[Xin giúp] 1202 Xin Giúp

[luongno]

Các bác xem hộ em với. Xin cảm ơn.


MXKEY Serial: [FT SCR2000 0] - C0841030
Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Driver: UFS2XX, ver: 3.8.14.0 , NTMP ver: 2.8.14.0
Module ver: 1.0.0.17602(14-06-2011), Library ver: 1.0.0.12920(08-10-2011)
ASIC ID: 0x2293 [UPPCosto ver: 2.0]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 8828 [ST 58WR032FU,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
Algorithm: u3_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C30
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00C3002BA3BDA66
ASIC type: 11
UEM Imei: Empty
Flash Imei: 35520203576651
RPL saved to "C:\mobileEx\3.5\data\backup\RPL\_BACK.rpl"
Processing MCU file: rh112_004.030
[DCT4,DCT4 ALGORITHM] size: 2.29 MB
Supported Ids: 2293
ASIC ID: 0x2293 [UPPCosto ver: 2.0]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 8828 [ST 58WR032FU,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
Algorithm: u3_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C30
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00C3002B:2984DA60
Area [01000000-0100FFFF] erased in 1.343 s
Area [01010000-013AFFFF] erased in 1 min 16.985 s
Area [013B0000-013EFFFF] erased in 5.907 s
Area [017C0000-017EFFFF] erased in 0.516 s
Area [01FC0000-01FEFFFF] erased in 0.531 s
Flash programming ...
Error while programming [14] at 0x01000000, Result: 0872
flashing terminated !
Task failed at (08000025)!!!
Last RX buffer: 08 72

[nhanvnn]

cho thêm thông tin đi bạn. máy bị thế nào?
theo log thì bạn đưa qua HWK chạy thử, MX chuyên lổi kiểu này.

[dainghia132]

bạn check thủ lại xem lau chùi kỉ chân chạy trương trình đi

[luongno]

máy rơi mất nguồn, thay upp thỉ bị thế này. Còn đây lả log của HWK :

1st Boot: Ok, DCT4, UPP: 2293 [Rh-112] [2.2.0.1]
2nd Boot: u3_2nd.fia, Ver: 4.79.0
Fl0: 0x01000000-0x013FFFFF,00208828,St M58MR032
Algorithm: u3_st_i.fia, Ver: 4.79.0
Algorithm Ok, MSID: 840EDA578F7BFFF5C2B7AAC6BA
Decoded MSID: 3E4EBAE9-00C3002B-A9000000
Encoded FAID: 9FADEA70-7BDD8E0E-FBDC7236
IMAGE: rh112_004.030
Area1: 0x01000000-0x0100FFFF Erased, Time: 00:01
Area2: 0x01010000-0x013AFFFF Erased, Time: 01:23
Area3: 0x013B0000-0x013EFFFF Erased, Time: 00:07
Area4: 0x017C0000-0x017EFFFF Out of Chip Bounds
Area5: 0x01FC0000-0x01FEFFFF Out of Chip Bounds
Write Error: hDat 14, at: 0x01000000:08
Process Failed, Repowering Mobile

[luongno]

Đã thay lại cpu 1200 ok rui. Thanks các bác
đóng top.!