[Chia sẻ] Nokia 105 lắp sim tắt nguồn, tự khởi động lại.

[THIÊN UY™]

Nếu Anh em gặp trường hợp máy 105 lắp sim bị tắt nguồn, tự khởi động lại thì Falsh lại cho máy.

Chỉ cần Falsh 1 file MCU.RM-908-105_ver 3.10_Flash ok_ Không có Tiếng Việt - Tải về - 4shared _Lưu ý: Chỉ Flash 1 file MCU.

Nếu nạp cả 3 file trong bộ file này sẽ không có Tiếng Việt.
Còn nếu Flash file cao hơn 3.10 lên nguồn tối màn hình, chỉ sáng đèn bàn phím.

VBATT Powering Down <<<<
VBATT Powering Up   >>>>
SET VCCIO Level Done
SET BSI Load Done

Booting Phone...
CPU ID Response: A200341100
CPU Type: XG110 2.1B
Phone Booted at after First attempt...

******************************************************
                  TIME STARTS HERE                      
******************************************************


Sending PBL 19456 bytes...
PBL Successfully Sent...

Sending SBL 65024 bytes...
SBL Successfully Sent...
Flash Chip Manufacturer ID: 0x00EF
Flash Chip Type: 64 Mbit (4Mb x 16) NOR
Extended Information: Multi-Bank / 1.8v

Processing Image File: C:\Documents and Settings\Thien Uy\Desktop\rm908_003.100

 Checking Flash Image...
Number of Sections: 03
IMAGE Certificate Block Sent Successfully...
 Processing Section 01 of 03
IMAGE Erase Block: 0x00800000~0x00A0FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 2162688 bytes
Data Checksum: 0551
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
 Processing Section 02 of 03
IMAGE Erase Block: 0x00C60000~0x00E8123E
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 2232896 bytes
Data Checksum: 89F6
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
 Processing Section 03 of 03
IMAGE Erase Block: 0x00FFC000~0x00FFC03E
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 64 bytes
Data Checksum: 0000
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...


Exit Flash Mode Done...
Time Elapse : 00:01:16

******************************************************
    You must Factory Reset the phone to enable the     
   ringtones and other  customized settings to work    
******************************************************


 Waiting For Phone to go Online...

 5,  4,  3,  2,  1...
MCU: V 03.10 29-05-13 RM-908 (c) Nokia
IMEI: 358146052403341 
Product Serial Number: 007D2BFAU
Product Code         : 059R488
Module Code          : 0205453
Basic Production Code: 059Q858
PPM SW Version       : V 02.70 22-02-13 RM-908 (c) Nokia MR
ADSP Version         : p V 02.70\n22-02-13\nRM-908\n(c) NMP\nmr
MCU SW Version       : V 03.10 29-05-13 RM-908 (c) Nokia
HW Version           : 3000
UEM Version          : 1328
UPP Version          : 8850
LCD Version          : CMI:BEIHAIv01 ILI9163C
  ********** SIMLOCK INFO  ********** 
CONFIG_DATA  : 0010100000000000
PROFILE_BITS : 0000000000040002
ASIC         : 11
PROVIDER     : Default Test Operator

   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST               : PASSED

FACTORY SET TO : Full Factory Set
 OK
FACTORY SET TO : User Data
 OK
FACTORY SET TO : Leave Factory
 OK
FACTORY SET TO : Service Center
 OK
FACTORY SET TO : Software Upgrade
 OK
FACTORY SET TO : Production Tune
 OK