Bản in
Link hướng dẫn và CT đây: http://support.sarunasoftware.com/start/Manual.pdf
Khi Download các bạn nên chọn Open, thì uTorrent tự chạy và lưu file đúng định dạng cho bạn. Nếu chọn Save nó chỉ lưu file link dạng uTorrent, bạn chỉ mở được bằng CT uTorrent(khi mở file thì uTorrent tự kết nối đến support để Download file bạn muốn tải về).
HWK Release 14/09/2008 - Discussion
Release Date: 14/09/2008
The Official release is ready in our download area http://sarunasoftware.com.
Please follow the instructions careful on the above page.
The Update Client is launched after HWK Support Suite install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
UFS_DCTxBB5 v2.0.8.0
----------------------
1. New BB5 products:
RM-207,RM-235,RM-236,RM-257,RM-270,RM-277,RM-325,RM-328,RM-342,
RM-343,RM-345,RM-346,RM-352,RM-354,RM-355,RM-357,RM-358,RM-359,
RM-367,RM-378,RM-379,RM-386,RM-387,RM-396,RM-397,RM-400,RM-407,
RM-408,RM-409,RM-410,RM-411,RM-414,RM-416,RM-417,RM-418,RM-419,
RM-420,RM-422,RM-425,RM-436,RM-462
(6263,N78-1,N78-5,3555b,3555,3555c,6600f-1c6220c-1,N78-3,E66-1,E66-2,
E71-1,3600s,7610s,7610sb,E71-2,5610d-2,5610d-2b,6210s-1,7310cb,7310c,
6210s-5,6220c-5,6212c,6500c-5,6650d-1c,E71-3,6210s-1c,5320d-1,5220b,
5220,6600s-1c,5320,5320d-1b,5320,6210s-1b,E66-3,6124c-1,6122c,7210c,E71-5)
2. New DCT4 products:
RH-116,RH-117,RH-118,RM-391,RM-392,RM-393,RM-394,RM-395
(7070,7070b,1681c,2760h,2680s,2680s-2b,1680c-2,1680c-2b)
3. New DCT4+ UNL versions support:
1200 (RH-99 v5.51,v5.53), 1200b (RH-100 v5.32)
1208 (RH-105 v5.51,v5.53), 1208b (RH-106 v4.00,v4.11,v5.23,v5.32)
1650 (RM-305 v5.32,v5.51,v5.53)
1680c-2,1680c-2b (RM-394,RM-395 v5.61,v5.63)
2610,2610b (RH-86,RH-87 v6.73,v7.10)
2630 (RM-298 v5.61)
2760 (RM-258 v4.20,v5.61), 2760b (RM-259 v4.20,v5.61)
2760h (RM-391 v5.45)
4. Fixed minor bugs.
5. New Flash Update Pack 8.36.2.35145
Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.
LG_GSM V 2.0.8.0
-----------------
v 2.0.8.0 (HWK Required)
-------
1. Added "FSct0" (Force Sector 0 Overwrite) Checkbox in
Infineon platform.
Use it for Frozen or blinking phones (KE800,..)
2. KP130, KP210, KP215, KP260, KP265 support added.
SAMs V 2.0.8.0
---------------
TRIDENT
S730i (DUNL,IM,FL)added.
B200,B300 DUNL and IM fixed.
Reserved Regions values revised and fixed.
MSL Repair enhanced, and added for following products:
C17x,C26x,C520,E84x,E90x,E95x,F21x,M300,M60x,P520, U10x,U30x,X82x
"Erase NOR" activated.
Enhanced 4CC protocol handler (fixed error on PC busy)
TRIDENT VISION
E21x,J60x fixed (INF,DUNL,IM)
M310 added (FL,CUNL)
Enhanced 4CC protocol handler (fixed error on PC busy)
OM(SYSOL)
A117,C288,M130L added (DUNL,IM,FL,SECT)
E746 bug fixed.
SWIFT
D780,D788(Duos2),D828E,E251,E251C,E258D,F110,G808E ,J210,L310,
P180,P200,P260,P850,P858,T309,T509,U908E,X700N (DUNL,FL,SECT)
F488E,J150 (FL,CUNL) Use 'Unlock E2P' to see Codes.
E35x,E37x,T809 DUNL, SECT and IM fixed.
E480,E488 bug in DUNL,SECT fixed.
D880-Duos flashing bug in 2.0.7.2 fixed.
X700 SECT fixed.
SWIFT-AEROFONE
B130 introduced(FL,CUNL) Use 'Unlock E2P' to see Codes.
QUALCOMM
A411,A412,A701,A706,A707,A711,A717,A727,A736,A737, A801,A817,
F330,F338,F400,F408,F480,F488,F490,F510,F550,F700, G400,G800,
G800B,G800L,G808,J200,J200L,J208,J630,J638,L170,L7 60,L760G,
L768,L810,L811,P910,P920,P940,P950,P960,T639,T819, U700,U700B,
U708,U800,U800F,U900,U900U,U908,V705,V706,V707,V70 8,Z150,Z170,
Z230,Z238,Z240,Z240E,Z248,Z310,Z360,Z368,Z400,Z540 ,Z548,Z560,
Z570,Z720,Z728,Z740,ZV40,ZV50,ZV60 introduced (FL,INF,REUL)
COMMON
Product Langpacks description added (Info and MCU-Open)
Note, real menu languages can differ from listed here,
for different models, firmware versions. Languages in
brackets is not mandatory for current Region.
SeDBx v2.0.8.0
---------------
DB2010
1. Added Support for: 36Brown, 49Brown
DB2012
1. Added Support for: 50Brown, 51Brown, 51Red, 53Red.
2. Added CID Upgrade.
DB2020
1. Added Support for: 49Brown.
2. Loaders Updated.
PNX5230
1. Added Support for: 49Brown, 52Brown.
2. Loaders Updated.
USB Drivers are installed to X:\Program Files\SarasSoft\UFS\UFS_DBX\USBFlashDriver
SeDBx Quick Guide has been updated.
Many thanks to all those who have supported us!!!
Hôm qua vào SP nó báo là bạn không dùng phiên bản mới nhất của HWk. chưa kịp hiểu sao thì đọc được bài này .
Thanks so much !
support QUALCOMM nhìn ghê quá
Chắc nó sắp support unlock QUALCOMM luôn
. Uninstall old software, first HWK Suite Setup and then second HWK Support Suite..
2. Download and install HWK Support Suite. You can download the latest version from here:
HWK_Support_Suite_Setup_v02.08.000.exe
3. Run Update Client. (If you have more than one HWK and want to use it on the same PC, you need to run the Update Client for that HWK also)
4. After successful update, press the support button in the Update Client.
5. Download HWK Suite Setup from HWK_SW and Install.
If you will ever need to login support area again, just press the support button located in the HWK modules
e đã update HWK rồi mà sao e vào support down file HWK suite setup ve k dc vậy các pác. Bác nào có cho e xin hwk suite setup với. thanks
Làm cách này rất đơn giản
1.Remove suit 2.07.2
2.Remove support suit
3. Install HWK_Support Suite Setup_v02.08.000 vào rối update HWK
4.Sau đó Install bản HWK_Setup_Suite_v02.08.000 vào là ok
Để download file từ support HWK về . thì máy tính bạn cần fải cài fần mềm duyệt wed (Mozilla Firefox) và fần mềm hổ trợ download dành cho support HWK là (uTorrent) mới có thể lấy file từ support của HWK về đc .Trích:
Được post bởi timobile
Mozilla Firefox setup ver mới nhất Download ở Link đây : http://kyoto-mz-dl.sinet.ad.jp/pub/m...up%203.0.1.exe
uTorrent setup download ở link đây : http://support.sarunasoftware.com/start/uTorrent.msi
sau khi setup hết các fần mềm trên bạn bấm vào link này : http://sarunasoftware.com/system/sof...v02.08.000.exe để load support update chíp HWK
Bước 1 : gở bỏ bản HWK_setup_Suite và HWK_support củ bạn đang sài
Bước 2 : cài đặt HWK_Support_Suite_Setup_v02.08.000.exe và update chíp HWK của bạn .
Bước 3 : sau khi update chíp hwk của bạn thành công, thì vào support HWK download HWK_setup_Suite_V2.08.000.exe về và cài đặt lên bình thường .và sau đó thưởng thức với giao diện mới của Sarassoft và + thêm nhìu model mới support. fải nói là wá tuyệt vời
Chúc bạn cài đặt và update V2.08 Thành công !:)
Lâu lâu mới thấy HWK support
ko s/p chắc user chuyển qua box khác :)