HWK new update !!

01-05-2007
New Release
Release Date: 30/04/2007

The Official release is ready in our download area.

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

NOTE: IF YOU HAVE UPGRADED YOUR UFS + HWK SUCESSFUL WITH SUITE V3.0.4 - V3.0.4.2, THERE IS NO NEED TO USE THE CLIENT AGAIN IN THIS VERSION


DCTxBB5 v2.0.5.0
-----------------
1. New BB5 products: RM-101,RM-188,RM-208,RM-260 (N92-2,6086,E65-1,6086b)
2. New DCT4 products: RH-94,RH-95,RH-97,RH-98,RM-225.RM-229
(1112,1112i,6060v,6061,6030b,6030)
3. New CDMA products: RH-71,RH-77,RH-89,RM-121(2125,2126i,2118,2115i,2355)
4. New CDMA TIKU products:
RM-41,RM59,RM-60,RM61,RM-66,RM-124,RM-125,RM-154,RM-193
(3155,3155i,6155,6235,6236i,3152,6265,6265i,2855,6 165,6275,2865)
5. Support of new Flash update pack 7.4.13.26017, new Flash chips added.
6. Improved F-Bus polling, fixed "Bad Resp UFSx" after fatal error.
7. Improved diagnostics of "Dead APE" and not recognized Flash chips.
8. Fixed "Patch" option bug.
9. UDA(CP) flashing for RM84,RM99 (N70-1,N70-5)
10.Self Tests monitor introduced.
11.Unlock of DCT4+ (BB4.1 ASIC 2 & 11) phones.
12.Certificates backup for BB5 phones introduced ("Rd Cert"and"Bk.308"for SL_Data)
13.BB5 File System Format introduced.
14.Windows Vista(tm) 32bit OS support.


LG_GSM v2.0.5.0
----------------
1. KG110, KG320 support fixed.
2. Added new models.
3. Windows Vista(tm) 32bit OS support.


SAMs v2.0.5.0
--------------
COMMON
Windows Vista(tm) 32bit OS support.
Cut Power option (Restart - power on mobile)
TRIDENT
C140,C216,C240,C250,C260,C266,C268,C308,P310,P318, X166,X636 added.
MSL1 bypass, allows direct unlock.
OM635x
E635 added.
SWIFT
E256,E376,E480,E488,E736,E750,E758 added.
E25x direct unlock.
Full TFS Read, TFS editor.
Option to exclude E2P part from MCU read.

All other modules have been updated to include Windows Vista(tm) 32bit OS support
-----------

B.R.

Release Date: 23/05/2007

The Official release is in our download area www.ufsxhwk.com.


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

NOTE: IF YOU HAVE UPGRADED YOUR UFS + HWK SUCESSFUL WITH SUITE V3.0.4 - V3.0.4.2, THERE IS NO NEED TO USE THE CLIENT AGAIN IN THIS VERSION


DCTxBB5 v2.0.5.3
---------------------
1. Modified BB5 codes enter, to allow unlock "Counter Expired".


Many thanks to all those who have supported us!!!

thanks admin

Release Date: 29/05/2007

The Official release will be ready in our download area www.ufsxhwk.com.
You can download from here, until the support site can be updated:-


http://rapidshare.com/files/34039781...5.004.exe.html


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

NOTE: IF YOU HAVE UPGRADED YOUR UFS + HWK SUCESSFUL WITH SUITE V3.0.4 - V3.0.4.2, THERE IS NO NEED TO USE THE CLIENT AGAIN IN THIS VERSION


SAMs V 2.0.5.4
---------------
TRIDENT
U600,U608 added.
"Test Mode" enter improved.
Warning about Battery usage, during UI operations.
Corrected Reserved Regions for some models(D83x,D84x,E90x,P31x,X82x)
Added MSL calculation, allows direct unlock and show correct
codes for new models(D83x,E570,E90x,P31x,U60x,X5xx,X63x,X68x,X8x x,.)
IMEI challenger implemented, allows rebuild IMEI for new models.

anh Hoàng Thông ơi? sao e cài bản V 2.0.5...nào vô cũng không được vậy?em mới click vô bản cài là nó báo lỗi rồi sụp win luôn hà,em đã remove hết bản cũ+driver rồi mới cài.cứu em với?thank anh nhiều

Trích:

---

Được post bởi tunglep

anh Hoàng Thông ơi? sao e cài bản V 2.0.5...nào vô cũng không được vậy?em mới click vô bản cài là nó báo lỗi rồi sụp win luôn hà,em đã remove hết bản cũ+driver rồi mới cài.cứu em với?thank anh nhiều

---

dzui quá ! :D:D vấn đề nói nhiều rồi, nếu không sẳn các thứ để FIX thì cứ việc setup WIN lại rồi chạy vô tư.

Bạn thử làm theo cách này xem nhé
Chuột phải vào các file Setup này - Properties-Compabitility-Trong mục Compatibility Mode trỏ vào mũi tên chọn Windows NT4.0 - OK
Xong giờ bạn thử cài xem có được ko . Chúc thành công

Bạn thử làm theo cách này xem nhé
Chuột phải vào các file Setup này - Properties-Compabitility-Trong mục Compatibility Mode trỏ vào mũi tên chọn Windows NT4.0 - OK
Xong giờ bạn thử cài xem có được ko . Chúc thành công

phải có n page mới dám thử ke ke

Trích:

---

Được post bởi Hoang Thong Mobile

Release Date: 29/05/2007

The Official release will be ready in our download area www.ufsxhwk.com.
You can download from here, until the support site can be updated:-


http://rapidshare.com/files/34039781...5.004.exe.html


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

NOTE: IF YOU HAVE UPGRADED YOUR UFS + HWK SUCESSFUL WITH SUITE V3.0.4 - V3.0.4.2, THERE IS NO NEED TO USE THE CLIENT AGAIN IN THIS VERSION


SAMs V 2.0.5.4
---------------
TRIDENT
U600,U608 added.
"Test Mode" enter improved.
Warning about Battery usage, during UI operations.
Corrected Reserved Regions for some models(D83x,D84x,E90x,P31x,X82x)
Added MSL calculation, allows direct unlock and show correct
codes for new models(D83x,E570,E90x,P31x,U60x,X5xx,X63x,X68x,X8x x,.)
IMEI challenger implemented, allows rebuild IMEI for new models.

---

cám ơn bác xuân nhé
:D chì có HWK zin mới được nhé các bạn!! chú ý nếu chíp HWK lô là ngũ luôn đó

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

NOTE: IF YOU HAVE UPGRADED YOUR UFS + HWK SUCESSFUL WITH SUITE V3.0.4 - V3.0.4.2, THERE IS NO NEED TO USE THE CLIENT AGAIN IN THIS VERSION


LG_GSM V 2.0.5.5
-----------------
1. Fixed support of Spansion MirrorBit Flash chips.
2. Infineon SuperGold2 models added (KE850,KE970, ...)
3. Infineon EgoldVoice models added (KG270,KG271,...)
Warning Infineon models works with battery only !
4. Mediatek models added (C2500, C2600, ...)


SAMs V 2.0.5.5
---------------
TRIDENT
E840,F300,F308,U100,U108 added.
Full Reset(*2767*3855#)is mandatory after flashing !
If make Asia<>EU change, use *2767*3855# before flashing.
SWIFT
D900i,D908i,E200,E208,E390,E398,E590,E740,E830,E83 8 added.

Update HWK 18/8/2007
HWK Release 18/08/2007
Release Date: 18/08/2007

The Official release will be ready in our download area www.ufsxhwk.com.
You can download from here, until the support site can be updated:-


http://rs176.rapidshare.com/files/49...v02.05.006.exe


WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

NOTE: IF YOU HAVE UPGRADED YOUR UFS + HWK SUCESSFUL WITH SUITE V3.0.4 - V3.0.4.2, THERE IS NO NEED TO USE THE CLIENT AGAIN IN THIS VERSION


New Support Area Access - All you need is an Original HWK who's HID is in the master database (can be updated with update client), no username, no password, no waiting for activation. - We hope you will all enjoy this small gift and it will make ours and our customers lifes easier


LG_GSM V 2.0.5.6
-----------------
1. API Updated to allow support access (No user update)


SAMs V 2.0.5.6
---------------
1. API Updated to allow support access (No user update)


SeDBx V 1.0.5.6
---------------
1. Initial Public Release - This module will be updated over the next few weeks to become inline with the rest of the HWK Suite of Modules.


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk
www.gsm-solutions.co.uk

Release Date: 13/09/2007

http://rapidshare.com/files/55317801...5.007.exe.html



This release contains a new update client which resolves the cannot open URL message, some users have had over the last few days.

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

NOTE: IF YOU HAVE UPGRADED YOUR UFS + HWK SUCESSFUL WITH SUITE V3.0.4 - V3.0.4.2, THERE IS NO NEED TO USE THE CLIENT AGAIN IN THIS VERSION


LG_GSM V 2.0.5.7
-----------------
1. Infineon SuperGold2 models unlock (KE850,KE970, ...)
2. KE970GO added (KE970G)


SAMs V 2.0.5.7
---------------
TRIDENT
C520,M300,M600,X526 added.


SeDBx V 1.0.5.7
---------------
1. DB2020 User Lock code reset to 0000.
2. GDFS Info (Displays User Lock code for non DB2020 models)

bác HOANGTHONGMOBILE ơi cho em hỏi với
em ở Quảng Trị vừa rồi mới gởi bộ UFS-3 ( S/N 53650) vào ct HOÀNG THÔNG sữa và gắn HWK zin vào cách đây khoảng 1 tháng .em vào trang www.gts-box.org vào support đăng ký nhưng không có Activation Code .
Bác cho em hỏi code đó ghi ở đâu vậy ??????

Release Date: 28/10/2007

The Official release is ready in our download area http://sarunasoftware.com/cardmain.php?dir=HWK_SW/.


Please run the upgrade client after you have installed the software, follow the instructions careful.

The Update Client is launched after install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
New Users or users who un-installed the old version, should download and install the HWK Support Suite and run the client, before trying to install the full HWK Suite


UFS_DCTxBB5 v2.0.6
--------------------

1. Dual Line flashing for BB5 introduced (Required UFS firmware V2.8 2007)
2. All avalaible phones supported (including RAPIDO v1.12, v1.13)
3. "Verify" function for BB5 added.
4. Latest Flash Update pack (7.40.35.29728) supported.
5. Support of Muxed Nand.


UFS_LG_GSM v2.0.6
-------------------

1. KG290 support added.
2. "Support" button, to access support site.


UFS_SAMs v2.0.6
-----------------

COMMON
Remade user interface.
"Support" button, to access support site.
TRIDENT
E950,F200,J600,J600E,J608,U300,U308,X830N added.
Read Codes for J600,J600E,J608
SWIFT
E598,E768,G600 added.
Unlock Codes on Info for D820,D900,E250,E740,G600.


UFS_SeDBx v2.0.6
------------------

1. "Skip Info Checking" allows reflash dead phones.
2. "Support" button, to access support site.


Many thanks to all those who have supported us!!!

Install bản mới bị lổi rồi

em cũng cài bản v 2.0.5 nhưng khi connect nó báo như vậy là sao hả anh Thông: UFxBoot V2.2 (c) SarasSoft 2003. Id: 62 CF 1 7
UFS_USB V2.6 (c) SarasSoft 2005. S/n: 106498
HID: 30A8810001270003
HWK: A1.04-PRO1
HWK: NOT AUTHORISED, USE UPDATE TOOL
giúp em với anh Thông ơi

em củng bị như anh vậy nè. connect ko dược
UFxBoot V2.2 (c) SarasSoft 2003. Id: 62 CF 1 7
UFS_USB V2.6 (c) SarasSoft 2005. S/n: 100600
HID: 481BAD380027007B
HWK: A1.04-PRO1
HWK: NOT AUTHORISED, USE UPDATE TOOL

bạy giờ em pó tay rui ........ huhuhuhuhuh
:(:(:(:(:confused::confused::confused::confused:

Cái HWK của các bạn chưa có update. Cácc bạn update lai la ok thôi mà. Bản ver 2.0.6 có 2 bản: 4 M Và 51 M
- Đầu tiên setup bản vẻ 2.0.6 dung luong 4M. Sau đó update ok.
- sau đó setup tiếp bản 51M rồi dùng.

Release Date: 21/03/2008

The Official release is ready in our download area http://sarunasoftware.com.


Please follow the instructions careful on the above page.

The Update Client is launched after HWK Support Suite install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


NOTE: Support Access is via the software modules only, download managers have been disabled.


UFS_DCTxBB5 v2.0.7
--------------------

1. New BB5 products:
RM-179,RM-223,RM-233,RM-244,RM-256,RM-264,RM-269,RM-278,RM-279,
RM-313,RM-314,RM-320,RM-321,RM-322,RM-323,RM-397,RM-421,RM-426
(N81-1,N81-3,8800e-1,E51-1,N81-5,7900d-1,N81-6,6500s-5,5610d-5,N82-1,
N82-2,N95-2 8G,N95-6 8G,6301,6301b,6500c-5,N95-4,E51-2)
2. ISM flashing support for BB5 products.
3. Improved DCT4/WD2 Flash Loaders version display.
4. Fixed BB5 PM file open bug.
5. Improved Extended PHONET messages handling.
6. Store of Ext.VPP setting in INI file.
7. Support of new Flash Chips.
8. Fixed CNT flashing for 7370 and 6151.
9. Flash Update pack (7.46.43.30662) added.


Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone. This has always been the case with 7 pin cables, but from this release 7 pin cables are supported by UFS+HWK.


UFS_LG_GSM v2.0.7
-------------------

1. KG280, KP200, KP202, MG280 support added.


UFS_SAMs v2.0.7
-----------------

TRIDENT
C170,C178,C188,E210,E218,E840B,E848,E870,E878,E888 ,E958,
F210,F218,P520(Armani),M608,T519,T629,U600B,U608B added.
OM(SYSOL)
C160,C160B,C160L,C160M,C166,C168,C180,C450,C458,CC 03,
M110,X540,X550 added.
E2P unlock fixed for E420,E428...
Implemented MSL calculation, allows direct unlock
without E2P corruption and shows correct codes.
Rebuild of corrupted Master Key during wrong unlock.
IMEI rebuild for new models (Sysol3)
SWIFT
D880,D888(Duos),E746,G608,L600,L608,M610,M618 added.
Implemented MSL calculation, allows direct unlock, and
show correct codes, without any data lose or setting to
default values of MSL, BTID, IMEI or Radio settings.
E2P Sections Read/Write introduced (compatible with TAT)
IMEI and BTID rebuild.(Imei option for Swift_1 only now)
Fixed bug of 0 length TFS files flashing (affected:
java appletts in D880, E200, E250, G600, M610 products)
COMMON INFO
E2P(hee)sections R/W allows to transfer calibration data,
radio setttings, etc. from product to product, without
damage to other vital data, unlike E2P or FULL clone.
Or allows to Read-Edit-Write well known values.
Warning,
Access to some sections can be denied by firmware, or
can have different values dependand on firmware version.
In case of protected or none existing section will have
result length of 0 or lose of TAT mode.


Many thanks to all those who have supported us!!!


Odia.
www.sarasbox.co.uk
www.gsm-solutions.co.uk

Link hướng dẫn và CT đây: http://support.sarunasoftware.com/start/Manual.pdf

Khi Download các bạn nên chọn Open, thì uTorrent tự chạy và lưu file đúng định dạng cho bạn. Nếu chọn Save nó chỉ lưu file link dạng uTorrent, bạn chỉ mở được bằng CT uTorrent(khi mở file thì uTorrent tự kết nối đến support để Download file bạn muốn tải về).

HWK Release 14/09/2008 - Discussion
Release Date: 14/09/2008

The Official release is ready in our download area http://sarunasoftware.com.


Please follow the instructions careful on the above page.

The Update Client is launched after HWK Support Suite install, if you cancel without making the update, you can run the Update Client again, by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.


UFS_DCTxBB5 v2.0.8.0
----------------------

1. New BB5 products:
RM-207,RM-235,RM-236,RM-257,RM-270,RM-277,RM-325,RM-328,RM-342,
RM-343,RM-345,RM-346,RM-352,RM-354,RM-355,RM-357,RM-358,RM-359,
RM-367,RM-378,RM-379,RM-386,RM-387,RM-396,RM-397,RM-400,RM-407,
RM-408,RM-409,RM-410,RM-411,RM-414,RM-416,RM-417,RM-418,RM-419,
RM-420,RM-422,RM-425,RM-436,RM-462
(6263,N78-1,N78-5,3555b,3555,3555c,6600f-1c6220c-1,N78-3,E66-1,E66-2,
E71-1,3600s,7610s,7610sb,E71-2,5610d-2,5610d-2b,6210s-1,7310cb,7310c,
6210s-5,6220c-5,6212c,6500c-5,6650d-1c,E71-3,6210s-1c,5320d-1,5220b,
5220,6600s-1c,5320,5320d-1b,5320,6210s-1b,E66-3,6124c-1,6122c,7210c,E71-5)
2. New DCT4 products:
RH-116,RH-117,RH-118,RM-391,RM-392,RM-393,RM-394,RM-395
(7070,7070b,1681c,2760h,2680s,2680s-2b,1680c-2,1680c-2b)
3. New DCT4+ UNL versions support:
1200 (RH-99 v5.51,v5.53), 1200b (RH-100 v5.32)
1208 (RH-105 v5.51,v5.53), 1208b (RH-106 v4.00,v4.11,v5.23,v5.32)
1650 (RM-305 v5.32,v5.51,v5.53)
1680c-2,1680c-2b (RM-394,RM-395 v5.61,v5.63)
2610,2610b (RH-86,RH-87 v6.73,v7.10)
2630 (RM-298 v5.61)
2760 (RM-258 v4.20,v5.61), 2760b (RM-259 v4.20,v5.61)
2760h (RM-391 v5.45)
4. Fixed minor bugs.
5. New Flash Update Pack 8.36.2.35145

Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.


LG_GSM V 2.0.8.0
-----------------

v 2.0.8.0 (HWK Required)
-------
1. Added "FSct0" (Force Sector 0 Overwrite) Checkbox in
Infineon platform.
Use it for Frozen or blinking phones (KE800,..)
2. KP130, KP210, KP215, KP260, KP265 support added.


SAMs V 2.0.8.0
---------------

TRIDENT
S730i (DUNL,IM,FL)added.
B200,B300 DUNL and IM fixed.
Reserved Regions values revised and fixed.
MSL Repair enhanced, and added for following products:
C17x,C26x,C520,E84x,E90x,E95x,F21x,M300,M60x,P520, U10x,U30x,X82x
"Erase NOR" activated.
Enhanced 4CC protocol handler (fixed error on PC busy)
TRIDENT VISION
E21x,J60x fixed (INF,DUNL,IM)
M310 added (FL,CUNL)
Enhanced 4CC protocol handler (fixed error on PC busy)
OM(SYSOL)
A117,C288,M130L added (DUNL,IM,FL,SECT)
E746 bug fixed.
SWIFT
D780,D788(Duos2),D828E,E251,E251C,E258D,F110,G808E ,J210,L310,
P180,P200,P260,P850,P858,T309,T509,U908E,X700N (DUNL,FL,SECT)
F488E,J150 (FL,CUNL) Use 'Unlock E2P' to see Codes.
E35x,E37x,T809 DUNL, SECT and IM fixed.
E480,E488 bug in DUNL,SECT fixed.
D880-Duos flashing bug in 2.0.7.2 fixed.
X700 SECT fixed.
SWIFT-AEROFONE
B130 introduced(FL,CUNL) Use 'Unlock E2P' to see Codes.
QUALCOMM
A411,A412,A701,A706,A707,A711,A717,A727,A736,A737, A801,A817,
F330,F338,F400,F408,F480,F488,F490,F510,F550,F700, G400,G800,
G800B,G800L,G808,J200,J200L,J208,J630,J638,L170,L7 60,L760G,
L768,L810,L811,P910,P920,P940,P950,P960,T639,T819, U700,U700B,
U708,U800,U800F,U900,U900U,U908,V705,V706,V707,V70 8,Z150,Z170,
Z230,Z238,Z240,Z240E,Z248,Z310,Z360,Z368,Z400,Z540 ,Z548,Z560,
Z570,Z720,Z728,Z740,ZV40,ZV50,ZV60 introduced (FL,INF,REUL)
COMMON
Product Langpacks description added (Info and MCU-Open)
Note, real menu languages can differ from listed here,
for different models, firmware versions. Languages in
brackets is not mandatory for current Region.


SeDBx v2.0.8.0
---------------

DB2010
1. Added Support for: 36Brown, 49Brown
DB2012
1. Added Support for: 50Brown, 51Brown, 51Red, 53Red.
2. Added CID Upgrade.
DB2020
1. Added Support for: 49Brown.
2. Loaders Updated.
PNX5230
1. Added Support for: 49Brown, 52Brown.
2. Loaders Updated.

USB Drivers are installed to X:\Program Files\SarasSoft\UFS\UFS_DBX\USBFlashDriver

SeDBx Quick Guide has been updated.


Many thanks to all those who have supported us!!!

Hôm qua vào SP nó báo là bạn không dùng phiên bản mới nhất của HWk. chưa kịp hiểu sao thì đọc được bài này .
Thanks so much !

support QUALCOMM nhìn ghê quá

Chắc nó sắp support unlock QUALCOMM luôn

. Uninstall old software, first HWK Suite Setup and then second HWK Support Suite..

2. Download and install HWK Support Suite. You can download the latest version from here:

HWK_Support_Suite_Setup_v02.08.000.exe

3. Run Update Client. (If you have more than one HWK and want to use it on the same PC, you need to run the Update Client for that HWK also)

4. After successful update, press the support button in the Update Client.

5. Download HWK Suite Setup from HWK_SW and Install.



If you will ever need to login support area again, just press the support button located in the HWK modules

e đã update HWK rồi mà sao e vào support down file HWK suite setup ve k dc vậy các pác. Bác nào có cho e xin hwk suite setup với. thanks

Làm cách này rất đơn giản
1.Remove suit 2.07.2
2.Remove support suit
3. Install HWK_Support Suite Setup_v02.08.000 vào rối update HWK
4.Sau đó Install bản HWK_Setup_Suite_v02.08.000 vào là ok

Trích:

---

Được post bởi timobile

e đã update HWK rồi mà sao e vào support down file HWK suite setup ve k dc vậy các pác. Bác nào có cho e xin hwk suite setup với. thanks

---

Để download file từ support HWK về . thì máy tính bạn cần fải cài fần mềm duyệt wed (Mozilla Firefox) và fần mềm hổ trợ download dành cho support HWK là (uTorrent) mới có thể lấy file từ support của HWK về đc .

Mozilla Firefox setup ver mới nhất Download ở Link đây : http://kyoto-mz-dl.sinet.ad.jp/pub/m...up%203.0.1.exe
uTorrent setup download ở link đây : http://support.sarunasoftware.com/start/uTorrent.msi
sau khi setup hết các fần mềm trên bạn bấm vào link này : http://sarunasoftware.com/system/sof...v02.08.000.exe để load support update chíp HWK

Bước 1 : gở bỏ bản HWK_setup_Suite và HWK_support củ bạn đang sài

Bước 2 : cài đặt HWK_Support_Suite_Setup_v02.08.000.exe và update chíp HWK của bạn .

Bước 3 : sau khi update chíp hwk của bạn thành công, thì vào support HWK download HWK_setup_Suite_V2.08.000.exe về và cài đặt lên bình thường .và sau đó thưởng thức với giao diện mới của Sarassoft và + thêm nhìu model mới support. fải nói là wá tuyệt vời

Chúc bạn cài đặt và update V2.08 Thành công !:)

Lâu lâu mới thấy HWK support
ko s/p chắc user chuyển qua box khác :)

SP đợt này hoành tráng quá

Trích:

---

Được post bởi CHDD HUNG PHONG

Làm cách này rất đơn giản
1.Remove suit 2.07.2
2.Remove support suit
3. Install HWK_Support Suite Setup_v02.08.000 vào rối update HWK
4.Sau đó Install bản HWK_Setup_Suite_v02.08.000 vào là ok

---

em làm giống anh oki, update cũng oki, cài bảng 71M sau đó kết nối nó báo lổi anh ơi. giúp với
http://upnhanh.com/userimages/images...yz1440054.jpeg

Qua đây xem nè http://www.saigonmobile.vn/forum/sho...t=18140&page=2
Tải phần mền này về có hướng dẫn luôn nè cứ làm theo là ok

gở bỏ hết mấy cái bản củ rùi setup lại là oki đó anh

cho em link để download :Install HWK_Support Suite Setup_v02.08.000 và HWK_Setup_Suite_v02.08.000

Cái này lỗi box bạn làm cách này đảm bảo 100% ok

Hi! I just fix same problem with UFS by that way:
Setup HWK_Suite_Setup_v02.07.000 after updating got «Box_Auth_Error: 20»

1. Connect box, run UpdateClient.exe > Update UFS Firmware
open Req.fbi
UpdateClient ask open file –«*box number*.fbi»
Give*.* in next string and select Req.fbi
Got massage
-- UFSx Device: UFS2 SarasSoft, USB S/N: ****
-- Target Id : 62 CF 1 10
-- UFSx Boot : UFxBoot V2.2 (c) SarasSoft 2003.
-- UFSx Firmw.: UFS_USB V2.8 (c) SarasSoft 2007.
-- UFSx S/N :*****
-- Features : 00000001
-- Licence 5 : True
-- UFSx Vendor: TORNADO
-- HWK ID : A1.04-******
-- HWK Status : 1, DL: 0
-- Request file generated: "box number.req"
Save one.
2.Start ufs3tools269b
Open in FBI Calculator "box number.req",calculate "box number.fbi".Save one too.Close ufs3tools269b.
Start UpdateClient.exe > Update UFS Firmware againe.Select "box number.fbi" and start update UFS Firmware.
Now my box is working.

HWK_Setup_Suite_v02.08.000.exe + HWK_Support_Suite_Setup_v02.08.000.exe = 74MB

http://rapidshare.com/files/14534573...v02.08.000.rar

Cảm ơn ae trong 4rum rất nhiều

em update bản v2.0.8.0 báo như thế này là bị gì vậy
Upgrade log:
---------- HWK Update Client v 2.0.8.0 ----------
---------- HWK upgrade started:10/18/2008 6:13:38 AM ----------
-- Target Id : 62 CF 1 10
-- UFSx Boot : UFxBoot V2.2 (c) SarasSoft 2003.
-- UFSx Firmw.: UFS_USB V2.8 (c) SarasSoft 2007.
-- UFSx S/N : 106419
-- Features : 00000001
-- Licence 5 : True
-- UFSx Vendor: N-BOX
-- HWK ID : A1.04-PRO1-8F0118F94160003C
-- HWK Status : 1, DL: 0
----------
Locating HWK Upgrade server...
HWK Upgrade server found!
Preparing connection to server...
Connecting to HWKUpgrade server...
Server connection successfully established.
Authenticating on server...
Authentication stage error: Server reported error:No more upgrade logs. Please contact your reseller.

Trích:

---

Được post bởi ngabatinh

em update bản v2.0.8.0 báo như thế này là bị gì vậy
Upgrade log:
---------- HWK Update Client v 2.0.8.0 ----------
---------- HWK upgrade started:10/18/2008 6:13:38 AM ----------
-- Target Id : 62 CF 1 10
-- UFSx Boot : UFxBoot V2.2 (c) SarasSoft 2003.
-- UFSx Firmw.: UFS_USB V2.8 (c) SarasSoft 2007.
-- UFSx S/N : 106419
-- Features : 00000001
-- Licence 5 : True
-- UFSx Vendor: N-BOX
-- HWK ID : A1.04-PRO1-8F0118F94160003C
-- HWK Status : 1, DL: 0
----------
Locating HWK Upgrade server...
HWK Upgrade server found!
Preparing connection to server...
Connecting to HWKUpgrade server...
Server connection successfully established.
Authenticating on server...
Authentication stage error: Server reported error:No more upgrade logs. Please contact your reseller.

---

Mình cũng bị như bạn , để hôm sau hoặc hôm sau nữa update được mà !