Infinity `SM` software v1.11 released
Service - added Read CRT function for MTK based phones (need Root)
Service - added Bacup SEC function for MTK based phones (need Root)
Installer has two parts:
- InfinityBox_install_SM_v1.11
- InfinityBox_update_SM_ResourcePack_v1.09 (old one). If you have Resource Pack installed earlier you do not need to download and install it again
Download link
Chinese Miracle-2 MTK/Mediatek v2.00 - new CPU support, new features, new options
MTK 6570 CPU support:
with NAND memory
with eMMC memory
Read Info - Complete device info, Security info
Read Firmware - Factory Scatter format [ NAND supported - WorldFirst and unique! ]
Write Firmware - Factory Scatter Format [ NAND supported - WorldFirst and unique! ]
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool
MTK 6750 CPU support:
Read Info - Complete device info, Security info
Read Firmware
Write Firmware
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool
MTK 6755 CPU support:
Read Info - Complete device info, Security info
Read Firmware
Write Firmware
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool
MTK 6757 CPU support:
Read Info - Complete device info, Security info
Read Firmware
Write Firmware
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool
MTK 6763 CPU support:
Read Info - Complete device info, Security info
Read Firmware
Write Firmware
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool
MTK 6797 CPU support:
Read Info - Complete device info, Security info
Read Firmware
Write Firmware
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool
--- Under Test ---
MTK 6758 CPU support:
Read Info - Complete device info, Security info
Read Firmware
Write Firmware
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool
MTK 6739 CPU support:
with NAND memory
with eMMC memory
Read Info - Complete device info, Security info
Read Firmware
Write Firmware
Read NVRAM
Write NVRAM
Repair Security
Formay FS - FRP, Settings, Privacy ( and mixed/special mode )
MemoryTool
Main
- New look and design. All simplified and optimized much, as possible. [ please refer to v2 interface introduction ]
- New core. All code made from scratch.
- New boot chain selection mode - automatic ( via defined user combination ) or manual.
- New connection
- Complete error handling and explanation
- Internal EMIDB cover 99% of existing memory devices on both - NAND and eMMC devices
- Easy end user customization for adding support for new device etc.
Flasher
- Completely new flasher design, which allow customize whole flashing process [ please refer to v2 interface introduction ]
FW Reader
- Completely new core, which allow handle all existing types and flash devices.
Service
- Security repair NOT require reboot to meta, not required CDC drivers or whatever else. All direct.
- Format FS include different mode, optimized for different secure devices type ( with FORMAT, WRITE protection )
- During NVRAM read/write SW also verify it condition and data
MEMORY TOOL activated!
Easy, fast and ultimate solution now come in MTK too!
- Support eMMC and NAND flash IC secure
- Allow READ, WRITE, ERASE partitions
- Show partitions states and info only for eMMC devices
- Allow RE-init PMT ( from scatter )
Other
Lot of other changes from v1 line, which not mandatory to mention
Known issues/warnings/info:
1. [NAND on MT6570] v1712, v1736 loader packages NOT SHOULD BE USED! Since they have ftl/ecc errors!
In result you will give read/write FW errors and rest problems at all.
Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write
2. [NAND on MT6570] In some cases "stuck on logo" devices can be fixed only via FFU (whole flash) format!
1. [NAND on MT6570] UBI SPARSE image flashing may take MUCH time (up to 5 minutes and more) for some devices!
3. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal and cannot be fixed.
Read-write data, which you want, ignore "EMPTY" states.
4. [MEMORY TOOL] Old protocol secure devices (MT6750/MT6755) - LeEco and similar
In some cases WIPE partition may not work!
5. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND/eMMC devices! Result - stuck after system/userdata partition flashing
6. FileSyhstems flashing on some SBC-enabled devices ( except SYSTEM/CACHE/USER ) may fail! Solution - exclude them from flashing list.
7. Device with NV_TYPE2 security may not work yet for repair sec!
Download link
Chinese Miracle-2 MTK/Mediatek v2.00 r2 - MT6739 support, SPUnlock and more
As we told earlier, it was found some kind of problems with v2.00 at some PC and some hardware configuration. Current release should help to fix it. More details please see here - Chinese Miracle-2 MTK/Mediatek v2.00 - new CPU support, new features, new options - GSM-Forum
More details about current release:
- Main
MT6739 CPU supported!
MT6739 moved from TEST to GENERAL support.
Firmwware read
Firmware write
NVRAM read
NVRAM write
Reset Settings / Format FS
Reset FRP
Reset Privacy
MemoryTool
- MemoryTool
Fixed PMT init on some devices
Optimized Expand/Collapse view functions
Fixed DA1804 and DA1712 loaders support for WIPE
Optimized NAND support
- Service
NVRAM module updated
.dynamic page detection
.some types support fixed
.repair security ( security type detection ) updated
FormatFS / Reset settings rebuild
.Activated fully automatic "FULL FACTORY" mode, designed for all modern devices ( include devices with SEC_CONTROL )
."FULL FACTORY" mode set to default
.Some "OLD" agents (DA15xx) may not work
- SP Unlock activated
Support all MTK modern phones, except MT6763 and MT6739.
Read codes and Direct Unlock mode supported
MT6570 eMMC ONLY devices supported
- Core
Fixed memory leak issues and problems with booting on some systems
Optimized different OLD agents support for MODERN devices ( DA16xx and DA17xx line )
SW more faster now
EMI handler for MT6570 and MT6797 fully automated and complete
Improved EMI lookup support for MT675x devices
EMIDB updated
Hint/Error explain module updated
MT6758 support under test
MT6771 support under test
- Flasher
Fixed break issue, when just one file selected for flashing.
HWInfo compatibility status shown in log in both cases ( succes or failed )
- FW reader
MT6739 support
New types of firmwares supported
Optimized NAND reading on DA18xx line loaders
Read Firmware size now shown in log
- New models included
Limited MEIZU support
Limited Oppo support
Limited Gionee support
Limited BQ support
Some basic "generic" secure devices support optimized
Known issues/warnings/info :
1. [NAND on MT6570] v1712,v1736 loader packages NOT SHOULD BE USED! Since they have ftl/ecc errors!
In result you will give read/write FW errors and rest problems at all.
Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write
2. [NAND on MT6570] In some cases "stuck on logo" devices can be fixed only via FFU (whole flash) format!
3. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal and cannot be fixed.
Read-Write data, which you want, ignore "EMPTY" states.
4. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND devices! Result - stuck after system/userdata partition flashing
5. FileSystem flashing on some SBC-enabled devices ( except SYSTEM/CACHE/USER ) may fail! Solution - exclude them from flashing list.
6. Cheap MT6739 devices require BATTERY REMOVING after EVERY operation in most cases!
7. Meizu support is limited by Preloader Level ( No BROM SLA ) - you must UNTICK "PMT Update" and "PRELOADER" partition from flashing list!
Download link
Infinity Chinese Miracle II SCR/SPD-RDA v1.03: New models and features
Supported CPU list:
Spreadtrum: SC6530, SC6531, SC6531(A/C), SC6531E, SC6533, SC6533G
RDA Mirco: RDA8851 rev A,B,C,L,CL
RDA Micro: RDA8826
RDA Mirco RDA8851 rev A,B,C,L,CL/RDA8826
Flashing protocol updated
Updated LOD tools ( flashing / customizing )
Spreadtrum SC6533/G:
Protocol updated
Support for REV2 bootrom mode activated
FW reading revised
Updated LOD tools ( flashing / customizing )
Spreadtrum SC6530/6531/A/C/E:
Revised Repair security feature
Flashing revised
-> Activated "Format FFS" during BINARY dump writing
-> Use that feature, if device not allow make direct format ( some C/E revision devices )
User code read revised - activated 2nd mode : from DUMP
-> Press and hold LEFT SHIFT key, while starting ReadUsercode code operation. Select desired dump file to read code.
Activated AUTO fixer for memory dumps
Internal loaders updated
Spreadtrum other:
Protocol updated
PAC handling revised
Improved Flashing procedure for SC7701/SC7702 devices
Improved Flashing procedure for SC6825/SC8825 devices
Known issues[*]/warnings[!]/info[I]:
1. [I] AUTO fixer for memory dumps
-> That feature will AUTOMATICALLY FIX dumps from devices with "abnormal" flash and memory layout ( issue found on number of devices 16MB flash with 8MB layout )
-> Just select binary dump in flashing tab or any other operation, which require file select.
2. [*] In some cases Format FFS may fail on E and C rev
-> Read Flash Dump, write it back. During Dump writing SW will ask you about FormatFFS.
Download link
Infinity `SM` software v2.00 released
Infinity Samsung Activation server is back with new Smart-Card firmware for latest `SM` software release.
`SM` software v1.xx was released time ago as a free software for Infinity users. From now v2.00 released as a paid addon.
Users who have made free Infinity `SM` activation can use it in future with `SM` software v1.xx. If users of free `SM` Activation want to use `SM` software v2.xx they should obtain new `SM` activation.
Infinity `SM` software v2.00 news:
- many internal stability improvements
- FRP unlock engine re-written
- FRP unlock procedure updated
- security area write for MTK based devices
- security area write for Exynos based devices
- Smart-Card firmware should be updated to use this software release
- "SM ResourcePack" should be installed to get all released functions working
At the moment there is a special offer for `SM` v2.xx Activation. Price is quite cheap right now but with each new `SM` update released price will be higher than before. So you can activate software right now for a cheap price or you can wait some time, see software updates progress and then pay higher price for it.
List of supported models and features for previous software release - Infinity `SM` software - general information, models, functions etc. - GSM-Forum
Test reports are here - Success test reports with Infinity SM software - GSM-Forum
Download link
Infinity `SM` software v2.02 released
Service changes:
- Downgrade modem procedure released. This operation may be dangerus so use at own risk and only if you are really know you need it !
- rebuild Reset FRP procedure
Internal changse:
- a lot of changes related to use server functions
- bug fixes and internal improvements
Download link
Infinity `SM` software v2.00 released
Infinity Samsung Activation server is back with new Smart-Card firmware for latest `SM` software release.
`SM` software v1.xx was released time ago as a free software for Infinity users. From now v2.00 released as a paid addon.
Users who have made free Infinity `SM` activation can use it in future with `SM` software v1.xx. If users of free `SM` Activation want to use `SM` software v2.xx they should obtain new `SM` activation.
Infinity `SM` software v2.00 news:
- many internal stability improvements
- FRP unlock engine re-written
- FRP unlock procedure updated
- security area write for MTK based devices
- security area write for Exynos based devices
- Smart-Card firmware should be updated to use this software release
- "SM ResourcePack" should be installed to get all released functions working
At the moment there is a special offer for `SM` v2.xx Activation. Price is quite cheap right now but with each new `SM` update released price will be higher than before. So you can activate software right now for a cheap price or you can wait some time, see software updates progress and then pay higher price for it.
Latest released version: 2.03
Curent price: 70 Infinity credits
List of supported models and features for previous software release - Infinity `SM` software - general information, models, functions etc. - GSM-Forum
Test reports are here - Success test reports with Infinity SM software - GSM-Forum
Download link
Infinity `SM` software v2.04 released
Flasing - add Reset userlock / pin / pattern / password in FRP ON + OEM ON mode options
Many bug fixed
How to use Reset User lock options:
- see phone version in Recovery menu
- download COMBINATION file according to the phone version
- check checkbox and add your COMBINATION file
- flash phone
- after write COMBINATION file wait phone is turned on
- phone on in recovery mode, reboot phone
- you have access to phone data
after backup user data - reflash phone
Download link
Infinity Chinese Miracle-2 MTK/Mediatek v2.01 - LEGACY support and other features
Important:
- Software installed to new folder /CM2MT2/ and designed to support new models
Legacy core support activated:
MT6571
MT6572
MT6580
MT6582
MT6589
MT6592
MT6595
MT6597
MT6732
MT6735
MT6737
MT6752
MT6753
MT6795
MT8127
MT8163
MT8321
MT8732
MT8735
MT8752
Identify: full device info, security info
Flash Factory Firmware
Read Factory Firmware
Reset Settings / Format FS
Reset FRP
Repair Security (Flash Mode, Direct)
SP unlock
MemoryTool - complete device control, service, repair, forensic etc.
- Main
Loader database optimized, size reduced.
DA v1820 line support tested and activated
DA v1836 line support tested and activated
Connection level revised
BROM level support optimized
Optimized and changed HighSpeed port selection
FlashEngine revised
NVRAM tool revised
Global option PWM - allow switch SW between two different work modes for RAPHAEL.
> Use second one if first mode give errors at writing f.e. restore NVRAM on F5 like device etc.
> For LEGACY phone it used in MEMORY TOOL ( WRITE / WIPE )
- Service
Repair Security revised
> Old LEGACY types require FORMAT FS/FACTORY RESET for accept changes !
Format FS - new mode activated: Forced Erase
Format FS - fixed WIPE mode
- Core
EMIDB updated
New EMI engine for LEGACY line
> EMI engine support almost all existing LEGACY line
> New types for RAPHAEL included
- FW reader
LEGACY core supported ( unsigned and static signed types are supported )
New types of firmwares supported
Scatter creation optimized
- Other
Settings tab activated ( firmware path settings and other features can be found here )
AutoUpdate ( module files ) feature activated
Many other changes and fixes
Known issues/warnings/info:
1. FileSystem flashing on some SBC-enabled RAPHAEL devices (except SYSTEM/CACHE/USER) may fail ! Solution - exclude them from flashing list.
2. Meizu support is limited by Preloader Level ( No BROM SLA ) - you must UNTICK "PMT Update" and "PRELOADER" partition from flashing list !
3. MT6589 supported ONLY up to DAv17xx line, after DAv1728 support has been removed.
4. MT6592 support on DAv18xx loader line broken ( DA issue )
5. EMI/DRAM init module in LEGACY line is almost auto, but in some case require CHANGE EMI setting, if used internal DB ( since much RAMsize/Revision of eMMC/eMCP )
6. MOST of LEGACY phone can be booted via BROM mode from now ( PLAIN, PRL, SBC )
7. NAND support on LEGACY line is not activated yet
Download link
Infinity Chinese Miracle-2 MTK/Mediatek v2.02 - new features, loaders, improvements
- Base
Base - Read info from EMI base (preloader) in manual mode after selection
Base - Info reading improved ( in some cases device info can be empty )
Base - Manual mode selection revised ( Boot fail issues in manual mode )
- MemoryTool
MemTool - Partition types detection improved
MemTool - Interface changes ( partition selection style changed, menu sctructure changed )
MemTool - work with boot1/boot2 section revised for LEGACY line
MemTool - InitPreloader option activated ( LEGACY/RAPHAEL )
MemTool - Flash service regions read/write now allowed ( if they not set as protected - i.e. OTP )
- Flasher
Flasher - Removed "Skip preloader" option, use selection instead ( untick preloader from flashing list )
Flasher - Customization model revised
Flasher - DL Fix / ADL Checksum revised
Flasher - Preloader initialization during flashing revised
Flasher - More accurate PMT/GPT rebuild, for compatibility with SPFT ( PMT invalid issues after servicing with MT2 module )
- Firmware Reader
FWReader - Scatter compatibility for spft optimized (6735, 6737)
FWReader - More types supported for safe read
FWReader - Info reading improved ( in some cases device info can be empty )
FWReader - SW path settings also accepted now on FW read
- Platform changes
Platform - MT6589 support optimized
Platform - MT6592 support optimized
Platform - MT673x support optimized
- Loader database
LoaderDB - New agents included ( BQ, TECNO, INFINIX, VIVO )
- Other
Other - Lot of small fixes and changes, reported by users
Thanks to : gracy_elec, kamal_singla and other our users for providing files and/or testing
Download link
Infinity Samsung `SM` v2.05 released
Service: added new version of Reset FRP procedure (without user-data lost)
How to use: check "new" checkbox and follow instructions
Download link
Infinity `SM` software v2.00 released
Infinity Samsung Activation server is back with new Smart-Card firmware for latest `SM` software release.
`SM` software v1.xx was released time ago as a free software for Infinity users. From now v2.00 released as a paid addon.
Users who have made free Infinity `SM` activation can use it in future with `SM` software v1.xx. If users of free `SM` Activation want to use `SM` software v2.xx they should obtain new `SM` activation.
Infinity `SM` software v2.00 news:
- many internal stability improvements
- FRP unlock engine re-written
- FRP unlock procedure updated
- security area write for MTK based devices
- security area write for Exynos based devices
- Smart-Card firmware should be updated to use this software release
- "SM ResourcePack" should be installed to get all released functions working
At the moment there is a special offer for `SM` v2.xx Activation. Price is quite cheap right now but with each new `SM` update released price will be higher than before. So you can activate software right now for a cheap price or you can wait some time, see software updates progress and then pay higher price for it.
Latest released version: 2.06
Curent price: 85 Infinity credits
List of supported models and features for previous software release - Infinity `SM` software - general information, models, functions etc. - GSM-Forum
Test reports are here - Success test reports with Infinity SM software - GSM-Forum
Download link
Infinity Chinese Miracle-2 MTK/Mediatek v2.04 - New chips support and new features activated
Base:
Base - MT6761 support activated
Base - MT6765 support activated
Base - MT6771 support activated
Base - Secure boot - ARB verification during boot ( via BROM logging )
Base - Secure boot - SLA challenge state verify ( pass-trought file or nonce challenge )
FWFlasher:
FWFlasher - Some ancient secure devices flashing optimized ( early 6572 and similar )
FWFlasher - MT6753/MT6752 flashing revized
FWFlasher - Pre-flash backup option enabled
FWFlasher - Flash core updated
FWReader:
FWReader - More accurate FW verification for signed types ( issues after FOTA "garbaging" )
FWReader - ARB state and version, if present ARB bit
FWReader - AVB state and version, if present AVB secure mechanism
FWReader - FW logging info - if SW show it during load - make sure device contain SAME or LOWER version!
FWReader - More types supported for safe read
FWReader - Info reading improved
Service:
Service - Security repair revised ( NVRAM verify and some "old" types support )
Service - "Repair BaseBand" option activated
Service - Format FS revised
Service - NVRAM module updated
MemoryTool:
MemTool - Improved work with partitions on LEGACY line
MemTool - Wipe operation optimized ( def and adr mode )
Platform:
Platform - MT6761 support activated [ Under test ]
Platform - MT6771 support activated
Platform - MT6765 support activated
Platform - MT6753 support optimized
Platform - MT8172 support optimized
Platform - MT8176 support optimized
Platform - MT8163 support optimized
Platform - MT8127 support optimized
Loaders:
LoaderDB - New agents included ( Moto, Huawei, ZTE, Asus and others )
Other:
Other - Lot of different small changes and fixes
Other - BootHelper updated
Other - ErrorHandling updated - more detailed hints/explanation of troubles during service process
Other - EMI Module updated - MT6765/MT6771/MT8176/MT8172/MT8173/MT6753 supported
Other - Automatic backup during Identify and critical operations ( list can be tuned via edit settings.ini )
Other - Partial LEGACY NAND support ( complete boot/verify ) for testing purposes for now - MT6580, MT81xx series
Other - All settings ( except FLASH tab and Platform Settings group ) now saved/load automatically
Many thanks to: bRkA, gracy_elec and other our users for providing files and/or testing
Download link
Infinity Chinese Miracle-2 MTK/Mediatek v2.05 - New models and features
Base:
Base - Secure boot - ARB verification revised for some secure configs and chips
FWFlasher:
FWFlasher - Flash core updated
FWFlasher - SecureFlash on Legacy phones revised ( SECCFG options and other issues fixed )
FWFlasher - MT6753/MT6752 flashing revised
FWReader:
FWReader - More accurate type detection on LEGACY lines
FWReader - More types supported for safe read
FWReader - Info reading improved
Service:
Service - "SimLock Reset" option activated - used to rollback all LockSettings to default
Service - Format FS revised
Service - Repair BB revised
Service - NVRAM module updated
Platform:
Platform - MT6771 support optimized
Platform - MT6753 support optimized
Platform - MT8127 support optimized
Loaders:
LoaderDB - Lot of new agents included (Alcatel, Moto, Lava and others)
Other:
Other - Many different small changes and fixes
Other - Some kind of GUI changes for better user expirience
Other - ErrorHandling updated - more detailed hints/explanation of troubles during service process
Other - EMI Module updated
Other - Preloader tools, Preloader init and other related stuff updated
Other - Scatter handling optimized for some vendor-specific stuff
Other - Automatic backup revised (manual tuneup fix)
Other - Partial LEGACY NAND support (complete boot/verify) - Identify option works now on some devices
Info:
Info: Alcatel support for NEW line devices restricted by PRELOADER level ONLY! Some partitions are PROTECTED! BROM mode not supported for now ( due remote SLA )
Info: LEGACY secure flashing now pass at any base settings but IN SOME RARE CASES (like Huawei and similar) it may lead to BaseBand and other problems.
Solution - REFLASH using CORRECT DA!
Info: ARB nowdays appearing on more devices, make sure about you FLASH SAME version. (Identify ARB LOG and SW load LOG ) Not upgrade to newer ones, if need make some extend service etc. !
Credits: Many thanks to kamal_singla, gracy_elec and other our users for providing files and/or testing and for other kind help !
Download link
https://www.infinity-box.com/cdn/tg48.png https://www.infinity-box.com/cdn/yt48.png https://www.infinity-box.com/cdn/fb48.png https://www.infinity-box.com/cdn/tw48.png https://www.infinity-box.com/cdn/ios2-48.png
- How to upload files to support
Infinity Chinese Miracle II SCR/SPD-RDA v1.04: New models and features
Supported CPU list:
Spreadtrum : SC6530, SC6531, SC6531(A/C/D)
UniSoc : SC6531E, SC6533, SC6533G
RDA Mirco : RDA8851 rev A,B,C,L,CL
RDA Micro : RDA8826
RDA Mirco RDA8851 rev A,B,C,L,CL
RDA Micro RDA8826
Spreadtrum SC6533/G :
Flashing protocol updated
BOOTROM mode support revised
Updated LOD tools ( flashing / customizing )
Repair security revised (
-> FAC area rebuild
-> 3rd item repair activated
UserCode reading activated
Spreadtrum SC6530/6531/A/C/D/E:
Revised Repair security feature
Flashing revised
-> Secure/Signed lines flashing rebuild
-> Masterimage build revised
-> Whole flash erase fixed for NOR devices
Internal loaders updated
Database revised, loaders re-marked
Spreadtrum other:
Protocol updated, stuck issues during wrong boot selection fixed
Improved Flashing procedure for SC7701/SC7702 devices
Flashing customization module revised
InternalDB/ExternalLoader detetection/selection revised
Download link
Infinity Chinese Miracle-2 MTK/Mediatek v2.06 - AutomaticBoot selection and other stuff
To use this software Smart-Card firmware version should be 0137 or higher.
Base:
Base - Secure boot - Automatic boot selection feature released
Base - Secure boot: Allow automatic detect boot configuration for SECURE enabled chips
Base - Secure boot: Following secure configurations are supported: SBC, SLA, SDA and their combinations
Base - Secure boot: Following secure configurations are NOT supported: ARB and combinations with it
Base - Secure boot: Supported CPU: MT6572, MT6580, MT6582, MT6589, MT6592, MT6735, MT6752, MT6753, MT6755, MT6757, MT6763, MT6771, MT8127, MT8135, MT8167 ( list of tested )
Base - ModelBD - Manual Model DB update feature released
Base - ModelBD: Allow save boot configuration in sw database for future use
Base - ModelBD - Automatic Model DB update feature released
Base - ModelBD: Allow save boot configuration in sw database for future use ( press and hold LCTRL key during press IDENTIFY )
Base - FlashLoader line v1904 tested and supported. Older lines (6592/6595 and similar) still unstable
Base - FlashLoader line v1912 tested and supported. Older lines (6592/6595 and similar) still unstable
FWFlasher:
FWFlasher - Flash core updated
FWFlasher - SecureFlash on Legacy phones revised
FWFlasher - MT6771/6765 support revised
FWReader:
FWReader - More types supported for safe read
FWReader - Info reading improved
FWReader - packing revised
FWReader - more accurate data verification
Service:
Service - Format FS revised
Service - NVRAM module updated
Platform:
Platform - MT6765/MT6762 support optimized
Loaders:
LoaderDB - Lot of new agents included (Tecno, Tesla, Wiko and other)
LoaderDB - Included MT6570 "DRAM Fixed" agents used to revive devices flashed with wrong preloader ( so called "Doogee X10 bug" )
Other:
Other - Many different small changes and fixes
Other - SaveUser Configuration option can be found in FILE system menu. Work only in MANUAL mode !
Other - ErrorHandling updated - more detailed hints/explanation of troubles during service process
Other - Preloader tools, Preloader init and other related stuff updated
Other - Partial LEGACY NAND support - optimized boot. Identify work complete if BMT autoset work correct
Info: Automatic Boot option can be switched off/on in settings menu
Info: Automatic Boot work in "SelfLearning" mode - once learned it will boot this type/device line after automatically
Info: Automatic Boot option support and learn different modes ! Make sure if device used DIFFERENT settings - learn all of them !
Info: MT6570 Fixed NAND DA can be used for flashing FACTORY firmware and INIT PRELOADER. For FW read and all other things - use INFINITY ones !
How to use AutomaticBoot select, User DB, Auto DB
Download link #1
Download link #2
Download link #3
Infinity Chinese Miracle-2 SPD/UniSoc - CM2SP2 - v2.00 r1 released
- Supported platforms:
SpreadTrum:
SC5735
SC7715
SC7731C, SC7731G
SC9820
SC9832A
SC9850
SC9853i
UniSoC:
SC9820E
SC7731E
SC9832E
SC9850K
SC9850KH
SC9863
- Support Generic (Non-Secure), SecureV1, SecureV2 devices
Android 4/5/6/7/8 versions
- Supported operations in initial release:
Identify ( include complete device info )
Reset Settings / Format FS
Reset FRP
Firmware flashing ( Safe Flash, Repartition, HW verify, Flash customizing )
- Database:
Basic wide-range bootloaders for common devices types
Also lot of other pre-defined models already included in database
- Extra:
Feature: Completely safe flash engine ( allow flash SimLock / Signed / and other devices, recover critical data from semi-damaged NV )
Feature: Automatic ModelDB update at new model detection ( loader select, pac load etc. )
Feature: Customized boot option and sources: Manual PAC, Manual FDL pair with automatic details detection, Pre-defined DB, Self-Learning DB
Feature: Complete Firmware Info detection at FW load with extended info
Download link
Infinity Chinese Miracle-2 SPD/UniSoc v2.01 - UniReader Edition - Android 4-5-6-7-8-9
As ordinary, Infintiy Team continue to release unique and world-first software features, algorithms and methods.
- Core
Protocol updated
Alternate protocol support activated ( automatic switch depends on model )
- New Self-Learning engine for semi-supported devices !
In case of problem with device servicing - during identify session SW will make new database record
That record available from boot menu after that to use exactly for this device line
That will fix any incompatibility loader <-> device problems and remove any servicing issues
- Service
Identify - better structure detection, simlock state info
Identify - Userdata state detection optimized
Format FS - Forced Format revised
- Flasher
Optimized PAC handling
Optimized older device line support ( Sc7715-Sc9832 from SPRD )
NVManager updated - Identify, Security swap and verification, Recovery mode
Activated flashing of own FlashFile format files made by FWReader
- Firmware Reader activated!
Allow read ANY security level phone from Spreadtrum or UniSoc on almost all Android OS versions!
Support OLD SPRD line devices:
SC7715, SC7731, SC9820, SC9832, SC9850 and their revisions and modifications
Plain, Signed and RSA-enabled
Android 4, Android 5, Android 6, Android 7 lines are supported (higher versions were NOT released from SPRD)
Support NEW UniSoc line devices:
SC7731E,SC9832E,SC9863,SC9850,SC9820E and their revisions and modifications
Plain, Signed and RSA-enabled
Android 6, Android 7, Android 8, Android 9 lines are supported (lower versions were NOT released from UniSoc)
Arch32/Arch64 support
Support "SPRD"-like chipsets with Intel X86 arch
SC9853I and its modifications and revisions
Plain, Signed and RSA-enabled
Android 6, Android 7, Android 8 lines are supported
It is the only existing and complete solution ;)
Additional info:
Firmware use OWN format.
Firmware is COMPLETE one, allow to fix any sw-related state including FlashChip erase, change or complete SW rebuild
Unlike older SWReader version used in V1 line there is no need in bunch of additional re-connection operations or to make something special.
- Database:
New generic boots included, some boots updated
- Other
Bug fixes and some changes according users requests
- Known issues:
[1] UniSoc line is SLOW. It is VERY SLOW! Unlike SPRD ones, it consume x4-x5-x6 more time comparing to old SPRD.
We made almost all possible for now to speed it up. And that is limit for protocol.
In near time it should be some speed up to 20-30% but this solution still require some more time.
[2] UniSoc devices with ARB active may dead on wrong SW version flashing at Android 9 line.
We checking that issue and collecting samples. According users test and reports solution will follow.
[3] Some old devices after FW flashing may gone to "Encryption Unsuccessfull" state, right now - "ResetPhone" button enough.
[4] Sw will try always, in any case retrieve all device-side keys/security during flashing and identify, if they exists inside.
Much backups better, that nothing. Actual for devices with paired/signed security and/or active keybox.
[5] NAND devices on SC9820,SC7715,SC8830 not supported yet for FW reading
Password for archive file (if any) is: 12345678
Download link #1
Download link #2
Download link #3
Download link #4
Download link #5
Infinity Chinese Miracle II SCR/SPD-RDA v1.05 - New models and features
As ordinary, Infintiy Team continue to release unique and world-first software features, algorithms and methods.
Supported CPU list:
Spreadtrum: SC6530, SC6531, SC6531(A/C/D)
UniSoc: SC6531E, SC6533, SC6533G
RDA Mirco: RDA8851 rev A,B,C,L,CL
RDA Micro: RDA8826
RDA Mirco RDA8851 rev A,B,C,L,CL
RDA Micro RDA8826
Spreadtrum SC6533/G:
Updated LOD tools ( Factory LOD support revised )
UserCode reading improved
Spreadtrum/UniSoc SC6530/6531/A/C/D/E:
New feature activated: Complete identification
During Binary Dump selection SW will extract complete device info ( build version, time, HW details etc. )
During PAC file selection SW will extract complete device info ( build version, time, HW details etc. )
During Flash Reading SW will extract complete device info ( build version, time, HW details etc. )
Readout naming changed to DeviceInfo details instead of flash size/flash vendor
Repair security revised
Database revised, loaders updated ( extended range of supported SC6531EFM devices with 4-8MB flash )
Spreadtrum/UniSoc other:
Protocol updated, error codes handling activated
SC6531 with 16MB flash support revised
FTM during flashing now make DNVM clean, FS clean and structure verification
UserCode reading improved
Some other bugfixes and small changes
Info:
"HardLock" detection feature for SP-locked device activated under test
We are looking for SP-locked samples RDA Micro / UniSoc / SPDR FP platforms. Please contact to rd [at] infinity-box.com if you have units for test on hands.
Password for archive file (if any) is: 12345678
Download link #1
Download link #2
Infinity Chinese Miracle-2 SPD/UniSoc v2.02 - Android9, Privacy, New models and features
As ordinary, Infintiy Team continue to release unique and world-first software features, algorithms and methods.
- Core
Protocol updated
Error handling, error explanation and hint module activated
SC9850 and similar devices WRITEFLASH security disable option enabled
> Use for custom / forced / service operation on secure-enabled SC9850 phones (in case of "AC SECURITY" error)
- Android 9 line devices tested and supported for Firmware reading!
- Self-Learning mode for Firmware Reader activated!
That feature allow analyze new and unknown devices "on the fly" and make complete and correct firmware
Just follow the SW instructions if need and you don't need to wait updates for latest devices
- Service
Security - NVM reading feature activated
> Allow read complete device factory calibration data, security items
> Save also modem info for cross-writing NV between different models
Security - NVM writing feature activated
> Allow restore / rewrite device factory calibration data, security items
> Allow use different modes during restore:
> 1. SWAP ( safe mode ) - if security alive SW will try swap security data
> 2. Complete restore ( rebuild mode ) - destroy ALL original security data if it was inside phone
Identify - better structure detection
Identify - BaseBand deep identification
> Allow read complete BaseBand info and read "MODEM TAG"
> Since nowdays there much SAME devices under DIFFERENT names but same by RADIO part - you may use NVM according that TAG
> TAG now saved during NVM read operation, you can use default Windows search bar in Backup folder to seek need TAG
UserData - PrivacyLock read feature activated
> Allow read PRIVACY lock password and details
> Support DIFFERENT models made by OEM "TRANSSION"
- Flasher
Optimized speed ( from 5% to 15% for UniSoc line )
Optimized PAC handling
Optimized older device line support ( SC7731GEA and similar from SPRD )
NVManager updated - Identify, Backup, Security swap, Verification
Activated new option - Re-Sparse.
> Allow prepare big filesystem images before flash. Useful for low-ram devices and adnroid 9 devices
> Use that option, if have face "INT : WAIT TIMEOUT! DEVICE PROBLEM or WRONG FDL!" error during SYSTEM flashing
- Firmware Reader
Android 9 line support finished, completely tested and confirmead as working
Vendor-specific mode activated. SW will identify "non-standard" devices and make firmware complete and correct now
> FOTA, vendor-specific features and rest stuff has been tested
- Database:
New generic boots included for SC7731C/G
New generic boots included for SC9863
ZTE lines devices included - A5(2019), A7(2019), L130, L8 and some others
- Other
Bug fixes and some changes according users requests
- Known issues :
[1] UniSoc line is SLOW. It is VERY SLOW! It may takes up to 3-4 times more time comparing with old SPRD.
[2] UniSoc devices with ARB active may dbe ead on wrong SW version flashing at Android 9 line.
We are checking that issue and collecting samples. According to users test and reports solution will follow.
[3] Some old devices after FW flashing may gone to "Encryption Unsuccessfull" state, right now - "ResetPhone" button enough.
[4] UniProt option active may lead to FLASHING problems on old SC7715-SC7731 line devices. Disable this option if you have a problem with old SPRD
[5] NAND devices on SC9820, SC7715, SC8830 are not supported yet for FW reading
Password for archive file (if any) is: 12345678
Download link #1
Download link #2
Infinity Data Explorer software
Dear Friends,
Here is an information about Data Explorer software.
This software is a tool that helps to extract user's data from full flash file that you can read from phone with Infnity software (or other tools that can build plain bin file as output).
In this thread we will post news and information about this software functions.
This software is a completely new separate and independent product that has no any relation with previous projects.
This means you should buy an Data Explorer Activation from your seller to be able to use this software.
Data Explorer Activation available for the next Infinity Products:
- Infinity-Box/Dongle
- Infinity [BEST]
- Infinity CDMA-Tool
- Infinity Content Extractor Dongle
If you have any kind of requests about feature and supported models please post it here. We hope to get detailed technical information about features/devices but not only "need update" text.
Thank you for your kind understanding !
There is a special discount (30 IOS credits for today) for users who have bought Content Extractor software in period from 01-Jan-2014 to year 2019.
There is no any automatic discount system ready at the moment but you can post your S/N in current thread and we will return credits to your IOS account after purchase.
Video tutorial Arabic: https://www.youtube.com/watch?v=lRzdqXMNDK4
Download link
Infinity Chinese Miracle-2 SPD/UniSoc v2.03 - Easy Identify, New models & features
As ordinary, Infintiy Team continue to release unique and world-first software features, algorithms and methods.
- Core
Protocol updated
Error handling, error explanation and hint module updated
- Service
NVM operations revized
DiagMode option activated ( Platform -> Control -> DiagMode )
> Change SW mode to diag, instead of flash. Do not require BootSelection.
Allow for now:
1. Identify Device - ModemInfo, Build Info, SecurityInfo, SOC Info, DeviceHW Info
2. Format FS / Reset settings ( NOT touch FRP! ) - WIPE mode
3. Read NV data, verify NV
> Don't forget change SW mode between Service/Flash for those operations !
New Identify option - device Platform, Device HW details identification
> Allow detect device SOC family, RAM amount for faster loader selection
> Work in DiagMode, Work ON MODERN and UNISOC chipset only !
- Flasher
Optimized flashing protocol
Optimized older device line support
NVManager updated - Identify, Backup, Security swap
NVManager Recovery tool updated
- Firmware Reader
Optimized structure identification
Activated "forced" reading. Option skip data verification.
> In case of semi-damaged devices, if backup atleast of something required
> In case of "Critical data damaged" errors
Optimized data verification during create FW
- Database:
SC983xx generic loader DB updated
SC9853i generic loader DB updated
SC7731E generic loader DB updated
SC7731x generic loader DB updated
SC9863 loaders DB updated - BQ, Wiko, ZTE, Symphony
SC7731c/g loaders DB updated - various models and RAM size
SC9832E loaders DB updated - Meizu, Wiko
Some other various models with specific hw settings included in loader DB
- Other
Boot Selection mode are indepedent ( loader base can be changed after FW selection, in Platform tab )
Bug fixes and changes according users requests
- Special thanks to respected Mr. gracy_elec
Download link
Infinity Data Explorer software
Dear Friends,
Here is an information about Data Explorer software.
This software is a tool that helps to extract user's data from full flash file that you can read from phone with Infnity software (or other tools that can build plain bin file as output).
In this thread we will post news and information about this software functions.
This software is a completely new separate and independent product that has no any relation with previous projects.
This means you should buy an Data Explorer Activation from your seller to be able to use this software.
Data Explorer Activation available for the next Infinity Products:
- Infinity-Box/Dongle
- Infinity [BEST]
- Infinity CDMA-Tool
- Infinity Content Extractor Dongle
If you have any kind of requests about feature and supported models please post it here. We hope to get detailed technical information about features/devices but not only "need update" text.
Thank you for your kind understanding !
There is a special discount (30 IOS credits for today) for users who have bought Content Extractor software in period from 01-Jan-2014 to year 2019.
There is no any automatic discount system ready at the moment but you can post your S/N in current thread and we will return credits to your IOS account after purchase.
Video tutorial Arabic: https://www.youtube.com/watch?v=lRzdqXMNDK4
Download link
https://www.infinity-box.com/cdn/tg48.png https://www.infinity-box.com/cdn/yt48.png https://www.infinity-box.com/cdn/fb48.png https://www.infinity-box.com/cdn/tw48.png https://www.infinity-box.com/cdn/ios2-48.png https://www.infinity-box.com/cdn/j48.png
Infinity Data Explorer v1.02 - more devices and CPU types supported
Dear Friends,
Here is an information about Data Explorer software.
This software is a tool that helps to extract user's data from full flash file that you can read from phone with Infnity software (or other tools that can build plain bin file as output).
In this thread we will post news and information about this software functions.
This software is a completely new separate and independent product that has no any relation with previous projects.
This means you should buy an Data Explorer Activation from your seller to be able to use this software.
Data Explorer Activation available for the next Infinity Products:
- Infinity-Box/Dongle
- Infinity [BEST]
- Infinity CDMA-Tool
- Infinity Content Extractor Dongle
If you have any kind of requests about feature and supported models please post it here. We hope to get detailed technical information about features/devices but not only "need update" text.
Thank you for your kind understanding !
There is a special discount (30 IOS credits for today) for users who have bought Content Extractor software in period from 01-Jan-2014 to year 2019.
There is no any automatic discount system ready at the moment but you can post your S/N in current thread and we will return credits to your IOS account after purchase.
Video tutorial Arabic: https://www.youtube.com/watch?v=lRzdqXMNDK4
Download link
Infinity Chinese Miracle-2 MTK/Mediatek v2.07 - New models and features
As you know Infinty Team work hard and silently, but results of silent work may exceed any expectation.
It takes more that hour to prepare list of changes so you can imagine how much time takes a work itself.
Let's respect silent hard work instead of everyday's bla-bla (like many others do).
Thank you to be with us during last 15 years !
List of changes for v2.07:
Core:
NewSOC : MT6785 support under test
NewSOC : MT6885 support under test
Changed : Protocol updated for RAPHAEL line
Changed : Protocol updated for LEGACY line
BugFix : MT6752 support fixed
BugFix : MT8172/MT8173/MT8176 BROM support fixed
BugFix : MT6570 support fixed
Changed : EMI engine revised
Changed : AutomaticBoot selection revised. More types and combinations are supported.
Changed : Loader v1924 supported and tested
Changed : Loader v1936 supported and tested
Changed : Loader v1944 supported and tested
Flasher :
New feature: unmerged signature support
- Files with external signatures now flash correctly
New feature: Forced mode for Raphael line
- Allow automatically skip repartition, erase operations if it was not allowed without break flashing
New feature: WHOLE Flash Pre-Erase
- Erase whole USER region. Destroy ALL data include unique and secure one! Support both Modern and Legacy lines.
Changed: Repartition procedure rebuild to support modern devices and special cases (user memory issues and other fixes)
New feature: Smart erase
- In manual mode selection and enabled pre-erase all unchecked partitions will not be touched
- Storage boundary checks now works correct on legacy and modern lines
Firmware Reader / Maker:
Changed: Local DB updated to latest version
Changed: Scatter creation support latest platforms and variants
Changed: Scatter compatibility with SPFT optimized ( for DL only mode )
New feature: FileSystem creation and params now generated according Android version
New feature: Ability to skip "critical" partitions verification during read ( bl-unlocked devices and specific cases )
MemoryTool:
New feature: Switch working mode ( ADR - PRT options in global settings ) without tool restart (no need to exit and run software again)
New feature: Error ignoring on RAPHAEL line devices. Errors are not triggers shutdown anymore.
Changed: Update PMT operation rebuild. Support modern devices and use multiple factors now.
Changed: Init preloader operation. Support plain preloader dumps that was created by MemoryTool.
Changed: Partition listing style on LEGACY devices. In case of protected regions do not triggered shutdown anymore.
Changed: Write operation now handle correctly some sparse images used in Android 9 and newer versions
Service:
BugFix: Format FS procedure updated
BugFix: Reset FRP procedure updated
BugFix: Identify procedure updated and revised
New feature: eMMC life counter check during Identify
- Show, if possible by Agent or HW, storage life status. LifeCycleEnd(ReadOnly), LifeCycleNearEnd states.
- Support only Raphael newer than MT6739. Support NAND devices as well ( MT6570 )
UserData:
New feature: Reset Privacy Locks
- Support old and modern devices. Procedure is USERDATA SAFE if that required
LoaderDatabase:
Base Loader v1924 included
Base Loader v1936 included
Base Loader v1944 included
New TECNO sec agents included
New VIVO sec agents included
New ALCATEL sec agents included
New Hisense sec agents included
New Moto sec agents included
New Huawei sec agents included
New Lenovo agents included
And other different and generic models can be found in list
Other:
Changed: Base DB revised, unused and "buggy" types removed from BASE agents.
- Change settings if DA version not contain your device platform
Changed: EMIDb updated, more types supported
Changed: Preloader parser now shows more complete memory details
Thanks to:
Special thanks to respected Mr. gracy_elec
Special thanks to respected Mr. Kamal_singla
Download link #1
Download link #2
Download link #3
Password for archive is: 12345678
Infinity Data Explorer software
Dear Friends,
Here is an information about Data Explorer software.
This software is a tool that helps to extract user's data from full flash file that you can read from phone with Infnity software (or other tools that can build plain bin file as output).
In this thread we will post news and information about this software functions.
This software is a completely new separate and independent product that has no any relation with previous projects.
This means you should buy an Data Explorer Activation from your seller to be able to use this software.
Data Explorer Activation available for the next Infinity Products:
- Infinity-Box/Dongle
- Infinity [BEST]
- Infinity CDMA-Tool
- Infinity Content Extractor Dongle
If you have any kind of requests about feature and supported models please post it here. We hope to get detailed technical information about features/devices but not only "need update" text.
Thank you for your kind understanding !
There is a special discount (30 IOS credits for today) for users who have bought Content Extractor software in period from 01-Jan-2014 to year 2019.
There is no any automatic discount system ready at the moment but you can post your S/N in current thread and we will return credits to your IOS account after purchase.
Video tutorial Arabic: https://www.youtube.com/watch?v=lRzdqXMNDK4
Download link
Infinity Chinese Miracle-2 SPD/UniSoc v2.04 - Xiaomi, KaiOs, RepairSec, PACv2 and more
Silent work is much better than thousand words...
- Support for PACv2 format activated
- Core updated
- Protocol updated
- SC9820E support activated ( Generic and Secure types )
- Repair security option activated
Allow repair device security items on generic devices
Work in Flash mode
Work in DiagChan mode
SimLock-enabled devices may NOT work
Security-enabled devices will NOT work
- Firmware Flasher updated
Updated core
Updated PAC types support
Revised NVManager
- Firmware Reader updated
More accurate data verification
Reading speed optimized for some UniSoc models
Android version-depend mode activated ( allow avoid flashing issues on android 9 and newer )
KaiOS devices supported ( SC7731E eMMC, SC9820E eMMC tested and working ) now for Read Firmware
- Identify procedure revised
Now it also support for security verification ( signed NV )
Better FS state verification
More usable build props info extraction
- Revised manual mode selection and possible combinations ( can combine firmware and loader from any source )
- Loader database
SC7715 eMMC loaders included
SC9820 loaders updated
SC9863 loaders updated
SC9820E eMMC loaders included
Various range of models from Wiko, LYF, BLU, BQ, Symphny, Itel and others included in DB
- Other
Bug fixes and changes according users requests
- Extra
Xiaomi QIN 1S+ supported ( Identify, Repair, Firmware Reading, Reset Settings ) BKey : Call button
Xiaomi QIN 2 supported ( Identify, Firmware Flash, Repair, Firmware Reading, FRP, Reset Settings ) Bkey : Assistant button
Xiaomi QIN 2 Pro supported ( Identify, Firmware Flash, Repair, Firmware Reading, FRP, Reset Settings ) Bkey : Assistant button
Special thanks to respected Mr. gracy_elec !
Download link
unpack archive with password: 12345678
Infinity Chinese Miracle II SCR/SPD-RDA v1.07 - RDA8955x CPU line supported
As ordinary, unique functions and methods released
RDA8955x is an extra cheap SoC with 2G/GPS support.
It is used in cheap wearable, IoT and feature phones.
Supported CPU list:
Spreadtrum: SC6530, SC6531, SC6531(A/C/D)
SpreadTrum: SC68xx ( with external PAC )
SpreadTrum: SC770x ( with external PAC )
UniSoc: SC6531E, SC6533, SC6533G, SC770x
RDA Mirco: RDA8955G, RDA8955GE, RDA8955L
RDA Mirco: RDA8851 rev A,B,C,L,CL
RDA Micro: RDA8826
Core
NewChip: Support RDA 8955 Line (8955G, 8955GE, 8955L)
BugFix: Support for some SC6533 revisions fixed ( Wrong PMT issue )
Support RDA 8955 Line (8955G, 8955GE, 8955L)
- Identify ( Security info, compilation info, Hwinfo )
- Format FS / Reset Settings
- Read UserCode / PrivacyCode
- Repair Security
- Read Flash / FW
- Write Flash / FW / LOD
Service
Changed: CompileInfo extraction improved ( RDA / SPRD / UniSoc )
Changed: BOOTROM support improved ( RDA )
Changed: SVC ( Diag ) mode support optimized for modern UniSoc 89xx platforms
UserData
Changed: Security code read in FlashMode revised ( RDA )
Other
BugFix: Lot of small different changes and fixes
Option: GUI ( File -> GUI ) : allow select other interface mode
!* Default - standard V2 line GUI
!* Wide - best for big screen / big distance to monitor
!* Wide Log - extend log window to screen size. Optimal for most cases
Download link #1
Download link #2
Download link #3
Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.10 - New year means new features !
As ordinary, unique functions and methods released
Core
Changed : FlashCore protocol updated
NewSOC: UniSOC Tiger T61x series support
NewSOC: UniSOC UIS7862 (Car HeadUnits SoC) series support
NewSOC: SC7731E Android 10 / FastProto supported
NewSOC: SC9832E Android 10 / FastProto supported
Flasher
Changed : Protocol updated
Changed : NVM manager updated
Changed : FastFlash protocol updated ( SC7731E, SC9832E supported )
Firmware reader
Changed : Android 10 specific changes
Changed : Initial Tiger and NaT devices support
Changed : UltraRead protocol updated ( SC7731E, SC9832E supported under 0S loaders now )
Service
NewFeature: Security Repair allow change PSN1/PSN2
- In newer devices PSN1/2 damage may lead to bootlop, ota and other issues
- In newer devices PSN1/2 used as bootloader token
Changed : Identify : Correct MEMORY and RAM size reading for Android 10 devices
Changed : Identify : Read PSN1 and PSN1
Changed : Identify : SC9832E and SC7731E can be used to verify eMMC ReadOnly state (0S loader mode)
Changed : Repair : Identify signed devices during repair
Changed : NVM : Read and Write operations revised
UserData
Changed : UserData dump feature updated ( Legacy line fixes )
SPUnlock
Changed : SC9863 support updated
Changed : SC9832 support updated
Changed : PermLock fix ( processed in automatic mode, fix issue with possible PermLock after first unlock try )
NewFeature: Error codes explanation and hints
NewFeature: Damaged devices ( security destroyed ) detection
NewFeature: Damaged devices ( permLock ) detection
Model DB
Changed : New generic loaders included for SC7731E with Android 10 ( 0S type )
Changed : New generic loaders included for SC7792E with Android 10 ( 0S type )
Changed : New generic loaders included for Tiger T61x
Changed : New generic loaders included for UIS7862
Changed : ZTE, Itel and others line loaders updated to support faster operatons amd more HW variants
Other
Changed : GUI settings now stored and load select style, settings and other at next run
Changed : Lot of different changes and fixes
Download link #1
Download link #2
Download link #3
Infinity Data Explorer software
Dear Friends,
Here is an information about Data Explorer software.
This software is a tool that helps to extract user's data from full flash file that you can read from phone with Infnity software (or other tools that can build plain bin file as output).
In this thread we will post news and information about this software functions.
This software is a completely new separate and independent product that has no any relation with previous projects.
This means you should buy an Data Explorer Activation from your seller if you want to use this software.
Data Explorer Activation available for the next Infinity Products:
- Infinity-Box/Dongle
- Infinity [BEST]
- Infinity CDMA-Tool
- Infinity Content Extractor Dongle
Download HERE
If you have any kind of requests about feature and supported models please post it here. We hope to get detailed technical information about features/devices but not only "need update" text.
Thank you for your kind understanding !
Video tutorial Arabic: https://www.youtube.com/watch?v=lRzdqXMNDK4
Update 04 Nov 2020:
From v2.08 of SP2 module, users with active DataExplorer module may readout UserData from Android SPD/UniSoc devices.
Due to platform restrictions, those device user data recovery are lead to complete disassemble/desolder FlashIc for dump anything from it.
Now that possible without any additional moves and with just USB cable.
Make sure you have made Identify first, then try check/Dump userdata, if it need to be extrcacted from device.
Even with enabled encryption flags in device, it can be not encrypted by a fact.
Infinity Chinese Miracle-2 MTK/MediaTek v2.17 - Standalone auth ON
As ordinary unique solutions by World famous Infinity Team !
Core
Changed : Protocol updated ( Raphael/Legacy )
NewFeature: Standalone SLA/Auth [Raphael] **
Changed : Internal EMI engine updated : RAPAHEL : UFS support rebuild
Flasher
Changed: Core updated for RAPHAEL line
Changed: UltraFlash feature updated, new security workarounds supported
Service
Changed: Identify
!* Read new Android 10 specific fields, vendor-specific fields
Changed: Smart Reset
!* Optimized support for different customized and generic cases
Changed: HW Report ( RAPHAEL - only )
!* UFS line devices now supported with following features:
- CID info ( FlashIC base info, name, vendor ) - default info, even if boot can nott be completed by some HW or SW reasons
- LifeInfo ( SLC, MLC, EOL status and use counters ) - allow understand how bad it feels
- RPMB info ( is it key programmed or clean and can be re-used )
- Partitioning details and other
- HWreport log saving enabled ( for further analyze )
!* Feature also allow automatic select and store for further use BOOTROM connection settings for RAPHAEL devices ( DRAM init )
!* HWreport not require complete boot in case of semi-dead devices. Useful for HWdebug
!* HWreport result may vary in diffirent models and agents even on the same SoC !
Firmware Reader
Changed : Some modern brand-specific changes ( Xiaomi, Oppo, Vivo, Realme )
Changed : New types supported
Other
BugFix : Many different minor changes and fixes
Changed : Generic protocol rebuild
Info
!**
- Standalone SLA/Auth allow you ignore device security setting and allow boot it without having any DA/Auth/Remote auth support
- You can boot ( with supported SoC ) device with any generic da and perform any need operations
- Support MT6765 - All security versions, no auth need, no special da need, no remote service need
Support Xiaomi, Oppo, Vivo, Realme, Huawei and whatever else existing
- Support MT6785 - All security versions, no auth need, no special da need, no remote service need
Support Xiaomi, Oppo, Vivo, Realme, Huawei and whatever else existing
NOTE: special boot-helper tool should be installed - included in CM2MT2 package
How to Install:
http://dl1.infinity-box.com/00/publi...elper-a/04.jpg
http://dl1.infinity-box.com/00/publi...elper-a/06.jpg
http://dl1.infinity-box.com/00/publi...elper-a/07.jpg
http://dl1.infinity-box.com/00/publi...elper-a/08.jpg
Important step !
http://dl1.infinity-box.com/00/publi...elper-a/09.jpg
Dongle Firmware version required: v0147
Password for archive: 12345678
Download link #1
Download link #2
Download link #3
Infinity Chinese Miracle-2 MTK/MediaTek v2.18 - Standalone MTK auth ON - new models and features
As ordinary, unique functions and methods released
CM2MT2 v2.17 with info about MT67xx auth and test reports are HERE
Core
Changed: Protocol updated ( Raphael/Legacy )
Changed: Loader v2044 supported and tested ( v2028 was unstable with MT6765 )
NewChip: MediaTek AC8227 (Car HeadUnits SoC) supported
NewChip: MediaTek AC8257 (Car HeadUnits SoC) supported
Flasher
Changed: Core updated for RAPHAEL line
Service
Changed: META core updated
Changed: HW Report ( RAPHAEL - only )
- LifeStatus identify revised, in some cases it may shown wrong info. Strongly recommend use latest version for HWcheck !
!* Feature also allow automatic select and store for further use BOOTROM connection settings for RAPHAEL devices (DRAM init)
!* HWreport not require complete boot in case of semi-dead devices, it is useful for HWdebug
!* HWreport result may vary in diffirent models and agents even on the same SoC !
Firmware Reader
Changed: Some modern brand-specific changes (Oppo, Realme)
Changed: New types supported
Changed: Internal Database updated
Model DB
Changed: New agents included for Tecno, Infinix ( with different SoC lines )
Changed: New DA base v2044 included
Other
Changed: GUI settings now stored and load select style, settings and other at next run
Changed: Environment compatibility issue with 32 bit OS has been fixed
Changed: Many different changes and fixes
Download link #1
Download link #2
Download link #3
Infinity Chinese Miracle-2 MTK/MediaTek v2.19 - Standalone MTK auth ON - NEW CPU
As ordinary, unique functions and methods released
Core:
Changed: Protocol updated ( Raphael/Legacy )
AUTH: MT6580 with any security configuration supported standalone !
AUTH: MT6735 with any security configuration supported standalone !
AUTH: MT6737 with any security configuration supported standalone !
AUTH: MT6731 with any security configuration supported standalone !
AUTH: MT6739 with any security configuration supported standalone !
AUTH: MT6750 with any security configuration supported standalone !
AUTH: MT6755 with any security configuration supported standalone !
AUTH: MT6757 with any security configuration supported standalone !
AUTH: MT6761 with any security configuration supported standalone !
AUTH: MT6762 with any security configuration supported standalone !
AUTH: MT6763 with any security configuration supported standalone !
AUTH: MT6765 with any security configuration supported standalone !
AUTH: MT6771 with any security configuration supported standalone !
AUTH: MT6785 with any security configuration supported standalone !
AUTH: MT6795 with any security configuration supported standalone !
AUTH: MT6797 with any security configuration supported standalone !
AUTH: MT8163 with any security configuration supported standalone !
Changed: BootHelper package updated
- Automatic Self-Learning function activated
- Do not need to make HWreport anymore before other operations in most cases !
Service:
Changed: META core updated
Changed: Security repair features rebuild. Bugfixes.
Firmware Reader:
Changed: Some modern brand-specific changes (Vivo, Meizu)
Changed: New types supported
Changed: Internal Database updated
Other:
Changed: Many different changes and fixes
Info:
Alternative MTK drivers package uploaded to support are, intstall it if you have any kind of connectivity issues
[ HOW TO ]
Download link #1
Download link #2
Download link #3
Infinity Chinese Miracle-2 MTK/MediaTek v2.20 - Standalone MTK auth ON - NEW CPU
As ordinary, unique functions and methods released
Core:
Changed: Protocol updated ( Raphael/Legacy )
AUTH: MT6752 with any security configuration supported standalone !
AUTH: MT6753 with any security configuration supported standalone !
AUTH: MT6768 with any security configuration supported standalone !
AUTH: MT6757 support improved/fixed
Service:
Changed: Identify procedure revised
- Support modern Android 10 devices
- Support for Android 11 devices activated
Changed: SmartReset procedure
- Support modern Android 10 devices
- Support for Android 11 devices activated
Firmware Reader:
Changed: Android 10 specific changes for modern devices
Changed: Android 11 initial support
Changed: New types supported
Changed: Internal Database updated
ModelDB:
Changed: Some specific and brand list update
Other:
Changed: Many different changes and fixes
[ HOW TO ]
Download link #1
Download link #2
Download link #3
Infinity Chinese Miracle-2 MTK/MediaTek v2.21 - MT67xx and MT81xx ON !
As ordinary, unique functions and methods released
With this update we finishing following achievements:
Complete MT67xx line support !
Complete MT81xx line support !
Core:
Changed: Protocol updated ( Raphael/Legacy )
AUTH: MT6779 with any security configuration supported standalone !
AUTH: MT6799 with any security configuration supported standalone !
AUTH: MT8127 with any security configuration supported standalone !
AUTH: MT8167 with any security configuration supported standalone !
AUTH: MT8172 with any security configuration supported standalone !
AUTH: MT8173 with any security configuration supported standalone !
Changed: BootHelper updated
- Automatic Self-Learning function improved
Changed: EMI manager updated, most modern devices support has been included
Flasher:
Changed: Core updated for RAPHAEL line
Firmware Reader:
Changed: New types supported
Changed: Internal Database updated
ModelDB:
Changed: Some specific and brand list update
Other:
Changed: Different changes and fixes
Installer:
- Installer become more compact and now contain two parts: required and optional
- Optional Installer CM2MT2-boot-pack contain optional (legacy) boot files
Download link #1
Download link #2
Download link #3
Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.11 - Unlock, Repair, New CPU
As ordinary, unique functions and methods released
Core
Changed: FlashCore protocol updated
NewSOC: UMS9117 support ( service mode )
Flasher
Changed: Protocol updated
Changed: NVM manager updated
Firmware reader
Changed: Android 10 specific changes
Changed: UltraRead protocol updated
Changed: New types supported
Service
Changed: Repair : Security Repair allow now repair signed devices
- Permanent lock and other issues can be also fixed with that feature
- Repair can be done in Flash and Diag mode
- Repair support new security devices as well ( Android 10 + )
Changed: Repair : UMS9117 repair security support activated ( Nokia line supported included )
Changed: Identify : Enabled Read All Info by default under FlashMode
Changed: FormatFS : UMS9117 Reset/Format FS support activated
SPUnlock
Changed: UMS9117 support activated ( Nokia line supported included )
Changed: SC9863, SC9832 support improved
Other
Changed: Many internal changes and fixes
Drivers: UMS9117 drivers are at support area
Download link #1
Download link #2
Download link #3
Infinity Chinese Miracle-2 MTK/MediaTek v2.23 - New models and features
As ordinary, unique functions and methods released
Core
Changed: Protocol updated ( Raphael/Legacy )
NewSOC: ChipConfig for MT6833 activated ( under test )
Changed: BootHelper updated
Changed: Fixed SW reaction to conenction/power issues ( lags/stuck removed )
Changed: META core updated
! Allow connect from now to device, which already in META mode
! Identify by default not reboot device, other operations - reboot
Changed: Fixed Preloader mode handling on some driver versions
Changed: Fixed META init on some devices
Changed: SLA: Development feature to generate and send error reports automatically for unsupported devices
! No any data will be sent without user request
Flasher
Changed: UltraFlash engine updated
MemoryTool
Feature: Activated "Init GPT/PMT with resize" option
! Allow in some cases fix: Stuck/freeze/Rebooting issues on cheap encryption-enabled devices with cheap memory installed
! Issue found on MiPlay, some Infinix and other devices ( should work on more models range )
! Feature work by decrease UserData space size to avoid "bad blocks"
Service
Changed: SmartReset updated
Changed: SmartReset Extra mode updated
! SmartReset Extra acts like ordinary ones, but make additional, brand-required operations :
- Reset MiAcc for XIAOMI ( non-permanent )
- Reset FlyMe acc for MEIZU
- Reset DEMO mode on VIVO devices ( under test )
! Other, vendor-specific scripts can be included by users requests
Changed: "Restore Backup" option updated
! Clean and prepare files for correct restore in secure devices revised
Firmware Reader
Changed: New types supported
Changed: Internal Database updated
Other
Changed: Some general changes and fixes
Changed: Connection mode fixes
Download link #1
Download link #2
Download link #3
Infinity Chinese Miracle-2 MTK/MediaTek v2.24 - UniversalBoot and other features
As ordinary, unique functions and methods released
Core
Changed: Protocol updated ( Raphael/Legacy )
Changed: BootHelper updated
Changed: MT8172/MT8173 support improved
Changed: MT6580/MT6752 support improved
Changed: MT6735/MT6737/MT6753 support improved
NewFeature UniversalBoot: EMI Engine
! Allow boot device without need of preloader or whatever else, all settings got from device
! Feature support generic and secure devices as well from MT6580 up to MT6799 , MT81xx line also supported
! Some device may NOT work : Fully ERASED or RE-MARKED CID
! Feature ovveride default EMIDB , from Firmware and BootHelper
! Disable/Enable : Settings -> FireFly : AutoEMI ( Enabled by Default )
NewFeature UniversalBoot: AutoDA select
! At wrong base DA selection software will automatically change DA base for connected device
! Feature will select most correct, well tested and usable DA for target
! Must be installed complete bootPackage ( before v2.21 ) for correct work!
!With UniversalBoot feature work with most devices will reduce just to operation select and device connecting ( BROM mode prefered )
!No other optional steps required
Flasher
Changed: UltraFlash engine updated
Changed: Legacy FlashCore rebuild
! Optimized for modern/old DA versions and different targets on OLD CHIPs
! Use of latest version for service LEGACY lines is strongly recommended
Changed: Default FlashSettings updated
MemoryTool
Changed: "Init GPT/PMT with resize" feature improved
Service
Changed: "SmartReset" updated
Changed: "SmartReset Extra" updated
Firmware Reader
Changed: New types supported
Changed: Internal Database updated
Other
Changed: Some general changes and fixes
Download link #1
Download link #2
Download link #3
Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.12 - New repair level activated
As ordinary, unique functions and methods released
Core
Changed: FlashCore protocol updated (R25)
Changed: New DL-core support (v10 at Infinity notation)
NewSOC: SC9820e [RS/0S] with NAND supported
Changed: Diag protocol updated
Flasher
Changed: Protocol updated
Changed: FlashCore rebuild
- Reworked FlashErase
- Reworked support of fully erased or semi-damaged modern devices Android 8/9/10/11 (SC9820e, SC7731e, SC9832e, SC9863, SC9850), it is possible to repair these devices from any state (in case of working HW)
- Reworked NVRecovery procedure
- Android version change ( Downgrade/Upgrade ) now work more correct
Firmware reader
Changed: Android 10 specific changes
Changed: KaiOs specific changes
Changed: Initial Android 11 support
Changed: UltraRead protocol updated
Changed: Fixed "Encryption Unsucessfull" errors on some devices after flash
SPUnlock
Changed: Android 11 SPunlock and Repair confirmed and working
Changed: UniSoc Tiger T310 initial SPUnlock/Repair support
Changed: Changed unlock procedure for some devices
Changed: Allow check status/continue unlock on zero balance
Almost all existing on market devices for SP-Unlock and Repair are supported, Android 10 / 11 "security" as well
Model DB
Changed: New generic loaders included for 9820E with NAND
Other
Changed: Many other different changes and fixes
Download link #1
Download link #2
Download link #3
Password for files: 12345678
Infinity Chinese Miracle-2 MTK/MediaTek v2.25 - MT68xx line, new models and features
As ordinary, unique functions and methods released
Core
Changed: Protocol updated (Raphael/Legacy)
NewSoC : MT6873 support activated
NewSoC : MT6885 support activated (under test)
Changed: BootHelper : core updated
Changed: FireFly : EMI updated
Changed: MT817x line support improved
Changed: Boot : HWinfo parsing improved
Changed : UniversalBoot : EMI Engine
! Selection rules updated
! By default during Flashing used FW as source
! EMI collecting speed optimized, now more faster on auth-enabled devices
! BootHelper <> FireFly interaction optimized
NewSoC : MT6873 supported features
! Standalone SLA : supported
! FireFly : EMI : supported
! META operations : supported
! Firmware Read : supported
! Firmware Write : supported
! Reset Settings : supported
! Reset FRP : supported
! Misc Operations : supported
Flasher
Changed: UltraFlash engine updated
! Tuned up for multi-failed regions ( like Huawei )
Changed: Default FlashSettings updated
Firmware Reader
Changed: Huawei support activated!
! Allow read CORRECT firmware but not a useless/harmful dump etc.
! Sparsing for Huawei-specific partitions activated - extremely reduce FW size
Changed: New types supported
Changed: Internal Database updated
Changed: Activated sparsing (reduce firmware size and increase flashing speed) for:
! - F2FS
! - HuaweiFS
Changed: MT6873 specific changes ( new formats and types )
- Allow read CORRECT firmware without damage FOTA/OTA, Security etc.
- Final result Firmware is like factory one
Changed: MT6885 specific changes ( new formats and types )
- Allow read CORRECT firmware without damage FOTA/OTA, Security etc.
- Final result Firmware is like factory one
Service
Changed: META protocol updated
! Support MT68xx line
! Legacy bugfixes
Changed: HWReport improved (MT68xx line support)
Changed: "SmartReset" updated
Changed: "SmartReset Extra" updated
! Vendor-specific mode activated for SAMSUNG phones
! Device brands, supported in EXTRA mode: Vivo, Meizu, Xiaomi, Samsung
Other
Changed: Many different general changes and fixes applied
Download link #1
Download link #2
Download link #3