-
Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.13 - Boot RSA Auth activated
As ordinary, unique functions and methods released
Core
Changed: FlashCore protocol updated
Changed: Automatic detection and use loaders with PMTInfo
Changed: FlashLoader authentification [RSA and AES] activated ( brand-specific )
- Allow service over FlashMode models, which require remote authentification
- Supproted Brand lines: Itel - all RSA-auth enabled models
- Supported default prod auth - Generic models, RSA and AES
- After sucessfull auth you have full access to any service operations - flash read, write, frp, repair
- Feature require Internet access and valid IOS username and password
- Feature is free and unlimited for all currently supported models
Flasher
Changed: Protocol updated
Firmware reader
Changed: New range of generic and brand-specific models support for safe and complete Firmware Read
Changed: NAND support revised
Model DB
Changed: Moto G20 (XT-2821-X line) included in list (support under test)
Other
Changed: Some changes and fixes
Download link #1
Download link #2
Download link #3
-
Infinity Chinese Miracle-2 MTK/MediaTek v2.26 - New Core, BootLoader Unlock and more
As ordinary, unique functions and methods released
Core
Changed: Protocol updated (Raphael / Legacy)
Changed: MT6785 support fixed
Changed: MT6885 support fixed
Core: Protocol: FireFly activated
FireFly - Universal DownloadAgent that was created by Infinity Team to reach new service level and provide advanced features
Current Supported SoC (initial release):
MT6765
Support operations:
Identify: Device Info (Android), HWInfo with Full eMMC and EOL info
Format FS: Smart Reset, Extra and all other modes are supported
MemoryTool: Allow execute ALL supported MemoryTool functions
! Read, Write (Binary, Sparse, Signed, Unsigned), Make FileSystems, Wipe, extra features
! Unlike MTK mode FireFly IS NOT rely on DA/Device security policy so there is no limits for different operations (No any Write / Erase issues)
BootLoader Unlock: Allow Unlock device Bootloader - WITHOUT touching UserData
! Bootloader unlock also allow unlock Brand-Specific cases (Xiaomi supported at the moment)
Changed : UniversalBoot : BootHelper
! Software always try to init BootRom mode if it's required for selected target
! Software allow force BootRom mode for generic models (plain one) if it's required
! In current release 4 different ways activated which cover most of cases but may not work with some cases, more to come
Flasher
Changed: UltraFlash engine updated
Firmware Reader
Changed: New types supported
Changed: Internal Database updated
Changed: Huawei line changes and fixes
Service
Changed: HWReport improved
Changed: "SmartReset" updated
Changed: "SmartReset Extra" updated
! Vendor-specific mode improved for Samsung devices (A4x and others)
! Device brands supported in EXTRA mode: Vivo, Meizu, Xiaomi, Samsung
Changed: Identify operation now save preloader backup
Changed: Identify opertaion now show OTP info for Alcatel-like and similar devices
NewFeature : BootLoader Unlock Activated ( No data Loss )
Changed: Full MemoryInfo (include CSD, WP status, EOL info etc.) now shown in FireFly mode by default
Memorytool
Changed: Preloader Init has been rebuild - Raphael, Legacy, FireFly
Changed: Automatic selection rules updated
Changed: Extra operations updated
Changed: FileSystem build revised
Changed: FireFly as core protocol supported in MemoryTool
Other
Changed: Many different general changes and fixes applied
Changed: Protocol/SoC Generation switch can be done over "Platform" in System Menu
! According to Platform/Protocol selection some features may enabled or disabled - make right Platform selection before operation!
Download link #1
Download link #2
Download link #3
Infinity-Box as nobody else since year 2005
-
Infinity Chinese Miracle-2 MTK/MediaTek v2.27 - MT6853, MT6853, Samsung, FireFly and more
As ordinary, unique functions and methods released
Core
Changed: Protocol updated ( Raphael )
NewSOC : MT6833 support activated ( any security state )
NewSOC : MT6853 support activated ( any security state )
Changed: MT68xx line support optimized ( FireFly:EMI, EMI Engine, UltraFlash )
Auth
AUTH: MT6833 with any security configuration supported standalone!
AUTH: MT6853 with any security configuration supported standalone!
Core: Protocol: FireFly updated
FireFly - Universal DownloadAgent that was created by Infinity Team to reach new service level and provide advanced features
New SoC activated:
MT6768
MT6771
Current Supported SoC:
MT6765 ( any security configuration )
MT6768 ( any security configuration )
MT6771 ( any security configuration )
Support operations:
Identify: Device Info (Android), HWInfo with Full eMMC and EOL info
Format FS: Smart Reset, Extra and all other modes are supported
MemoryTool: Allow execute ALL supported MemoryTool functions
! Read, Write (Binary, Sparse, Signed, Unsigned), Make FileSystems, Wipe, extra features
! Unlike MTK mode FireFly IS NOT rely on DA/Device security policy so there is no limits for different operations (No any Write / Erase issues)
BootLoader Unlock: Allow Unlock device Bootloader - WITHOUT touching UserData
Changed : BootLoader unlock : ability to re-lock bootloader ( software will ask if device already unlocked for re-lock it back )
Flasher
Changed: UltraFlash engine updated
Changed: Samsung flashing support activated ( MTK models , only CM2 firmware! )
Changed: MT68xx line specific changes
Firmware Reader
Changed: New types supported
Changed: Internal Database updated
Changed: SAMSUNG devices line support activated!
! Allow read COMPLETE, SAFE, USABLE firmware. No any security damage, no any additional reflashing after required
Changed: MT68xx line specific changes
Changed: Android 9-10-11 DevInfo optimized
Changed: Firmware naming optimized
Changed: Vendor Specific : OPPO devices support optimized for read firmware
Changed: Vendor Specific : VIVO devices support optimized for read firmware
Service
Changed: "SmartReset" updated
Changed: "SmartReset" now activated for LEGACY line devices
! Device range : From MT6572 and up to 6737
! Tested SoC/Devices : MT6572, MT6592, MT6595, MT6735, MT6737, MT6752, MT6753, MT8127, MT8172, MT6580
! Tested Android version : 4.4, 5.x, 6.x, 7.x, 8.x, 9.x, 10.x
! Info : Due to wide range of LEGACY devices some of them may work not correct so, please, leave us reports about issues!
Changed: Identify operation now read more device info ( Android 10/11 )
MemoryTool
Changed: Init GPT updated ( Normal / Resize mode )
Changed: Extra operations updated
Changed: Operations in FireFly mode updated
Other
Changed: Many different internal changes and fixes applied
Download link #1
Download link #2
Download link #3
-
Infinity Chinese Miracle-2 CM2MT2 v2.28 - MT6877, MT6893, Repair Security and more
As ordinary, unique functions and methods released
Core
Changed: Protocol updated for Raphael / Legacy platforms
NewSOC: MT6877 supported - any security state - SLA, DAA, Plain
NewSOC: MT6893 supported - any security state - SLA, DAA, Plain
Changed: FireFly / Infinity DA (Download Agents) updated
Changed: NVRAM manager has been rebuild from scratch
For now it covers all Old and Modern devices for Identify and Repair operations in FlashMode!
FireFly - Universal DA (Download Agent) that was created by Infinity Team to reach new service level and gives features
FireFly: NewSOC: MT6739
FireFly: NewSOC: MT6761
FireFly: NewSOC: MT6763
FireFly: New operations supported:
Repair Security for Generic, Vivo and all other non-signed cases
Read / Write NVRAM
Restore Backup
Current list of supported SoC:
MT6739
MT6761
MT6763
MT6765
MT6768
MT6771
Supported operations:
Identify: Device Info ( Android ), HWInfo with Full eMMC and EOL info
Format FS: Smart Reset, Extra and all other mode are supported
MemoryTool: Allow execute ALL supported MemoryTool functions
BootLoader Unlock: Allow Unlock device Bootloader - WITHOUT touching UserData
Repair Security for Generic, Vivo and all other non-signed cases
Read / Write NVRAM
Restore Backup
Flasher
Changed: UltraFlash engine updated and also any limitations has been removed
Changed: Flash engine updated
Firmware Reader
Changed: New types supported
Changed: Internal Database updated
Changed: MT6877 support
Changed: MT6893 support
Changed: Fake "Samsung" devices processing fixed
Service
Changed: "SmartReset" updated
Changed: "SmartReset Extra" updated
Changed: "Identify" operation now show more security info
Changed: "Identify" operation now show modem info/version
Changed: New NVRAM engine/tools
! Read device security now works with Legacy (Old/New) and Raphael (Old/New) lines
! Rebuild check/verify procedures for modern devices
! Repair Security now works in flash mode for Raphael line too ( support most UNSIGNED types - Generic, Huawei, Vivo, Nokia etc. )
! Repair security NOT work with vendor-signed devices ( you will get info about device not supported during operation )
! Signed/Generic mode detection improved
Changed: Restore Backup operation has been updated
Changed: NVRAM read and write operations has been updated
Memorytool
Changed: FireFly mode support updated
Other
Changed: Many different general changes and fixes applied
Feature: Feedback - BugReporting/DebugData collection module enabled. Feedback can be enabled/disabled during installation.
! Feedback feature made for fast, automatic reporting to team about new/unsupported devices in different operations without any additional need of actions from user side.
! That will allow bring server-side updates faster and make updates for new and unsupported phones, if need, every day!
Download link #1
Download link #2
Download link #3
-
Infinity Chinese Miracle-2 CM2MT2 v2.29 - MT6781, A/B Reader and more
As ordinary, unique functions and methods released
Core
NewSOC : MT6781 supported - any security state - SLA, DAA, Plain
Changed: Protocol updated for Raphael / Legacy platforms
Changed: FireFly / Infinity DA (Download Agents) updated
Agent : DA v2136 skipped, unstable
FireFly
FireFly: NewSOC: MT6735 [Legacy]
FireFly: NewSOC: MT6737 [Legacy]
Current list of supported SoC:
Legacy : MT6737, MT6735
Raphael : MT6739, MT6761, MT6763, MT6765, MT6768, MT6771
!! EOL info and other HW stuff also shown for LEGACY
!! In most cases on LEGACY devices UserData encryption can be not set.
!! FireFly allow boot/read even devices with dead DRAM. No need to desolder eMMC for data recovery!
Flasher
Changed: UltraFlash engine updated
Changed: Flash engine updated
Firmware Reader
Changed: A/B devices support activated!
! Android 10/11/12 with A/B slots processing is now supported
! Read FW is completely like factory one!
! Read FW is NOT damage anything on device! ( FOTA, A/B switch and other )
! Read FW is NOT read "broken" slots = no any further issues!
! Read FW identify active/alive slots = always WORKING firmware, extremely reduse FW size ( for ABv1 )
Changed: Database rebuild. Branded : Support most of modern LG, Oppo, Samsung, Vivo, Infinix, Tecno and other brands.
! All this is completely safe and factory-like firmwares!
Changed: Database rebuild. Unbranded : Many "noname" and small brands supported now as well.
! All this is completely safe and factory-like firmwares!
Changed: New types supported
Changed: Internal Database updated
Changed: MT6781 support
Service
Changed: "SmartReset" updated for Android 10/11 devices.
Changed: "SmartReset Extra" updated
Changed: "Identify" operation now show more device info
Changed: Restore Backup operation has been updated
Changed: SPUnlock updated. Unsupported types reporting activated if user enable that option
Other
[+] About 200 different general changes and fixes applied to algorithms and methods
[+] Software Update checker feature enabled
Download link #1
Download link #2
Download link #3
How to upload files to support
-
Infinity Chinese Miracle-2 CM2MT2 v2.30 - More models & Features
Core
Changed: Protocol updated for Raphael / Legacy platforms
Changed: FireFly / Infinity DA (Download Agents) updated
FireFly
FireFly: NewSOC: MT6580 [Legacy]
Current list of supported SoC:
Legacy : MT6580, MT6735, MT6737
Raphael : MT6739, MT6761, MT6763, MT6765, MT6768, MT6771
!! EOL info and other HW stuff also shown for LEGACY
!! On LEGACY devices in most cases UserData encryption can be not set
!! FireFly allow boot/read devices even with dead DRAM - no need to desolder eMMC for data recovery!
Flasher
Changed: UltraFlash engine updated
Firmware Reader
Changed: New types supported
Changed: Internal Database updated
MemoryTool
Changed: UltraFlash activated by default, no more any write restrictions
Changed: Read/Write/Erase operations revised
Service
Changed: "SmartReset" updated for Legacy and old Raphael lines
Changed: "SmartReset Extra" updated
Changed: "SmartReset Data Safe" option activated
Remove all APP and Security settings, retain userdata for Vivo, Oppo.
It works for limited number of models at the moment, it depend on android version/build, use at own risk!
Brand/model selection is not required, autodetection works
Other
Changed: Many different general changes and fixes applied
Download link #1
Download link #2
Download link #3
-
Infinity Chinese Miracle-2 CM2MT2 v2.31 - New features activated
Core
Changed: Activated FireFly over DA
! Support latest UFS-based SoC : MT6781, MT6785, MT6779, MT6833, MT6853, MT6873, MT6877, MT6891, MT6893
! Support eMMC-based SoC : MT6739, MT6757, MT6761, MT6763, MT6765, MT6768, MT6771, MT6779, MT6797, MT8167
! Supported operation : Generic MTK + Bootloader Unlock is available now for all latest SoC
FireFly
FireFly: NewSOC: MT6753 [Legacy]
FireFly: Bootloader Unlock activated for LEGACY phones
! Support for now: MT6580, MT6737 ( tested and confirmed as working )
Current list of supported SoC:
Legacy : MT6580, MT6735, MT6737, MT6753
Raphael : MT6739, MT6761, MT6763, MT6765, MT6768, MT6771
!! EOL info and other HW stuff also shown for LEGACY
!! On LEGACY devices in most cases UserData encryption can be not set.
!! FireFly allow boot/read even for devices with dead DRAM - no need desolder eMMC for data recovery!
Flasher
Changed: UltraFlash engine updated
Firmware Reader
Changed: New types supported
Changed: Internal Database updated
Changed: Vivo, Oppo, Realme - firmware naming optimized - model, type, internal versioning etc.
MemoryTool
Changed: MemoryTool rebuild
Changed: Activated "Make Backup" option
Changed: Activated "Restore Backup" option
Service
Changed: "SmartReset" rebuild
!Remove flyme account improved ( meizu )
!Reset FRP may fail on some devices, fixed
!Improved work in FireFly mode
!Improved compatibility with old Android(4 - 7) versions
Changed: Security info reading improved
Changed: Reset PrivacyLock activated under FireFly mode
Changed: Backup ext_csd data during Identify under FireFly mode
Changed: Bootloader Unlock rebuild (FireFly / Generic)
Changed: Bootloader Unlock activated for more SoC : MT6757, MT6781, MT6785, MT6779, MT6797, MT6833, MT6853, MT6873, MT6877, MT6891, MT6893, MT8167
Changed: Bootloader Unlock activated for more SoC : MT6580, MT6737
Other
Changed: Many internal changes and bugfixes
Download link #1
Download link #2
Download link #3
-
Infinity Chinese Miracle-2 CM2MT2 v2.32 - RPMB, more Repair & Service features
As ordinary unique functions and methods released
Core
Changed: FireFly loaders has been updated
Changed: FireFly DA loaders has been updated
Changed: RPMB operations activated - Read, Write, Erase
- Supported SoC: MT6739, MT6761, MT6763, MT6765, MT6768, MT6771, MT6779, MT6781, MT6785, MT6799, MT6833, MT6853, MT6873, MT6877, MT6885, MT6893
- Fast: 1 | 2 minute for 16MB on eMMC and UFS on Read | Write & Erase
- Easy and Safe: automatic backup at service cases, data verification
MemoryTool
Changed: MemoryTool rebuild
Changed: Activated RPMB operations menu
- Allow Read RPMB memory
- Allow Write RPMB memory
- Allow Wipe RPMB memory
Service
Changed: "SmartReset" rebuild
- Smart Reset Extra updated: support Huawei Account reset: EMUI 9-10
- SmartReset in DataSafe mode check and warn about "fixed" devices, where data loss possible
Changed: Identify operation improved
Changed: Repair Security
- Repair security now support VIVO devices
- Repair case select automatic, not need select / choose / do anything extra.
New Feature: ServiceReport: Allow read device-specific data and send to R&D team directly: Menu -> Extra -> Make ServiceReport
This option helps to collect hardware database and improve device detection process.
Other
Changed: GUI changes : MemoryTool menu, Dialogs
Changed: Many importnatn internal changes, bugfixes and improvements
Download link #1
Download link #2
Download link #3
-
Infinity Chinese Miracle-2 CM2MT2 v2.33 - New repair and service features
As ordinary unique #CM2 functions and methods released
Core
Changed: Protocol updated (RAPHAEL/LEGACY)
Changed: FireFly OverDA has been updated
MemoryTool
Changed: MemoryTool rebuild
Changed: Activated "Restore Backup" with security only mode
Changed: Activated "Open active folder" button
Changed: Activated Init GPT from binary file
Changed: RPMB operations optimized
Changed: RPMB unificated type detection ( "swapable" types even on programmed RPMB )
Flasher
Changed: Protocol updated (RAPHAEL)
Changed: UltraFlash protocol updated
Changed: Renamed "Check HW" to "Check Compatibility"
- Now software check also compatibility between selected firmware and phone firmware sides
- You will see a warning about any issues with incompatible combinations, which may lead to device/security damage
- in case of enforced flashing can be used "Restore Backup" to recover security data (with enabled Security Only" option)
Changed: Backup option during flashing enforced by default
Service
Changed: "Smart Reset" rebuild
Changed: "Smart Reset Extra" rebuild
- Smart Reset Extra updated: Improved Huawei Account reset ( "old types" and "modern types" supported )
- Smart Reset Extra updated: Improved Samsung support : Reset/Change KG
Required mode can be changed in software Settings tab!
- Factory Reset : FRP reset only option updated, now brand-indepedent ( If need reset FRP only, without Smart-ones )
- Factory Reset : FullFactory[1] and Factory[2] methods issues can be reset by other methods ( "No recovery command" issue )
- Factory Reset : Optimized latest firmwares-devices settings detection
Changed: Identify operation improved
Changed: Restore Backup option improved : ability to restore "security" only items instead of full range (by enabling "Security Only" checkbox)
Other
Changed: GUI changes : MemoryTool menu, Dialogs, GUI fixes on older OS types
Changed: Many importnatn internal changes, bugfixes and improvements
Changed: RPMB with "type3" supported - unique feature, see the power
Download link #1
Download link #2
Download link #3
-
Infinity CM2MT2 boot pack v2.22 released with updated loaders:
[+] Acer
[+] Archos
[+] Blackview
[+] Oppo
[+] Realme
[+] Xiaomi
More co come
Download link #1
Download link #2
Download link #3
Infinity CM2SP2 boot pack has more than 400 loaders for many different brands and models!
How to use:
1. Download CM2SP2 installer and CM2SP2-boot-pack installer from support server
https://cdn.infinity-box.com/cm2sp2/boot-pack/e.png
2. After you install CM2SP2 and you will get base/generic loaders installed
https://cdn.infinity-box.com/cm2sp2/boot-pack/a.png
3. Install CM2SP2-boot-pack and you will get custom per brand/model loaders installed
New loaders located at your HDD at /CM2SP2/boot/ folder
https://cdn.infinity-box.com/cm2sp2/boot-pack/d.png
4. Now you can select many brands and models from drop-down software list
https://cdn.infinity-box.com/cm2sp2/boot-pack/b.png
https://cdn.infinity-box.com/cm2sp2/boot-pack/c.png
Download link #1
Download link #2
Download link #3
-
Infinity Chinese Miracle-2 CM2MT2 v2.35 - general improvements and fixes
- Internal changes and fixes for protocols applied
- Internal changes and fixes for flasher applied
- Internal changes and fixes for preloader parser applied
- Preloader database handling updated
- Preloader database remote verification enabled by default
- Log engine updated: log files created for each session and stored to /log/ directory
- Deep Info parser enabled by default
- User Interface updated
- Product-specific Loader [DA] files moved to CM2MT2-boot-pack
- Required Dongle firmware version: 0153
Download link #1
Download link #2
Download link #3
Previous discussion CM2MT2 v2.34 is here
-
Infinity Chinese Miracle-2 #CM2MT2 v2.36 - general improvements and fixes
Dongle firmware version required: 0153
- SmartInfo parser output revised
- NVRAM parser output revised
- Firmware remote verification enabled
- Device remote verification enabled
- Preloader parser revised and fixed
- Peloader remote verification enabled
- "KG State" moved to Service page
- "Help" menu
- View log files by right mouse click on message window
- View log files via "File" menu
- "Logs" button at main window to view log files
- "Snap" button at main window to make screenshot
- "Stop" button at main window
- Verification for preloader|da|firmware integrity
- Show current settings at operation start
- Show "Local SLA" state at operation start
- Show "Flash Write" settings at operation start
- "HW Report" mode selection changed
- "Check Account" button at "Settings" page to verify Username and Password validity
- Loaders remote verification enabled
- Show loaders information at boot time
- Memory chip life-state warnings updated
- "Stop" item removed from the top menu
- Boot stage loader files information revised
- "GUI Mode" item removed from the top menu and moved to "View" button
- "Memory Tool" moved to "Service" page
- "Make Service Report" moved to "Service" page
- "Settings" -> "Firefy : EMI" menu item moved to "FireFly : AutoEMI" at "Settings" page
- "GUI mode" save/restore on startup
- "Change GUI mode" via "Settings" menu
- HW Compatibility Wizard enabled
- Server Hints engine enabled
- "PMT Info" option at "Platform" page display Partition Info during "Identify"
- "Save Boot Config" option at "Platform" page to store detected model config to models list
Download link #1
Download link #2
Download link #3
-
Infinity Chinese Miracle-2 #CM2MT2 v2.37 - general improvements and fixes
- "Restore Backup" config mode updated
- "Restore Backup" allow to select files manually
- Flash file (Scatter) Open|Select|Clean buttons at "Flash" page
- Flash file (Scatter) parser updated
- Flash file (Scatter) selection issue fixes
- MemoryTool file selection issue fixes
- MemoryTool gui minor changes
- "Switch to HS USB" option removed
- Config storage engine updated
- Account Check gives balance and subscription date
- "PMT Info" config value stored
- "Flash" page minor gui changes
- Loaders remote verification revised
- Installer updated to manage previously installed boot-pack
- Required Dongle firmware version: 0153
Download link #1
Download link #2
Download link #3
-
Infinity Chinese Miracle-2 CM2MT2 v2.38 - general improvements and fixes
!!! WARNING !!!
Backup files storage structure changed, files and folders will be compressed. Here is backup files structure
Software will convert files and folders at first run!
If you have important data - make /backup/ folder copy for emergency case!
Process may takes time, BE PATIENT!
- Startup process revised
- Backup files are packed, zip and 7z formats are supported (7z.dll is required)
- Backup files default format is 7z
- Backup|Restore partitions list updated
- Backup overwrite request for "Identify" only, skip existing backup replacement for other operations
- Partition size verification during backup
- File content verification (zeroes) during backup creation
- File content verification (zeroes) during backup restore
- Display hw|sw info to log during backup file selection
- Restore backup images with .bin and .img extensions
- Legacy settings values removed
- MemTool work path save|restore
- MemTool window position save|restore
- MemTool ui changes
- Log window style customization
- HW Report behaviour changed depends on selected Platform
- Cloud: display hw|sw info about last connected device
- Cloud: get previously stored backup file
- Flash chip vendors list updated
- ufs parser revised
- emmc parser revised
- emmc failure detection improved
- nand parser revised
- Firmware read/write last selected path save|restore
- scatter file creation process rebuilded
- scatter file load process revised
- META mode connection method revised
- META mode info and device version output revised
- META mode memory leak fixed
- Check free disk space on startup
- Check free disk space on Flash Read
- Flash Read file selection method updated
- Flash Read process termination revised
- Backup before Reset in META mode
- Backup before Reset in Flash mode
- extcsd backup file content verification
- PMT (partition table) info output slightly changed
- PMT (partition table) info included to device.txt during backup
- Store device.txt with hardware and software info to backup
- Store device.txt with hardware and software info to firmware
- Store device.txt file as ini
- Store loaders config to device.txt file
- Verify backup presence before process
- Error messages and software hints updated
- More software hints for [Format] operations
- More messages in log about process flow
- [SMART RESET EXTRA] error handling revised to recover after error
- Create Screenshot [Snap] as .png instead of .bmp (quite compact)
- Device brand|model detection revised
- Updates checker rebuilded
- External update checker disabled
- External firmware uploader enabled
- [Stop] process revised
- Customs Settings -> EMI button extract prevoader from partition image on load
- MemTool selection mode for 128 Mb and 256 Mb in list
- MemTool file selection revised
- MemTool operations revised
- [Flash] page minor ui changes
- [Security] page minor ui changes
- [NVRAM Read] operation revised
- [NVRAM Write] operation revised
- NVRAM backup file format changed
- [Restore Backup] operation allow to select backup file
- [Restore Backup] has new restore mode [+preloader]
- Check free disk space before backup
- settings.ini new value [where] backup=backup\
- settings.ini new value [where] boot=boot\
- settings.ini new value [where] tools=..\tools\
- settings.ini new value [where] firmware=firmware\
- SC engine revised
- Files verification config option in [Settings] page
- Files verification for nvram backup enabled
- Memory management engine revised
- [KG] moved to [Misc] section
- Dialogs texts revised. Message text will be visible in log window on selection
- Minor log text messages and ui changes
- Check required dll's on startup
- ssleay32.dll included to installer to improve compatibility
- 7z.dll included to installer
- /tools/iosFileUploader included to installer
- Required Dongle firmware version: 0153
https://cdn.infinity-box.com/ico/tg48.png Infinity Telegram Channel
https://cdn.infinity-box.com/ico/tg48.png Infinity Telegram Chat English
https://cdn.infinity-box.com/ico/tg48.png Infinity Telegram Chat Русский, Українська, Белару́ская #1
https://cdn.infinity-box.com/ico/tg48.png Infinity Telegram Chat Русский, Українська, Белару́ская #2
https://cdn.infinity-box.com/ico/file-folder_48t.png Infinity Telegram Flash File search
https://cdn.infinity-box.com/ico/yt48.png Infinity Video Manuals
https://cdn.infinity-box.com/ico/fb48.png Infinity Facebook Page
https://cdn.infinity-box.com/ico/fbg48.png Infinity Facebook Group
https://cdn.infinity-box.com/ico/tw48.png Infinity Twitter
Download link #1
Download link #2
Download link #3
-
Infinity #CM2MT2 boot-pack v2.40
Infinity #CM2MT2 boot-pack v2.40 with updated loaders
Loaders & structure updated
[+] Condor
[+] Dlight
[+] Xiaomi/Redmi-9c/ linked to base-2112 + preloader file from /Redmi-9/
[+] Xiaomi/Redmi-9a/ updated with preloader file from /Redmi-9/
[+] legacy loaders moved to /0_rare/
[+] /0_base/v17xx/ moved to boot-pack
[+] /0_base/v18xx/ moved to boot-pack
[+] /0_base/v19xx/ moved to boot-pack
[+] /0_base/v20xx/ moved to boot-pack
CM2MT2 v2.39 and higher should be used with the next loaders:
[+] Infinix/Infinix-G99-General/
[+] Infinix/Dimensity-9000/
[+] Infinix/X676B/
[+] Tecno/Tecno-G99-General/
[+] Tecno/Dimensity-9000/
[+] Tecno/Phantom-X2-X2Pro/
[+] /0_generic/ loaders for latest MT6781/MT6789/MT6983 are inside sw installer
Every new boot-pack release has all previous boot-packs included, it means you should only install latest one to get all loaders
Download HERE
-
Infinity Chinese Miracle-2 #CM2MT2 v2.40
General:
FireFly : Protocol updated
FireFly : Activated new operations
1. Firmware Read
2. Firmware Write
3. MemoryTool : EXTCSD Read
4. MemoryTool : EXTCSD Write
FormatFS:
Smart Reset updated: New types supported
Smart Reset updated: Android 13 specific changes
Firmware reader:
Firmware Read activated in FireFly mode
Android 13 support improved [under test]
Firmware flasher:
Flasher Engine updated : [LUCI], [RAPH] and [LEGACY] protocols updated
Firmware Flashing activated in FireFly mode
Service:
Identify : Now read active system info if device belong to AB
BootLoader: Unlock/Lock revised in FireFly and MTK mode
MemoryTool:
New Operation : EXTCSD read - Allow read EXTCSD config from eMMC. Made default at boot also
New Operation : EXTCSD write - Allow write EXTCSD config in eMMC
Both operations supported only in FireFly mode for now!
The Rest:
Loaders updated
Previous versions of loaders partially moved to CM2MT2 boot-pack
CM2MT2 boot-pack v2.40 or newer should be installed to get latest loaders
Log output management updated
BugFixes and minor updates
Required Dongle firmware version: 0154
Download link #1
Download link #2
Download link #3
-
Infinity Chinese Miracle-2 #CM2MT2 v2.41
General:
- FireFly core loader updated: /XFireFly/base/FireFly_AllInOne_DA.bin
- FireFly mode operations updated such as bootloader unlock etc.
- Many internal changes
Image management:
- Preloader parser/converter updated
- Preloader/EMI open dialog updated for bin/img files
- DA, Cert, Auth, Preloader load/verification method updated
User Interface:
- log management engine updated
- software messages revised
Dongle firmware version required: 0154
Download link #1
Download link #2
Download link #3
-
Infinity Chinese Miracle-2 #CM2MT2 v2.42
General:
- Maintenance release
- Memory management improved
- Many internal changes
- Boot time flow process updated
- Boot time error handling improved
User Interface:
- flash chip info output revised
- software messages & hints updated
Dongle firmware version required: 0154
Infinity Chinese Miracle-2 #CM2MT2 v2.41
General:
- FireFly core loader updated: /XFireFly/base/FireFly_AllInOne_DA.bin
- FireFly mode operations updated such as bootloader unlock etc.
- Many internal changes
Image management:
- Preloader parser/converter updated
- Preloader/EMI open dialog updated for bin/img files
- DA, Cert, Auth, Preloader load/verification method updated
User Interface:
- log management engine updated
- software messages revised
Dongle firmware version required: 0154
Download link #1
Download link #2
Download link #3
-
Infinity Android Service Tool #AST v1.04
- Connection methods updated for ADB and Fastboot
- Latest dll's included in package
- Log engine updated
- Stop/Logs/Snap buttons
- gui updated
- user interface save/restore options
- aplication list save on Identify
- Device messages output method revised
- Hints and error messages updated
- "Uninstall Apps" for batch processing by apk list loaded from text file
- "Pixel" bypass method
- Many internal changes
Download link #1
Download link #2
Download link #3
-
Infinity Chinese Miracle-2 #CM2MT2 v2.43
General:
- Device/Firmware detection method updated
- Boot process flow slightly changed
- Boot/Shutdown process updated
- Partition table analyzer rebuilded (primary/secondary)
- Service operations updated - red/orange state and bootloader unlock
- Bootloader lock/unlock process flow updated
- Service Report revised
- FileSystem type output revised
- Device handling Strategy type output revised
- scat load & emi management for "flash write" revised
- MemoryTool operations revised and bugs with menu selection fixed
- Security values processing updated
- META mode output revised
- Preloader parser revised
- EMI handling for legacy devices fixed
- Internal changes - memory management and more
User Interface:
- FLASH/META mode selection changed
- DA Protocol selection changed
- Software messages & hints updated
Download link #1
Download link #2
Download link #3
-
Infinity #CM2MT2 v2.44 Infinix/Tecno no need TP and more features
General:
- Device info detection revised
- EMI processing for legacy hardware (f.e. MT6580) revised
- EMI database rebuilded
- Meizu operations revised
- New feature: Brom ON/OFF - allow enable BROM mode and allow do extended services such as:
All FireFly Features: Boot unlock, testing, service etc.
All FireFly DA features: Boot unlock, RPMB, service and other
NOTE: Read BROM On|Off manual
- Display partition/image size during flash Read/Write
- Device information parser updated
- DA selection mode revised
- DA information/hints displayed on selection for number of loaders
- DA config database updated
- Red|Orange state methods revised
- Incompatible image confirmation during Flash fixed
- Simlock methods output updated
- Format methods output updated
- Infinix and Tecno without testpoint/disassembly included MT6739, MT6761, MT6763, MT6765, MT6768, MT6781, MT6785, MT6833, MT6877, MT6893
- Internal changes - memory management and more
MemoryTool:
- Bulk Read/Write operations updated: selection and Read/Write path sync
- Read/Write file path handling method on file select/cancel revised
- Messages & errors|hints updated
Backup:
- Backup restore process updated with any record On|Off selection
- Select All/None items by right mouse click
User Interface:
- Startup window position config revised
- Software messages & hints updated
Dongle firmware version required: 0155
Download link #1
Download link #2
Download link #3
-
Infinity #CM2MT2 v2.45
- startup process and external dll's handling method revised to avoid 0x0c000007b issue with damaged libusb installation
- boot process revised
- boot/sla error handling method changed
- flash read process revised: luci handling updated and more detailed output
- EMI database structure updated
- MemoryTool file path handling updated, non-existent path check
- external dll's moved to /lib/
- external dll's verification method updated
- separate fscard.ini file is not required any more
- strategy detector updated: honor
- "Restore backup" process revised, issue with filelist fixed
- flash writer display source file size instead of partition size
- flash reader: [Create SCAT] option
- gui resize bug fixed
- auto-update check method changed to once per day
- messages and hints updated
- minor ui changes
- many internal changes and improvements
NOTE: install latest CM2MT2 boot-pack for best results
Download link #1
Download link #2
Download link #3
-
Infinity #CM2MT2 v2.46
LUCI Devices:
- MT6983 support fixed
- UltraFlash protocol updated
Firmware Reader:
- Automatic detection activated
- Software now allow correctly read most modern devices even if they are not tested
- Avoid possible problems with OTA, damaging vendor-unique stuff or any other identification data
Firmware Analyzer:
- Strategy detection revised
- Firmware version detection methods updated
Bootloader unlock:
- Oppo/Realme specific changes
Factory Reset:
- Complete rebuild to automatic / vendor strategy depend mode
Boot methods:
- boot/DA database management revised
SCAT loader:
- Display firmware info on file load
- Display firmware info on flash write start
- Verify loaded image via server
Other changes:
- messages and hints updated
- minor ui changes
- many internal changes and improvements
Download link #1
Download link #2
Download link #3
-
Infinity #CM2MT2 v2.47 - FireFly over preloader mode and more
Main:
FireFly DA activated for RAPHAEL devices in preloader mode.
Support wide range of generic and secure devices on most of the following chipsets:
MT6755, MT6761, MT6763, MT6765, MT6768, MT6771, MT6779, MT6785, MT6833, MT6853, MT6873, MT6893
- For secure devices in preloader mode you must use appropriate vendor DA.
- MT2 package contain range of secure PRELOADER DA for vendor f.e. Tecno, Infinix, Vivo
It helps to service device over PRELOADER mode without Test-Point
- You can use own private Preloader DA with any vendor restrictions freely
Now over preloader with default range of service features you also got Bootloader unlock, RPMB, MemoryTool and other extended service stuff.
Solution tested and support on wide range of DA from 2017 up to 2023.
MT6755, MT6761, MT6765, MT6763, MT6771, MT6779, MT6768, MT6885, MT6853, MT6785, MT6873, MT6833, MT6893
Vivo: Y33s, Y30g, Y51, Y53s, Y19, Y5s, V17-Neo, S1-P65, Y7s, Y21a|V2149, V15|1819, S1|1907N, Y15s|V2120 and more.
- LUCI protocol updated
- RAPHAEL protocol updated
- META/SVE mode protocol management updated
Boot process:
- process flow updated
- process messages and error handling updated
- connection rebuild in BROM/PRELOADER mode
Service:
- Backup restore fixed in "restore all" mode
- Firmware Reader updated
- Bootloader unlock process updated (Xiaomi)
Flash Engine:
- UltraFlash protocol updated
Other changes:
- server protocols revised
- hardware compatibility engine updated
- software messages and hints updated
- minor ui changes
- many internal changes and improvements
Dongle firmware version required: 0156
Manual https://forum.infinity-box.com/viewtopic.php?t=27162
https://cdn.infinity-box.com/cm2mt2/...o-sec-2022.png
Download link #1
Download link #2
Download link #3
-
Infinity #CM2MT2 v2.48
Main:
- Vivo without test-point improved and support more flash chip types
- Boot process slightly updated
- [MDM Fix] option for security plugins, payjoy etc.
- [Orange State] operation revised
- Flash write config options updated
- Flash write process algo revised
- SCAT loader revised
Other changes:
- software messages and hints updated
- minor ui changes
- many internal changes and improvements
Download link #1
Download link #2
Download link #3
-
Infinity #CM2MT2 v2.49 - MDM Fix process updated and more
- [MDM Fix] file creation process rebuilded, more image types supported
- [MDM Fix] fast direct one click process released. Number of supported devices may be limited for now
Write your [MDM Fix] result HERE
- Meizu operations revised
- Xiaomi operations revised
- Server hints/loaders downloading method updated
- Firmware info extraction on [Identify] method updated
- Information about written images furing flash changed
- Retrieve MDM state on [Identify]
- Retrieve network options on [Identify]
- eMMC crc verification on boot
- Loaders updated
- Many internal changes and optimization applied
Before run #CM2MT2 v2.49 please fix your PC. Disable/Close TeamViewer, Anydesk, Ultraviewer, Ammyy Admin
And stop Services:
1. Right click on This PC => Manage => Services and Applications => Services => Double click to service
2. Click to [ Stop ] button
3. Select Manual and click to [ OK ]
Download link #1
Download link #2
Download link #3
-
Infinity #CM2MT2 v2.51
NOTE 1: Many new methods are being applied to the latest models. Consider to install this version to new directory and in case of any issue with old models use previously released software version for it.
NOTE 2: #CM2MT2 v2.51r1 has fixed gui issue with security values selection
CPU/Platforms:
LUCI: Protocol updated
LUCI: Vendor-specific changes
LUCI: RAMless support activated - RAMless DA must be used, automatic detection
LUCI: New SOC: MT6835 support activated
LUCI: New SOC: MT6985 support activated
More brands are covered in this update: Realme, Oppo, Tecno, Infinix, Lenovo, Moto
General changes:
- New loaders and boot method for Tecno/Infinix (without test point)
- New loaders and boot method for Vivo [luci] (without test point)
- New loaders and boot method for Realme [luci] (without test point)
- New loaders and boot method for Oppo [luci] (without test point)
- New loaders generic models base_v2316
- Loaders config for xioami updated
- Loaders storage tree updated to make easier selection
- Boot procedure updated
- Legacy devices (MT6580 and similar) connection process revised
- Supported CPU list updated: MT6835, MT6985
- MemoryTool filesystem detection method updated
- MemoryTool|RawTool updated
- MemoryTool messages updated
- MDM operations updated
- Device info parser updated
- Firmware analyzer updated
- EMMC hardware fault detection improved
- Server firmware verification method updated
- Startup Logs Analyzer added to [HW|SW reports]
- Format/Reset mode selection method changed, all operations rebuilded
- [Probe rpmb] option for [Identify]
- Filesystem(s) detection method updated
- gui changes
- Many internal changes and optimization applied
Download link #1 Download link #2
-
Infinity #CM2MT2 v2.52
- Boot procedure updated (BROM mode)
- More loaders included in package
- [Smart] Reset method updated
- vivo sec processing updated
- oppo regionlock via [Smart] Reset
- Display FRP status during [Identify]
- Firmware version detection method updated
- MemTool path selection method updated
- Reset FRP and Bootloader state options during flash write
- Needless firmware version check during flash write removed
- Legacy config parameters removed from [Settings]
- Database location changed to /cfg/ directory
- Minor gui changes
- Many internal changes and optimization applied
Download link #1 Download link #2
-
Infinity CM2SP3 v2.20r1 released, more SoC and 400+ new devices supported
Completely rebuilded CM2SP3 tool released with unique servicing methods and functions.
For now 400+ devices and number of SoC in list, unique hardware fault detection methods and special FireFly [FF] boot mode.
More features comes step-by-step
[A] acer, agm, alcatel, alldocube, archos
[B} benco, blackview, blu, bimax, bq
[C] chuwi, coolpad, cubot
[D] dexp, digma, doogee, doro
[F] foxdd, freeyond
[G] general-mobile, gionee
[H] headwolf, hiper, hisence, honor, hotwav, htc
[I] IIIF150, infinix, inoi, itel
[J] jumper
[K] kenxinda
[L] lava, lenovo, letv, lg
[M] meizu, micromax, motorola, myphone
[N] n-one
[O] oppo, oukitel
[P] panasonic, philips, phonemax, prestigio
[R] realme
[S] samsung, signma-mobile, sunwind
[T] tcl, teclast, tecno, topdevice, tp-link-neffos
[U] ulefone, umidigi, uniwa
[V] vastking
[W] wiko
[X] xgody, xiaolajiao, xiaomi
[Z] zte
SoC: T310, T606, T609, T612, T618, sc9230, sc9820, sc9832, sc9863
- [LiveBoot mode] activated: boot once, do what you want
- Standard FDL and custom FireFly [FF] loaders are supported
- External FDL1/FDL2 loaders support
- External PAC file as loader support
- Server authentication for number of operations available
- EXTCSD EMMC info extractor
- EMMC chip health status report to detect faulty EMMC
- HW|SW Report: extract startup logs/faults
- Device hardware and software info read on [Identify]
- Sensitive data [Device-ID] backup create on [Identify]
- Sensitive data [Device-ID] backup restore (own or with selection)
- [Device-ID] read/write [diag]
- [Device-ID] read [boot]
- WiFi MAC address read
- WiFi MAC address fix
- Bluetooth MAC address read
- Bluetooth MAC address fix
- [Disconnect] button to release device connection
- Reset frp
- Reset filesystem: userdata
- Reset filesystem: wipe
- [Smart] reset to fix ota and nvram issues
- PAC file information extractor
- Sound alert on critical errors during read/write
- Account status check
- Updates checker
- Progress display percent with decimal separator to be more precise
- Separate operation log file in /log/ directory for each session
- [Snap] button for instans software screenshot
Download link #1 Download link #2
-
Infinity #CM2SP3 v2.26 released
- Many new models in list
- SC7731e [FF] protocol released for advanced service options
- [RPMB Write] function in addition to previously released [RPMB Read]
- RPMB Smart Write enabled to optimize and make faster RPMB write process
- Filesystem parser (ext4) revised
- RPMB autobackup on Connect
- [Change Active Slot] option for [MemTool]
- [Device-ID] functions revised
- GPT parser revised
[AppTool] feature via [FF] mode
- Print list of available/installed APK
- Disable any (even system) APK pernamemntly
- Disabled APK stay disabled even after Reset or Wipe
- Save list of installed APK to file
- Restore disabled APK back anytime
- Extremely fast processing
NOTE: Bootloader must be unlocked for this operation
What [AppTool] can do:
- OTA On/Off
- MDM/Admin Apps On/Off
- Bloatware/Telemetry/Spy Apps On/Off
- Network/Operator addons On/Off
- And many more features depends on your fantasy
- Devices list updated with more models
- Built-in boot pack files updated
- Config options save/restore on startup
- Minor gui changes
- Internal improvements and fixes
HOW TO USE
Download link #1 Download link #2
-
Infinity #CM2MT2 v2.56 - [AppTool] feature, [MMC EOL Reset] and more
[AppTool] feature
- Print list of available/installed APK
- Disable any (even system) APK pernamemntly
- Disabled APK stay disabled even after Reset or Wipe
- Save list of installed APK to file
- Restore disabled APK back anytime
- Extremely fast processing
NOTE: Bootloader must be unlocked for this operation!
What [AppTool] can do:
- OTA On/Off
- MDM/Admin Apps On/Off
- Bloatware/Telemetry/Spy Apps On/Off
- Network/Operator addons On/Off
- And many more features depends on your fantasy
- Boot files selection method updated
- DA selection method updated
- [MemTool] gui changes
- [MemTool] functions rebuilded
- [MMC EOL Reset] function to attempt to extend faulty EMMC lifetime
- PSN Read/Write function released
- [MDM] method updated including infinix/tecno/itel handling
- BT/WiFi MAC addrees read method updated
- SCAT file load method changed, preloader become un-checked by default
- [Format/Reset] methods updated
- [Format/Reset] separate [Accounts] option released
- key.json generation for generic devices
- boot-pack integration method changed
- GUI changes
- Internal changes and optimizations
https://cdn.infinity-box.com/cm2sp3/sp3-apptool-b.png
Download link #1 Download link #2
-
Infinity #CM2MT2 v2.58 - MDM, PSN, [AppTool], [MemTool], [RawTool], boot-pack on Demand
- Firmware version detection method updated, process goes much faster
- Reboot On|Off option behaviour changed
- SoC/Model/DA Selector revised
- Connection process for completely erased devices changed
- [Identify] process updated for faulty units better detection
- Flasher/SCAT loader menu updated
- [RawTool] rebuilded
- [AppTool] menu updated with Find First/Last/Next/Previous options
- [boot-pack] On Demand Downloader:
Offline boot-pack installation is not required
DA/Auth/Preloader files loaded from server on model selection via [Get boot files]
- [MDM File] option removed as useless
- [MDM] process rebuilded, it works without account/username
- Backup engine and process rebuilded
- PSN REad/Write method updated
- GUI changes
- Internal changes and optimizations
How to Reset MDM
How to get DA without boot-pack installation
How to use [AppTool]
How to make [MMC EOL Reset]
Download link #1 Download link #2