[Xin giúp] anh nào có kinh nghiệm xin giúp em 31110c lỗi phần mềm.

[duchung038]

tình hình là em có con 3110c chạy phàn mềm song là không hỗ trợ bọ sạc.truoc khi chưa chạy thì sạc ok. anh nào sem em họ cái log này nhe?cách sửa như thế nào?mx-box e chưa biết qua>mong anh em chỉ dẫn MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 3], SN: C0849028
Connection status: UHCI:HUB:HUB::USB 2.00 (Full-speed)
Driver: nmwcdnsuc, ver: 7.1.32.70
Module ver: 1.0.0.19045(08-10-2011), Library ver: 1.0.0.12920(08-10-2011)
Processing MCU file: rm237__07.30.mcusw
[BB5,BB5 ALGORITHM] size: 14.49 MB
Supported Ids: 0103192101001101, 010C192101001101
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB device ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 472EEA3
CMT SYSTEM ASIC ID: 000000010000022600010006010C192101001101 [RAPGSM ver: 1.1]
CMT EM0 ID: 00000232
CMT EM1 ID: 00000353
CMT PUBLIC ID: 1D90011275487E56AF00C1FA4ACB1B7E978FB9FF
CMT ASIC MODE ID: 00
CMT ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID: 191EC665DFAAF68F
Flashing CMT Update Server Data, ULO: 0x38C0 bytes
Update Server code succesfully sent to phone.
Flashing CMT Update Server Data, UPDAPP: 0x3DFC0 bytes
Update Server code succesfully sent to phone.
Flashing CMT Update Server Data, PASUBTOC: 0x4BF80 bytes
Update Server code succesfully sent to phone.
Waiting for USB device removal ...OK
Waiting for USB device arrival ...OK
Device connected: nmwcdnsuc\Nokia BB5 ADL Loader USB Generic, PORT_ID: 10688386
Verifying communication to device OK.
Erase size: 16.37 MB
CMT FLASH,NOR area [00000000-000006BF] erased in 0.891 s
CMT FLASH,NOR area [000006C0-0001FFFF] erased in 0.875 s
CMT FLASH,NOR area [00020000-0007FFFF] erased in 2.750 s
CMT FLASH,NOR area [00080000-000DFFFF] erased in 2.750 s
CMT FLASH,NOR area [00100000-001FFFFF] erased in 6.360 s
CMT FLASH,NOR area [00200000-0031FFFF] erased in 7.640 s
CMT FLASH,NOR area [00320000-0105FFFF] erased in 1 min 30.422 s
CMT FLASH,NOR area [01060000-01067FFF] erased in 0.797 s
CMT FLASH,NOR area [01068000-0107FFFF] erased in 0.813 s
Flash programming ...
CMT NOLO block sent
CMT KEYS block sent
CMT PRIMAPP block sent
CMT PASUBTOC block sent
Selecting first CMT PAPUB block with matching RootKey.
CMT PAPUBKEYS: C0E691EA [RAP Certificate 66 v2] sent
CMT UPDAPP block sent
CMT DSP0 block sent
CMT MCUSW block sent
CMT PMM_CONF block sent
CMT SBIF_CONF block sent
Programming completed in 54.500 s
Processing PPM file: rm237__07.30.ppm_b
[BB5,BB5 ALGORITHM] size: 2.89 MB
Supported Ids: 0103192101001101, 010C192101001101
Erase size: 4.62 MB
CMT FLASH,NOR area [01080000-0151FFFF] erased in 30.938 s
Flash programming ...
Programming completed in 11.016 s
Processing CNT file: rm237__07.30.image_b_era_pl2_128
[BB5,BB5 ALGORITHM] page size: 64 K size: 4.82 MB
Supported Ids: 0103192101001101, 010C192101001101
Erase size: 10.75 MB
CMT FLASH,NOR area [01520000-01FDFFFF] erased in 1 min 26.375 s
UCP page size is 128 K.
Flash programming ...
Programming completed in 17.969 s
Total time for flashing process(boot+erase+write) was 5 min 44.250 s
Waiting for USB device removal ...OK
Waiting for USB device arrival ...OK
Waiting for device boot up ...
Device connected: nmwcdc\Nokia 3110 classic USB Phonet, PORT_ID: 30D553EA
Verifying communication to device OK.


Phone type: RM-237 (Nokia 3110c)
SW version: V 07.30 07-05-09 RM-237 (c) Nokia.
Imei plain: 35934302895909-7
Battery voltage: 3853 mV, current: 137 mA
Language Pack:
- not available.

SIMLOCK seems to be valid
SUPERDONGLE_KEY invalid!
- WD timer enabled, phone will reboot itself after 3 min.
SIMLOCK_TEST passed
SECURITY_TEST passed


Imei net: 359343028959097
Version: SIMLOCK SERVER VERSION 63
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
Writing PM from Node ...

chú ý port bài đúng nơi quy định
đã move