / folders
- Copying file / folder names to the clipboard
- Ability to quickly view a single file
- Reading section information
- Address bar with manual address input support
- Automatic folder structure buffering
- Automatic read buffer, which maximizes file read speed
- No hanging of the interface
- Saving the entire partition to the BIN format
- HiPower CLK Support
- Support voltage EMMC 1.8 / 2.8 / 3.3 volts
- Supports CLK bus frequency up to 21 MHz
Check EmmcFilemanagerManagerAddon_v1.3.exe on support.
Attached Thumbnails
-
Z3X EasyJTAG EasyEMMC Updates Arrived APR'2017
Hot sun shining after long cold windy days ;-) We proud to present our users a news features and models. More than 1000 Pinouts available for forensic recovery and data repair.
EasyJTAG 2.5.0.9 Classic: Added on support
Changes:
- Added SMART repost processing for eMMC 5.0 and eMMC 5.1 Chips
- Added read Android/Linux info from dump
- Added read Android/Linux info directly from connected eMMC
- Added Removing Android Locks ( Gesture PIN Password )
- Fixed some bugs regarding EXT4 Processing
- Fixed bug with single partition region writing
- Updated FS and Box SDK API's
EasyJTAG 1.0.0.44 Plus Added on support
Changes:
- Fixed Bugs that have been found through your crash report
- Fixed Minor changes to EasyFS.dll
- Added The project was completely rewritten as a Unicode version
- Added Option "Get firmware info" (version, date, etc.)
- Added Option "Skip unreadable blocks"
- Added Function "Remove WriteProtection"
- Added New S.M.A.R.T. information for EMMC revision 5.0 and higher
- Added Removing Android Locks ( Gesture PIN Password )
EMMC File Manager Tool fixed version uploaded
EmmcFilemanagerManagerAddon_v1.3_fix.exe - bugs fixed;
Support Updates added ISP and Dumps by requests and pinouts sender.
Added:
- ACER A3-A11 (ISP eMMC Pinout)
- ACER A701 (ISP eMMC Pinout)
- ADVAN S5H (ISP eMMC Pinout)
- ADVAN S5J (ISP eMMC Pinout)
- ALCATEL 6045K (ISP eMMC Pinout)
- ALCATEL OT-5054N (Read/Write/Dump/ISP eMMC Pinout)
- ALCATEL OT-6039Y (Read/Write/Dump/ISP eMMC Pinout)
- ASUS FONEPAD 7 FE170CG (ISP eMMC Pinout)
- ASUS FONEPAD 7 FE375CG (ISP eMMC Pinout)
- ASUS FONEPAD NOTE 6 (ISP eMMC Pinout)
- ASUS PADFONE S PF500KL (ISP eMMC Pinout)
- ASUS ZENFONE 4 T00I (ISP eMMC Pinout)
- ASUS ZENFONE 4S T00Q (ISP eMMC Pinout)
- COOLPAD 8297L-100 (Read/Write/Dump/ISP eMMC Pinout)
- CRIUS Q7A PLUS (Read/Write/Dump/ISP eMMC Pinout)
- FLY FS501 (ISP eMMC Pinout)
- HTC BUTTERFLY 2 (ISP eMMC Pinout)
- HTC DESIRE SV (ISP eMMC Pinout)
- HTC M9 0PJA100 (ISP eMMC Pinout)
- HTC ONE E9PLUS (Read/Write/Dump/ISP eMMC Pinout)
- HTC ONE S (ISP eMMC Pinout)
- HTC WINDOWS PHONE 8X PM23200 (ISP eMMC Pinout)
- HUAWEI ASCEND G510 (ISP eMMC Pinout)
- HUAWEI ASCEND G615-U10 (ISP eMMC Pinout)
- HUAWEI ASCEND G620S-L03 (ISP eMMC Pinout)
- HUAWEI ASCEND Y321 (ISP eMMC Pinout)
- HUAWEI G8 RIO-L03 (ISP eMMC Pinout)
- LENOVO A830 (ISP eMMC Pinout)
- LENOVO A850 (Read/Write/Dump/ISP eMMC Pinout)
- LENOVO ZUK Z1 (ISP eMMC Pinout)
- LG D170 (ISP eMMC Pinout)
- LG E465G (ISP eMMC Pinout)
- LG E988 (ISP eMMC Pinout)
- LG F160L (ISP eMMC Pinout)
- LG F460S (ISP eMMC Pinout)
- LG H221 (ISP eMMC Pinout)
- LG H340 (ISP eMMC Pinout)
- LG H440 (ISP eMMC Pinout)
- LG K420N (Read/Write/Dump/ISP eMMC Pinout)
- LG P725 (ISP eMMC Pinout)
- LG P760 (ISP eMMC Pinout)
- LUNA TG-L800S (ISP eMMC Pinout)
- MEIZU MX4 PRO (ISP eMMC Pinout)
- MOTOROLA XT1040 (ISP eMMC Pinout)
- MOTOROLA XT1072 (ISP eMMC Pinout)
- MOTOROLA XT1097 (ISP eMMC Pinout)
- MOTOROLA XT1527 (ISP eMMC Pinout)
- MOTOROLA XT1543 MOTO G3 (ISP eMMC Pinout)
- NOKIA LUMIA 520 RM-914 (ISP eMMC Pinout)
- NOKIA LUMIA 550 RM-1127 (ISP eMMC Pinout)
- NOKIA LUMIA 800 (Read/Write/Dump/ISP eMMC Pinout)
- NOKIA LUMIA 900 (Read/Write/Dump/ISP eMMC Pinout)
- NOKIA X RM-980 (Read/Write/Dump/ISP eMMC Pinout)
- NOKIA XL RM-1030 (Read/Write/Dump/ISP eMMC Pinout)
- OPPO R8106 (ISP eMMC Pinout)
- OPPO R8113 (ISP eMMC Pinout)
- OPPO R819 (ISP eMMC Pinout)
- PRESTIGIO PAP7600 (ISP eMMC Pinout)
- PRESTIGIO PMP7079D 3G QUAD (ISP eMMC Pinout)
- SAMSUNG GT-I900 (ISP eMMC Pinout)
- SAMSUNG GT-I9205 (ISP eMMC Pinout)
- SAMSUNG GT-N8020 (ISP eMMC Pinout)
- SAMSUNG GT-P5110 (Read/Write/Dump/ISP eMMC Pinout)
- SAMSUNG SCH-T989 (ISP eMMC Pinout)
- SAMSUNG SHV-E170K (ISP eMMC Pinout)
- SAMSUNG SHV-E379K (ISP eMMC Pinout)
- SAMSUNG SM-A300FU (Read/Write/Dump/ISP eMMC Pinout)
- SAMSUNG SM-G111M (ISP eMMC Pinout)
- SAMSUNG SM-G318HZ (ISP eMMC Pinout)
- SAMSUNG SM-G361F (ISP eMMC Pinout)
- SAMSUNG SM-G6000 (Read/Write/Dump/ISP eMMC Pinout)
- SAMSUNG SM-J200DS (Read/Write/Dump/ISP eMMC Pinout)
- SAMSUNG SM-T215 (ISP eMMC Pinout)
- SAMSUNG SM-T530 (ISP eMMC Pinout)
- SAMSUNG SM-T705 (Read/Write/Dump/ISP eMMC Pinout)
- SKY A888S (ISP eMMC Pinout)
- SONY C1505 (ISP eMMC Pinout)
- SONY C5 E5553 (Read/Write/Dump/ISP eMMC Pinout)
- SONY C5302 (ISP eMMC Pinout)
- SONY D2202 (ISP eMMC Pinout)
- SONY D5103 (ISP eMMC Pinout)
- SONY E2353 (ISP eMMC Pinout)
- SONY E6553 Z3PLUS (ISP eMMC Pinout)
- SONY XPERIA Z1 (ISP eMMC Pinout)
- VIVO X1W (ISP eMMC Pinout)
- VIVO Y15 (ISP eMMC Pinout)
- XIAOMI REDMI 1S (ISP eMMC Pinout)
- XIAOMI REDMI 2 (ISP eMMC Pinout)
- XIAOMI REDMI 2A (ISP eMMC Pinout)
- XIAOMI REDMI 2S (ISP eMMC Pinout)
- **** C2 (ISP eMMC Pinout)
- ZTE LEO M1 (ISP eMMC Pinout)
- ZTE V970 (Read/Write/Dump/ISP eMMC Pinout)
http://forum.gsmhosting.com/vbb/atta...1&d=1493279380