[Thảo luận] 2 em S5230 repair ok mà vẫn mất boot!

[Bach Diep]

Please connect the target device and power it on...
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
MI: Medusa JTAG init failed.
ERROR[035]: Target device has been powered off during connect.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 07926F0F, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 3.2 V
CPU : Broadcom BCM2133
Core ID : 07926F0F
ERROR[002]: Failed to load Medusa Device Server to target RAM.
ERROR[035]: Target device has been powered off during connect.
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 07926F0F, IR Length = 4.
ERROR[000]: Unable to halt core.
Please connect the target device and power it on...
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
MI: Medusa JTAG init failed.
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 07926F0F, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 3.2 V
CPU : Broadcom BCM2133
Core ID : 07926F0F
Flash device: Micron 256Mb
Flash ID : 002C55BA
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 2048
Flash size : 256 Mb
Write protection disabled.
Opening "C:\Program Files\GsmServer\Medusa\Firmware\SAMSUNG_GTS5230_Re pair.mf" file...
Writting BOOT section. Please wait... Done
Writting UPCH section. Please wait... Done
Repairing IMEI... Done
Disconnected
Repair done.
Em thứ 2

ERROR[035]: Target device has been powered off during connect.
Please connect the target device and power it on...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
MI: Medusa JTAG init failed.
ERROR[035]: Target device has been powered off during connect.
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
MI: Medusa JTAG init failed.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
MI: Medusa JTAG init failed.
ERROR[035]: Target device has been powered off during connect.
Please connect the target device and power it on...
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
MI: Medusa JTAG init failed.
ERROR[035]: Target device has been powered off during connect.
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
MI: Medusa JTAG init failed.
ERROR[035]: Target device has been powered off during connect.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
MI: Medusa JTAG init failed.
ERROR[035]: Target device has been powered off during connect.
Please connect the target device and power it on...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
MI: Medusa JTAG init failed.
ERROR[035]: Target device has been powered off during connect.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
MI: Medusa JTAG init failed.
ERROR[035]: Target device has been powered off during connect.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 07926F0F, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 2.0 V
CPU : Broadcom BCM2133
Core ID : 07926F0F
ERROR[004]: Medusa Device Server did not replied to HELLO command.
ERROR[035]: Target device has been powered off during connect.
Please connect the target device and power it on...
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 07926F0F, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 3.1 V
CPU : Broadcom BCM2133
Core ID : 07926F0F
Flash device: Micron 256Mb
Flash ID : 002C55BA
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 2048
Flash size : 256 Mb
Write protection disabled.
Opening "C:\Program Files\GsmServer\Medusa\Firmware\SAMSUNG_GTS5230_Re pair.mf" file...
Writting BOOT section. Please wait... Done
Writting UPCH section. Please wait... Done
Repairing IMEI... Done
Disconnected
Repair done.

[Bach Diep]

Có cao thủ nào ghé qua xem giúp em chút!

[thanhcong mobile]

lôi cái z3x cùi ra múc thủ đi anh,nhiêu lúc dùng dao mổ to quá nên mổ không ngon

[BinhMinhGSM]

có HWK múc thử mod. mình dính 2 con 5233 repair hwk done hết.cần file boot ,với lại xem file boot chuẩn nửa nhé.

Thử file boot này nhé : http://www.mediafire.com/?7a5eb5nirkpd6kd

[Bach Diep]

file boot thì chắc không phải đâu. cảm ơn đã chia sẻ.

[angiangmobile]

Flash device: Micron 256Mb
Bạn chọn file S5230M và repair S5230M mới đúng.Đã tested