1202 Xin Giúp

Các bác xem hộ em với. Xin cảm ơn.


MXKEY Serial: [FT SCR2000 0] - C0841030
Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Driver: UFS2XX, ver: 3.8.14.0 , NTMP ver: 2.8.14.0
Module ver: 1.0.0.17602(14-06-2011), Library ver: 1.0.0.12920(08-10-2011)
ASIC ID: 0x2293 [UPPCosto ver: 2.0]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 8828 [ST 58WR032FU,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
Algorithm: u3_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C30
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00C3002B:DA3BDA66
ASIC type: 11
UEM Imei: Empty
Flash Imei: 35520203576651
RPL saved to "C:\mobileEx\3.5\data\backup\RPL\_BACK.rpl"
Processing MCU file: rh112_004.030
[DCT4,DCT4 ALGORITHM] size: 2.29 MB
Supported Ids: 2293
ASIC ID: 0x2293 [UPPCosto ver: 2.0]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 8828 [ST 58WR032FU,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
Algorithm: u3_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C30
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00C3002B:2984DA60
Area [01000000-0100FFFF] erased in 1.343 s
Area [01010000-013AFFFF] erased in 1 min 16.985 s
Area [013B0000-013EFFFF] erased in 5.907 s
Area [017C0000-017EFFFF] erased in 0.516 s
Area [01FC0000-01FEFFFF] erased in 0.531 s
Flash programming ...
Error while programming [14] at 0x01000000, Result: 0872
flashing terminated !
Task failed at (08000025)!!!
Last RX buffer: 08 72

cho thêm thông tin đi bạn. máy bị thế nào?
theo log thì bạn đưa qua HWK chạy thử, MX chuyên lổi kiểu này.

bạn check thủ lại xem lau chùi kỉ chân chạy trương trình đi

máy rơi mất nguồn, thay upp thỉ bị thế này. Còn đây lả log của HWK :

1st Boot: Ok, DCT4, UPP: 2293 [Rh-112] [2.2.0.1]
2nd Boot: u3_2nd.fia, Ver: 4.79.0
Fl0: 0x01000000-0x013FFFFF,00208828,St M58MR032
Algorithm: u3_st_i.fia, Ver: 4.79.0
Algorithm Ok, MSID: 840EDA578F7BFFF5C2B7AAC6BA
Decoded MSID: 3E4EBAE9-00C3002B-A9000000
Encoded FAID: 9FADEA70-7BDD8E0E-FBDC7236
IMAGE: rh112_004.030
Area1: 0x01000000-0x0100FFFF Erased, Time: 00:01
Area2: 0x01010000-0x013AFFFF Erased, Time: 01:23
Area3: 0x013B0000-0x013EFFFF Erased, Time: 00:07
Area4: 0x017C0000-0x017EFFFF Out of Chip Bounds
Area5: 0x01FC0000-0x01FEFFFF Out of Chip Bounds
Write Error: hDat 14, at: 0x01000000:08
Process Failed, Repowering Mobile

Đã thay lại cpu 1200 ok rui. Thanks các bác
đóng top.!