Nokia 105 lắp sim tắt nguồn, tự khởi động lại.
Nếu Anh em gặp trường hợp máy 105 lắp sim bị tắt nguồn, tự khởi động lại thì Falsh lại cho máy.
Chỉ cần Falsh 1 file MCU.RM-908-105_ver 3.10_Flash ok_ Không có Tiếng Việt - Tải về - 4shared _Lưu ý: Chỉ Flash 1 file MCU.
Nếu nạp cả 3 file trong bộ file này sẽ không có Tiếng Việt.
Còn nếu Flash file cao hơn 3.10 lên nguồn tối màn hình, chỉ sáng đèn bàn phím.
Trích:
Code:
VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done
Booting Phone...
CPU ID Response: A200341100
CPU Type: XG110 2.1B
Phone Booted at after First attempt...
******************************************************
TIME STARTS HERE
******************************************************
Sending PBL 19456 bytes...
PBL Successfully Sent...
Sending SBL 65024 bytes...
SBL Successfully Sent...
Flash Chip Manufacturer ID: 0x00EF
Flash Chip Type: 64 Mbit (4Mb x 16) NOR
Extended Information: Multi-Bank / 1.8v
Processing Image File: C:\Documents and Settings\Thien Uy\Desktop\rm908_003.100
Checking Flash Image...
Number of Sections: 03
IMAGE Certificate Block Sent Successfully...
Processing Section 01 of 03
IMAGE Erase Block: 0x00800000~0x00A0FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 2162688 bytes
Data Checksum: 0551
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
Processing Section 02 of 03
IMAGE Erase Block: 0x00C60000~0x00E8123E
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 2232896 bytes
Data Checksum: 89F6
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
Processing Section 03 of 03
IMAGE Erase Block: 0x00FFC000~0x00FFC03E
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 64 bytes
Data Checksum: 0000
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...
Exit Flash Mode Done...
Time Elapse : 00:01:16
******************************************************
You must Factory Reset the phone to enable the
ringtones and other customized settings to work
******************************************************
Waiting For Phone to go Online...
5, 4, 3, 2, 1...
MCU: V 03.10 29-05-13 RM-908 (c) Nokia
IMEI: 358146052403341
Product Serial Number: 007D2BFAU
Product Code : 059R488
Module Code : 0205453
Basic Production Code: 059Q858
PPM SW Version : V 02.70 22-02-13 RM-908 (c) Nokia MR
ADSP Version : p V 02.70\n22-02-13\nRM-908\n(c) NMP\nmr
MCU SW Version : V 03.10 29-05-13 RM-908 (c) Nokia
HW Version : 3000
UEM Version : 1328
UPP Version : 8850
LCD Version : CMI:BEIHAIv01 ILI9163C
********** SIMLOCK INFO **********
CONFIG_DATA : 0010100000000000
PROFILE_BITS : 0000000000040002
ASIC : 11
PROVIDER : Default Test Operator
Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST : PASSED
FACTORY SET TO : Full Factory Set
OK
FACTORY SET TO : User Data
OK
FACTORY SET TO : Leave Factory
OK
FACTORY SET TO : Service Center
OK
FACTORY SET TO : Software Upgrade
OK
FACTORY SET TO : Production Tune
OK
https://fbcdn-sphotos-d-a.akamaihd.n...52568713_n.jpg
