2730 contact sevice cần dúp
em nhận cây 2730 contact sevice em đã flass lại rùi đây là log của em nó ạ
MXKEY Serial: [FT SCR2000 0] - C0848F40
Connection status: UHCI:HUB::USB 2.00 (Full-speed)
Driver: NMWCD, ver: 7.1.32.67
Module ver: 1.0.0.18624(06-08-2011), Library ver: 1.0.0.12274(06-08-2011)
Processing MCU file: rm578__10.47.mcusw
[BB5,BB5 ALGORITHM] size: 21.65 MB
Supported Ids: 0103192101003000, 010C192101003000, 030C192101023000
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB device ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 2609CF45
CMT SYSTEM ASIC ID: 000000010000022600010006030C192101023000
CMT EM0 ID: 00000296
CMT EM1 ID: 00000B22
CMT PUBLIC ID: 0F90000A66F88D56080C87E27031FF780DE59DCA
CMT ASIC MODE ID: 00
CMT ROOT KEY HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROM ID: 273F6D55DFAAF68F
Flashing CMT Update Server Data, ULO: 0x3900 bytes
Update Server code succesfully sent to phone.
Flashing CMT Update Server Data, UPDAPP: 0x4B340 bytes
Update Server code succesfully sent to phone.
Flashing CMT Update Server Data, PASUBTOC: 0x59980 bytes
Update Server code succesfully sent to phone.
Waiting for USB device removal ...OK
Waiting for USB device arrival ...
Device connected: nmwcdnsuc\Nokia BB5 ADL Loader USB Generic, PORT_ID: 3AAFD673
Verifying communication to device OK.
Erase size: 23.25 MB
CMT FLASH,NOR area [00000000-000006BF] erased in 0.687 s
CMT FLASH,NOR area [000006C0-0001FFFF] erased in 0.703 s
CMT FLASH,NOR area [00040000-000BFFFF] erased in 2.579 s
CMT FLASH,NOR area [000C0000-0013FFFF] erased in 2.296 s
CMT FLASH,NOR area [00140000-0155FFFF] erased in 1 min 41.688 s
CMT FLASH,NOR area [01560000-0175FFFF] erased in 10.203 s
Flash programming ...
CMT NOLO block sent
CMT KEYS block sent
CMT PRIMAPP block sent
CMT PASUBTOC block sent
Selecting first CMT PAPUB block with matching RootKey.
CMT PAPUBKEYS: 8669C775 [RAP Certificate 215 v1] sent
CMT UPDAPP block sent
CMT DSP0 block sent
CMT MCUSW block sent
Programming completed in 1 min 16.875 s
Processing PPM file: rm578__10.47.ppm_x
[BB5,BB5 ALGORITHM] size: 6.78 MB
Supported Ids: 0103192101003000, 010C192101003000, 030C192101023000
Erase size: 8.62 MB
CMT FLASH,NOR area [01760000-01FFFFFF] erased in 43.031 s
Flash programming ...
Programming completed in 25.406 s
Processing CNT file: rm578__10.47_005.image_x_ctv_id_v2_4r0c9
[BB5,BB5 ALGORITHM] page size: 128 K size: 16.27 MB
Supported Ids: 0103192101003000, 010C192101003000, 030C192101023000
Erase size: 31.75 MB
CMT FLASH,NOR area [02000000-0245FFFF] erased in 27.672 s
CMT FLASH,NOR area [02460000-03FBFFFF] erased in 2 min 54.937 s
Flash programming ...
Programming completed in 1 min 0.281 s
Total time for flashing process(boot+erase+write) was 9 min 14.016 s
Waiting for USB device removal ...OK
Waiting for USB device arrival ...
Waiting for device boot up ...
Device connected: nmwcdc\Nokia 2730 classic USB Phonet, PORT_ID: 33864E32
Verifying communication to device OK.
Phone type: RM-578 (Nokia 2730 classic)
SW version: V 10.47 27-08-10 RM-578 (c) Nokia
Imei plain: 35937003485190-1
Product code: 0585313
Battery voltage: 3847 mV, current: 64 mA
Language Pack:
- not available.
Detected as PA_SL3 phone.
- Avoid SW Downgrade & manual erase to this phone !
SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST passed
Imei net: 359370034851901
Version: SIMLOCK SERVER
Counter: 0/3, 0/10
CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000
BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
FULL FACTORY... OK
USER DATA... OK
LEAVE FACTORY... OK
SERVICE CENTER... OK
SOFTWARE UPGRADE... OK
PRODUCTION TUNING... OK
Reset User Code (to default:12345) ... OK
Completed in 1.453 s
em đã thử flass lại bằng ATF log cũng đẹp long lanh à
sư huynh nòa có cao kiến gì chỉ dùm em với.em vẫn chưa làm phần chứng
