xin giúp hộp atf

mình chạy bằng đường usb với các dòng máy asha , nhưng ko hiêu sao trong luc mình chọn file thì mình có chon luôn chế độ chạy song file thì tự factory reset nhưng sao đến lúc chạy hết 3file song thì nó ko reset đc đây là log mình chạy máy asha 305 xin ae giup thanks all
Number of Image Files: 3

Processing Image File :
rm766__05.92.mcusw
Processing Image File :
rm766__05.92.ppm_u
Processing Image File :
rm766__05.92.image_001_u_059L0H6


AUTO SELECTED DEAD USB FLASHING...

If Phone Booting does not Start in 5 Seconds,
Then Perform Steps 1, 2, 3 and 4...

1. Remove USB and Battery...
2. Insert USB.
3. Insert Battery. (Some phones boot automatically)
4. Please Power on phone shortly...


Infineon USB Boot: F00A1FB300020303010100FF
Sending PBL...
PBL Successfully Sent...
Sending SBL...
SBL Successfully Sent...
Setting Transmission Speed Done...
Flash Chip Manufacturer: Samsung Electronics Corp.
Flash Boot Successful...
Unique Data: 123018192B15280E
Original Product Code: 059N2F8
Reading : CCC... OK!
Reading : HWC... OK!
Reading : NPC... OK!
RPL Backup was Successful...
Plain RPL saved to:
C:\AdvanceBox Turbo Flasher\Nokia\Backup\354552055635041\3545520556350 41_23935.rpl


Data Sections : 04
Current File : rm766__05.92.mcusw
Compile Name: rm766__05.92.mcusw_ebl_psi.fls
Image Type : Main Firmware
Data Size : 29117832 Bytes

Sending Certificate Block
FIRMWARE Certificate Block Sent Successfully...
Processing Section 01
FIRMWARE Erase Block: 0x40000000~0x4001FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 131072 bytes
Data Checksum: 1369
Uploading Data Blocks to phone...
Block Write Successful...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 02
FIRMWARE Erase Block: 0x40040000~0x4005FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 131072 bytes
Data Checksum: 73CD
Uploading Data Blocks to phone...
Block Write Successful...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 03
FIRMWARE Erase Block: 0x40060000~0x4011FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 786432 bytes
Data Checksum: C572
Uploading Data Blocks to phone...
Block Write Successful...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 04
FIRMWARE Erase Block: 0x40120000~0x41BFFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 28065792 bytes
Data Checksum: 7F36
Uploading Data Blocks to phone...
Block Write Successful...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 05
FIRMWARE Erase Block: 0x43EE0000~0x43EFFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Data Verification Successful...


Data Sections : 01
Current File : rm766__05.92.ppm_u
Compile Name: package_u.ppm_ebl_psi.fls
Image Type : PPM Image
Data Size : 7106128 Bytes

Sending Certificate Block
PPM Certificate Block Sent Successfully...
Processing Section 01
PPM Erase Block: 0x41C00000~0x423FFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 7102784 bytes
Data Checksum: A2A6
Uploading Data Blocks to phone...
Block Write Successful...
PPM Data Blocks uploaded to phone...
Data Verification Successful...


Data Sections : 01
Current File : rm766__05.92.image_001_u_059L0H6
Compile Name: package_u_059L0H6.image.fls
Image Type : CONTENT Package
Data Size : 13634832 Bytes

Sending Certificate Block
CONTENT Certificate Block Sent Successfully...
Processing Section 01
CONTENT Erase Block: 0x42400000~0x43EDFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 13631488 bytes
Data Checksum: 4623
Uploading Data Blocks to phone...
Block Write Successful...
CONTENT Data Blocks uploaded to phone...
Processing Section 02
CONTENT Erase Block: 0x43F00000~0x43F7FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Data Verification Successful...
Total Flashing Time (Erase + Flashing) : 00:03:17
(Booting time is NOT Included)

Waiting for Phone to Start-Up..(Max 150 seconds)

Operation Cancelled...


Scanning USB Ports...

================================================== ====
ERROR: Active Phone Handle was NOT DETECTED
================================================== ====

TIP: Make sure that Phone USB Connection Mode is
OVI Suite Mode
or
PC Suite Mode

================================================== ====

Phone is not Connected OR it is not in the
Required Mode...
Reboot the Phone and Enable "PC Suite" Mode

thay sọi cáp khác đi pạn

mình cũng thay sợi khác rồi vẫn ko đc a ơi

mình thấy dùng BEST chạy mấy cái may asah có vẻ êm hơn