[Thảo luận] 2 em S5230 repair ok mà vẫn mất boot!

2 em S5230 repair ok mà vẫn mất boot!

Please connect the target device and power it on...
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
MI: Medusa JTAG init failed.
ERROR[035]: Target device has been powered off during connect.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 07926F0F, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 3.2 V
CPU : Broadcom BCM2133
Core ID : 07926F0F
ERROR[002]: Failed to load Medusa Device Server to target RAM.
ERROR[035]: Target device has been powered off during connect.
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 07926F0F, IR Length = 4.
ERROR[000]: Unable to halt core.
Please connect the target device and power it on...
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
MI: Medusa JTAG init failed.
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 07926F0F, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 3.2 V
CPU : Broadcom BCM2133
Core ID : 07926F0F
Flash device: Micron 256Mb
Flash ID : 002C55BA
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 2048
Flash size : 256 Mb
Write protection disabled.
Opening "C:\Program Files\GsmServer\Medusa\Firmware\SAMSUNG_GTS5230_Re pair.mf" file...
Writting BOOT section. Please wait... Done
Writting UPCH section. Please wait... Done
Repairing IMEI... Done
Disconnected
Repair done.
Em thứ 2

ERROR[035]: Target device has been powered off during connect.
Please connect the target device and power it on...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
MI: Medusa JTAG init failed.
ERROR[035]: Target device has been powered off during connect.
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
MI: Medusa JTAG init failed.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
MI: Medusa JTAG init failed.
ERROR[035]: Target device has been powered off during connect.
Please connect the target device and power it on...
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
MI: Medusa JTAG init failed.
ERROR[035]: Target device has been powered off during connect.
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
MI: Medusa JTAG init failed.
ERROR[035]: Target device has been powered off during connect.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
MI: Medusa JTAG init failed.
ERROR[035]: Target device has been powered off during connect.
Please connect the target device and power it on...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
MI: Medusa JTAG init failed.
ERROR[035]: Target device has been powered off during connect.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
MI: Medusa JTAG init failed.
ERROR[035]: Target device has been powered off during connect.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 07926F0F, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 2.0 V
CPU : Broadcom BCM2133
Core ID : 07926F0F
ERROR[004]: Medusa Device Server did not replied to HELLO command.
ERROR[035]: Target device has been powered off during connect.
Please connect the target device and power it on...
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 07926F0F, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 3.1 V
CPU : Broadcom BCM2133
Core ID : 07926F0F
Flash device: Micron 256Mb
Flash ID : 002C55BA
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 2048
Flash size : 256 Mb
Write protection disabled.
Opening "C:\Program Files\GsmServer\Medusa\Firmware\SAMSUNG_GTS5230_Re pair.mf" file...
Writting BOOT section. Please wait... Done
Writting UPCH section. Please wait... Done
Repairing IMEI... Done
Disconnected
Repair done.

Có cao thủ nào ghé qua xem giúp em chút!

lôi cái z3x cùi ra múc thủ đi anh,nhiêu lúc dùng dao mổ to quá nên mổ không ngon

có HWK múc thử mod. mình dính 2 con 5233 repair hwk done hết.cần file boot ,với lại xem file boot chuẩn nửa nhé.

Thử file boot này nhé : http://www.mediafire.com/?7a5eb5nirkpd6kd

file boot thì chắc không phải đâu. cảm ơn đã chia sẻ.

S5230 nhầm !chính là S5230M

Flash device: Micron 256Mb
Bạn chọn file S5230M và repair S5230M mới đúng.Đã tested