Mọi người giúp mình với ạk
Cây B122 thay mic chả đụng chạm gì tự dưng thay xong mất nguồn, Kim lên 0.2 thả power ra thì rớt xuống về 0
CPU đóng chuẩn
Thay dao động
Flash, format đều không lên nguồn
Không biết nó hư chỗ nào nữa
Máy kỷ niẹm nên khách không chịu đền cái khác hoặc bù tiền 1 mực bảo đưa về hiện trạng cũ
Volcano Updated: 2014-08-08
Connecting...
Connection successful,connected state!
Version: V3.8
SN:306-692-699
Port:COM3
After format or Flash you have to press & hold power button for at least 1.30 mins.
Note for win7 users :
Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
After that the spd drivers will have the ability to be loaded.
Available Ports:COM3
Detection initiated, connect the phone and power on it...
Vcc: null
Gnd: 1
RX: 7, TX: 6
File versiZL75A04_PCB01_GPRS_MT6223P_S00.ZL75J_04A0_V1_ 0_4.BIN
Searching for passwords...
Could not find any potential passwords.
MTK6250/52 choose Boot V3.1108 or v5.1130 and try it.
Connecting...
Phone hardware version:8A05
CPU TYPE:MT6223
CPUID :E3790C00
Bootloader download complete.
×Ö¿âID:208848FFFFFFFF20884800000000
Chip Capacity: 0x00800000
Flash write complete.
Flash file C:\Users\Tri Mobile\Desktop\fpt-b188 cpu [6223] flash [numonyx]\FPT-B188 CPU [6223] FLASH [NUMONYX].bin has been written.
Detection initiated, connect the phone and power on it...
Vcc: null
Gnd: 1
Analyzing Rx and Tx...
Some mobile phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...
Failed to detect.
Pinouts are not fonud!
Detection initiated, connect the phone and power on it...
Vcc: null
Gnd: 1
RX: 7, TX: 6
File versiZL75A04_PCB01_GPRS_MT6223P_S00.ZL75A_04A0_V1_ 0_8.BIN
Searching for passwords...
1234[SMS lock]
Found 1 possible passwords.
[Privacy Lock]1234
MTK6250/52 choose Boot V3.1108 or v5.1130 and try it.
Connecting...
Phone hardware version:8A05
CPU TYPE:MT6223
CPUID :E3790C00
Bootloader download complete.
×Ö¿âID:208848FFFFFFFF20884800000000
Chip Capacity: 0x00800000
Flash writing...11%
Failed to write 1A Command !
Error 204
Detection initiated, connect the phone and power on it...
Vcc: null
Gnd: 1
RX: 7, TX: 6
File versiZL75A04_PCB01_GPRS_MT6223P_S00.ZL75A_04A0_V1_ 0_8.BIN
Searching for passwords...
1234[SMS lock]
Found 1 possible passwords.
[Privacy Lock]1234
MTK6250/52 choose Boot V3.1108 or v5.1130 and try it.
Connecting...
Phone hardware version:8A05
CPU TYPE:MT6223
CPUID :E3790C00
Bootloader download complete.
×Ö¿âID:208848FFFFFFFF20884800000000
Chip Capacity: 0x00800000
Flash write complete.
Flash file C:\Users\Tri Mobile\Downloads\b188 no lock\b188 no lock.bin has been written.
Detection initiated, connect the phone and power on it...
Vcc: null
Gnd: 1
RX: 7, TX: 6
>>Waiting for phone's response, press and hold power on/off >>>>>>Waiting for phone's response, press and hold power on/off >>Waiting for phone's response, press and hold power on/off >>>>>>Waiting for phone's response, press and hold power on/off Waiting for phone's response, press and hold power on/off button...
Connecting...
Phone hardware version:8A05
CPU TYPE:MT6223
CPUID :E3790C00
Bootloader download complete.
×Ö¿âID:208848FFFFFFFF20884800000000
Chip Capacity: 0x00800000
Format Address:0-800000
Format length:800000
>>Flash formatting complete!
