Setool New Update AE Post ở đây
Setool New Update AE Post ở đây
SEtool News 05/12/2010
due to upcoming holidays we decreased full unlock,unlock via codes credits consumption for ODM phones:
- locosto-based S1 phones (ODM phones) 4 credits
- STEricsson-based S1 phones (w100,w150...) 4 credits
- neptune-based S1 phones (ODM phones) 4 credits
that is temporary, of course.
Download HereCode:- updated loaders for few phone models
- general bugfixes
- few minor interface improvements
Br
Faisal_Computer
SETOOL UPDATE v1.101
Trích:
- ancient bug (from very start of s1 patch unlock )with patch unlock of z250 was fixed.
- updated loaders for few phone models
- few minor internal changed
DOWNLOAD HERE
Link.Code:- CCPU reset procedure could fail on some DB200X-based PDA phones, fixed.
- A2 loaders for SEMC phones updated to current versions
Br
XcachorroX
v1.104
Code:
- fixed script processing for SEMC A2 phones with damaged filesystem
Rapidshare Link
Greetings.
today we enabled s1 v2 signatures for public in testing mode.
check credit consumtion table in setoolforum for prices.
that means, setool2 users with sufficient credits amount can unlock from network x10,e10,e15,m1,u20,w100,w150 phones, despite of codes attempt counter.
because of price, i'm strongly recommend to use unlock via codes for w100,w150 phones
v1.105
Rapidshare LinkCode:- added support for qc8255-based semc phones (arc,neo,play)
v1.106
Download hereCode:- generic customization for A1,A2 phones, custpack info was broken, fixed
- old batch of smartcards was ignored, fixed
Setool V1.107
Trích:
- gemalto TOP cards supported from now on
- SmartCard update required to use that and following setool2 versions
Se tool testing version v1.1094 ( x10i,x10a,so-01b)
anybody with locked or not locked x10i,x10a,so-01b, please come here.
Greetings.
lets make some tests.
1.
make sure your x10i,x10a have standard semc android 2.1 firmware.
if not, flash such firmware.
2.
go to
menu->settings->applications->development->enable usb debugging, check it.
install "adb drivers" ( drivers\adb_drivers\x10_drivers )
3.
power off phone.
go to pda tab, select x10 as model, on options check "signed mode,altbypass mode,do full unlock instead usercode reset", fill any valid username/password.
press unlock.
when prompted detach phone, turn it on fully, connect it again.
( or you can leave phone on cable, then power it on manually )
DO NOT DETACH PHONE FROM AFTER PROCEDURE STARTED, YOU CAN KILL YOUR PHONE, ONLY RIFF JTAG WILL HELP
DO NOT REMOVE BATTERY FROM PHONE AFTER PROCEDURE STARTED, YOU CAN KILL YOUR PHONE, ONLY RIFF JTAG WILL HELP
https://rapidshare.com/files/573768306/v1.1094.rar
please take in account, that it is testing version, it works for my x10, however, we should test it on other phones.
( during testing period, 0 credits required to unlock x10i using altbypass method. )
originally posted by
the_laser
br.DYNET
SETOoL v1.1094; 11/JULY/2011
v1.1094
- finally sorted all issues with samsung cid26 emp-based phones.
- added x10i,x10a,so-01b unlock using alternative security bypass. check FAQ post for all details.
during promo period, cost is 0 ( zero ) credits. Promo period can be extended to forever.
- support area can only be access from now on by using setool2 >= v1.1094
- fixed many minor and major bugs.
Download LINK: https://rapidshare.com/#!download|13...C3E7F08390BD39
DISCUSSIONS: SETOoL v1.1094; 11/JULY/2011
Br
HASSAN
MABROUK-GSM
UGANDA
News SETOOL x10i,x10a
be content to know, that we plan to finish promo period for x10i,x10a altbypass unlock at monday, 18.11.2011.
after that, price for x10i,x10a altbypass unlock will be 4 credits.
ps.
if "evil competitors" will do stupid steps, promo will be extended.
__________
XcachorroX
SETool Update: anybody with locked or not locked e10,e15,e16,u20 please come here
Greetings.
Let's make some tests.
1.
download setool2 v1.1099
https://rapidshare.com/files/3246771165/v1.1099.rar
2.
make sure you have firmware with android 2.x, NOT 1.6.
flash required firmware, if needed.
3.
power on phone without sim card, go to menu->settings->applications->development, enable "usb debugging"
connect phone to PC, install drivers from setool2 v1.1099 distr ( drivers\ADB_Drivers)
hint:
i suggest to import DisableADBNumbering.reg, however that is not required.
4.
select proper phone model.
on settings check signed mode, use alternative security bypass, do full unlock instead usercode reset
press unlock
follow program directions.
hint:
when program tells "warming up...", manually power on phone fully, cause it will automatically enter charging mode.
after you see "GETTING ROOT ACCESS ..." DO NOT TOUCH PHONE until procedure complete.
it can happen ( very unlikely, though ) that ADB server will not recognize phone after reboot, so
IF phone not detecting automatically and on status bar you can see "waiting for phone...", again - only in that case - disconnect phone from usb and connect it again, procedure should continue.
if not, well, repeat from start.
5.
during testing period procedure will be free, however testing period will be very short ( until i wake up ) and credits will be taken after that,depending on testing results.
we tested service thoroughly and all went fine, but... well, you got idea.
no any warranty, your phone can be killed,etc,etc,etc.
originally posted by
the_laser
Regards
Dynet
SEtool v1.1099 is out!
- added e10,e15,e16,u20 unlock using alternative security bypass. price 4 credits.
Download
BR
Setool v1.1101 released
Code:
- added lt15,mt15,r800 (and other semc models based on MSM8255) unlock using alternative security bypass.
check FAQ post for all details.
procedure require internet access and paid.
- added pnx4910-based phones support (ck15_txt_pro at the moment).
supported all standard operations, network unlock, as usual, will only work when s1 signature server will work.
- fixed ancient bug with lg3g testpoint operations http://forum.gsmhosting.com/ubb/wink.gif
SETOOL2 SMARTCARD UPDATE REQUIRED, ONLY IF YOU STILL NOT DONE IT.
Download link
https://rapidshare.com/files/14968260/v1.1101.rar
Wbr
SEtool2 v1.1102 Beta test !!
SEtool2 v1.1102 Beta test !!.
Whats new
https://rapidshare.com/#!download|65...40|v1.1102.rarCode:SEtool2 v1.1102 repair phone recovery empty semcboot area.
SE-Tool v1.1104 added unlock code request by IMEI
v1.1104
SETOOL2 SMARTCARD UPDATE REQUIRED, ONLY IF YOU STILL NOT DONE IT.Trích:
- added unlock code request by IMEI.
request cost - 10 credits, turnaround maximum 3 days.
how to do:
go to LOCKS tab, fill IMEI, press "REQUEST" button.
after ~1 day, check if request done: again fill IMEI and press request.
if code will not be ready in 72 hours from request, credits will be automatically returned to account,
when user check credits information.
Download here
BR!
F@RUK S.
Setool New Update v1.1106 out
Trích:
- improved semcboot recovery for 8x55-based phones.
- implemented script operations, format trim area operations, dump flash operations for 8x55 phones using
alternative security bypass method. That allow fix phones with damaged trim area and many other interesting features.
- simplified 8x55-based phones unlock, now need connect phone one time only.
Download
__________
Của anh bị lỗi rồi bổ sung thêm nè: v1.1106.rar - 4shared.com - chia sẻ và lưu trữ - tải xuống tập tin trực tuyếnTrích:
Được post bởi ht_mobile90
Setool News (v1.1106)
please re download v1.1106 from support area or from https://rapidshare.com/files/983692499/v1.1106.rar: due to hurry, 8x55 unlock was broken.
SETool Update NEWS v1.1107
Code:again improved recovery for 8x55-based phones.
recovery of phones with totally damaged both semcboot and trim area properly supported now.
download
Download: v1.1107.rar (0.00 MB) link die rồi anh ơi.
Đây bạn
Download
SETOOL v1.1108
- from now on, unlock by altbypass method for qsd8250,msm7227 phones will also "unlock" semcboot.
- qsd8250,msm7227 phones with "unlocked" bootloader can flash custom firmwares now
- added few models to model list, so users don't get confused
- different bugfixes, some are important.
https://rapidshare.com/files/604944196/v1.1108.rar
setool v1.1201
- resurrection procedure will now work for totally erased s1 qualcomm-based phones FAQ now have resurrection procedure example. - forgot to post, that starting from v1.12 setool2 will check for faulty cypress-based reader and refuse to run, if setool2 smartcard installed in such reader. There is no any workaround. Use om****y-based reader or other normal reader.
https://rapidshare.com/files/3307035856/v1.1201.rar
Br
Faisal_Computer
28-10-2011, SETOOL-extremely important message !!!
extremely important message !!! BY Laser
UPDATECode:seems most of lately produced msm7227-based phones have chipset with FIXED security hole, which used to altbypass unlock.
( that is not 100% confirmed, we only have few reports, however better be warned )
such phones will DIE after successful unlock procedure.
such dead phones CAN NOT be recovered. ( perhaps, jtag can fix that, perhaps, qualcomm fixed jtag security hole too )
there is NO WAY to determine if phone has fixed chipset or chipset with security hole.
the ONLY safe way is to use unlock by resurrection cables.
if phone can be connected and booted by resurrection cables, phone is safe to unlock.
if phone can not be booted by resurrection cables, phone has fixed chipset and could not be unlocked.
you have been warned.
get and use resurrection cables.
BRTrích:
e16 phone with manufacture date 11w38 affected, i think we should care about phones which produced after 11w26
HASSAN
MABROUK-GSM
UGANDA
v1.1202
RapidShare LinkCode:- no testpoint altbypass unlock procedure will work now for msm7227-based phones,which using MCUs with fixed security bug.
resurrection cables will NOT work for MCUs with fixed security bug. Because of this,
phones, which are already dead should be recovered using jtag box, which can write ORIGINAL semc boot.
big thanks for help and testing to electrolandgsm.
- switch to usb interface was broken for DB200x phones, fixed.
- added few models to list, so users can use profiles for them.
v1.1202
- no testpoint altbypass unlock procedure will work now for msm7227-based phones,which using MCUs with fixed security bug. resurrection cables will NOT work for MCUs with fixed security bug. Because of this, phones, which are already dead should be recovered using jtag box, which can write ORIGINAL semc boot. big thanks for help and testing to electrolandgsm. - switch to usb interface was broken for DB200x phones, fixed. - added few models to list, so users can use profiles for them.:mn:
link download
v1.1203
-testpoint altbypass method will work now for msm7227-based phones,which using MCUs with fixed security bug.
that means, resurrection cables will work for MCUs with fixed security bug.
- fixed problem with FOTA upgrade for msm8x55-based phones, unlocked by altbypass
Download
https://rapidshare.com/files/3023120365/v1.1203.rar
24-12-2011 original post here >>>
HTML Code:Starting from 25.12.2011 cost of unlock procedure, using alternative security bypass for semc phones,
based on msm7227,qsd8250,qsd8x55 chipsets will be 0 ( zero ) credits.
Such terms will be in effect until another announcement.
SETool news:credits consumption
SETool news: Starting from 03.01.2012 cost of unlock procedure, using alternative security bypass for semc phones,
based on msm7227,qsd8250,qsd8x55 chipsets will be 2 ( two ) credits.
We will watch closely on market situation with semc qualcomm solution and react correspondingly.
v1.1204
RapidShare LinkCode:- fixed "dead phone after unlock" for some latest j20 phones.
- x10 with android firmware 2.3.3 supported for altbypass unlock
- msm8x60 sony phones supported ( lt26,lt28,is12s,so-03d ). Standard operations supported - flash,trim area read/write.
Network unlock only supported using s1 signature server, which is offline for us.
- added support for one interesting activation.
SETool standalone unlock for qualcomm-based semc phones released for v1.1204 software.
After smartcard update, setool2 no more require internet connection or any credits to unlock any qualcomm-based semc phone. All settings and procedures are same as usual, but internet connection no more required, if card is updated. SEMC qualcomm-based phones, which supported by altbypass are:
Smartcard update required.Code:
WT18,LT15a,LT15at,LT15i,E15a,E15i,MT15a,MT15i,WT18i,Z1i,
IS07,IS11S,ST18a,ST18i,MK16a,MK16i,ST17a,ST17i,SK17a,
SK17i,X10a,X10i ST15a,ST15i,MT11a,MT11i,SO-01B,SO-02C,
SO-01C,U20a,U20i,E10a,E10i,E16a,E16i,WT19a,WT19i,LT18a,
LT18i,R800a,R800at,R800i,R800x
Cost 20 SEtool credits.
more info:
UPDATES AND NEWS - Page 24
update procedure:
Setool2 Card Update, Information, TroubleShooting [ READ FIRST POST ]
KEEP ENJOY SETOOL-ing!
NOTE 1:
LGTool will be automatically uploaded and activated during setool2 smartcard update procedure. You do not need to do anything.
NOTE 2:
Amnesty for old not activated setool customers - for this update it is DOES NOT matter, if card was already activated or updated to work with >1.107 version.
v1.1280
due to major core rewrite, some bugs can appear in a1 phone service patterns, despite i checked all supported phones in different modes.Code:- fixed m1_aspen flashing
- fixed flashing of ICS firmwares for 8x55 phones
- removed java-based altbypass method for all a1 phones,except pnx5230-based phones.
- reset-based unlock method is now standard altbypass unlock method for a1 phones.
you can not use usb as interface for altbypass unlock on db2000,db2010-based phones anymore.
you do not need restoration files,bypass files ( still need them for pnx5230-based phone ).
and ... altbypass unlock is much quicker and quite "one-buttoned" now ;)
- added x1 unlock via codes, all you need - enter IMEI on locks tab and press "request". Cost is 1 credit.
if you will find problems, feel free to report them on forum.
RapidShare Link
- added quite complex, but working procedure to unlock last SEMC A2 phone, j108 cedar from network locks.
beginners, stay away from this procedure.
other users, welcome to faq for details. http://support.setool.net/showthread...ll=1#post83068
- STE U8500 sony phones supported ( lt22,mt26,st25 ). Standard operations supported - flash,trim area read/write.
Network unlock only supported using s1 signature server, which is offline for us.
STE U8500 support was done blindly, should work, but need to be tested.
https://rapidshare.com/files/2176817692/v1.1285.rar
Successfully unlocked J108 Sony Ericsson J108 Unlock done With Setool.......
J108 unlock done. 3 credits used
Code:current updater version: 0.95
current setool2 version: 1.1285
SERVER CREDITS LEFT/USED: 50/190
CARD COUNTERS: FLASH 193, UNLOCK 272
Elapsed: 7 secs.
SIGNED MODE (USING SERVER)
CFG:100000000000
ChipID: F100, EMP protocol: 0401
PHONE DOMAIN: "RETAIL"
PHONE CID: 0081
OTP LOCKED: 1 CID: 81 PAF: 1 IMEI: 01248500 CERT: RED
LDR: 2010-03-02 18:05 1212-4656_DB3350_CS_LOADER_ACC_SDRAM_R2A096
LDR: 2010-03-02 18:06 1212-4655_DB3350_CS_LOADER_APP_SDRAM_R2A096
Model (from GDFS): J108i
MAPP CXC article: R7DA052 prg1239-0181_HUTCHISON_HO
MAPP CXC version: R7DA052
Language Package: HUTCH-WORLD
CDA article: 1241-3443
CDA version: R6A
Default article: 1239-0196
Default version: R7DA052
PROVIDER: 272-05
Network LOCKED
SECURITY UNITS BACKUP CREATED.
Elapsed: 18 secs.
SIGNED MODE (USING SERVER)
CFG:101000000000
ChipID: F100, EMP protocol: 0401
PHONE DOMAIN: "RETAIL"
PHONE CID: 0081
OTP LOCKED: 1 CID: 81 PAF: 1 IMEI: 01248500 CERT: RED
LDR: 2010-03-02 18:05 1212-4656_DB3350_CS_LOADER_ACC_SDRAM_R2A096
LDR CAPS: SYSTEM FLASH SIGNATURE AUTH
LDR: 2010-03-02 18:06 1212-4655_DB3350_CS_LOADER_APP_SDRAM_R2A096
LDR CAPS: SYSTEM FLASH GDFS FILESYSTEM TA
writing "C:\Documents and Settings\vp\My Documents\GSM\Sony Ericsson\Setool\Setool SE J108\R7EA011.APP_SW_1239_0125_GENERIC_HO_REDBROWNBLUE_CID81_80_53_52_49_DB3350.SOFTWARE"
ALLOWED DOMAINS: BLUE BROWN RED
MAXIMUM CID: 81
Will flash 1009 blocks ...
ssw file accepted
writing "C:\Documents and Settings\vp\My Documents\GSM\Sony Ericsson\Setool\Setool SE J108\R7EA011.FS_BALTIC_HO_REDBROWNBLUE_CID81_80_53_52_49.SOFTWARE"
ALLOWED DOMAINS: BLUE BROWN RED
MAXIMUM CID: 81
Will flash 2161 blocks ...
ssw file accepted
using GENERIC phone customization
tpa/preset/custom/CONTENT_DOWNLOAD_HOOK.itm
tpa/preset/custom/FM_PICTURES_HOOK_3.itm
tpa/preset/custom/FM_SOUNDS_HOOK_3.itm
tpa/preset/custom/FM_THEMES_HOOK_3.itm
tpa/preset/custom/FM_VIDEOS_HOOK_3.itm
tpa/preset/custom/GAMES_HOOK_3.itm
tpa/preset/custom/MC_MUSIC_HOOK_3.itm
tpa/preset/custom/MC_PHOTO_HOOK_3.itm
tpa/preset/custom/MC_VIDEO_HOOK_3.itm
tpa/preset/custom/ORG_APPLICATIONS_HOOK_3.itm
tpa/preset/custom/preloaded_config.xml
tpa/preset/custom/SETT_RINGTONE_HOOK_1.itm
tpa/preset/custom/SETT_SCREENSAVER_HOOK_1.itm
tpa/preset/custom/SETT_STARTSHOW_HOOK_1.itm
tpa/preset/custom/SETT_WALLPAPER_HOOK_1.itm
tpa/preset/custom/Customize.xml
Elapsed: 402 secs.
SIGNED MODE (USING SERVER)
CFG:101000000000
SERVER CREDITS LEFT/USED: 50/190
CARD COUNTERS: FLASH 194, UNLOCK 272
Elapsed: 2 secs.
SIGNED MODE (USING SERVER)
CFG:101000000000
ChipID: F100, EMP protocol: 0401
PHONE DOMAIN: "RETAIL"
PHONE CID: 0081
OTP LOCKED: 1 CID: 81 PAF: 1 IMEI: 01248500 CERT: RED
LDR: 2010-03-02 18:05 1212-4656_DB3350_CS_LOADER_ACC_SDRAM_R2A096
LDR: 2010-03-02 18:06 1212-4655_DB3350_CS_LOADER_APP_SDRAM_R2A096
Insert Memory CARD into phone
Insert TEST SIM CARD into phone
POWER ON phone
After setup complete, POWER OFF phone
Then proceed to Step 2
Elapsed: 40 secs.
SIGNED MODE (USING SERVER)
CFG:101000000000
ChipID: F100, EMP protocol: 0401
PHONE DOMAIN: "RETAIL"
PHONE CID: 0081
OTP LOCKED: 1 CID: 81 PAF: 1 IMEI: 0124850 CERT: RED
LDR: 2010-03-02 18:05 1212-4656_DB3350_CS_LOADER_ACC_SDRAM_R2A096
LDR: 2010-03-02 18:06 1212-4655_DB3350_CS_LOADER_APP_SDRAM_R2A096
Insert Memory CARD into phone
Insert TEST SIM CARD into phone
POWER ON phone
After setup complete, POWER OFF phone
Then proceed to Step 2
Elapsed: 16 secs.
SIGNED MODE (USING SERVER)
CFG:101000000000
ChipID: F100, EMP protocol: 0401
PHONE DOMAIN: "RETAIL"
PHONE CID: 0081
OTP LOCKED: 1 CID: 81 PAF: 1 IMEI: 01248500 CERT: RED
LDR: 2010-03-02 18:05 1212-4656_DB3350_CS_LOADER_ACC_SDRAM_R2A096
LDR: 2010-03-02 18:06 1212-4655_DB3350_CS_LOADER_APP_SDRAM_R2A096
Insert Memory CARD into phone
Insert TEST SIM CARD into phone
POWER ON phone
Set "USB MODE" in phone settings to "File transfer"
Copy file from card folder other\executor.b to :
C:\Documents and Settings\vp\Desktop\GSM\Sony Ericsson\Setool\v1.1285\backup\01248500
POWER OFF phone
Then proceed to Step 3
Elapsed: 13 secs.
SIGNED MODE (USING SERVER)
CFG:101000000000
ChipID: F100, EMP protocol: 0401
PHONE DOMAIN: "RETAIL"
PHONE CID: 0081
OTP LOCKED: 1 CID: 81 PAF: 1 IMEI: 01248500 CERT: RED
Checking for signature ...
Waiting for calculation process ...
RESPONSE: "SUCCESS" [1038]
LDR: 2010-03-02 18:05 1212-4656_DB3350_CS_LOADER_ACC_SDRAM_R2A096
LDR: 2010-03-02 18:06 1212-4655_DB3350_CS_LOADER_APP_SDRAM_R2A096
DISCONNECT PHONE NOW
INSERT SIM CARD, FULLY TURN PHONE ON AND ATTACH AGAIN
INSTALL PHONE MODEM DRIVERS IF NEEDED
SEARCHING FOR PHONE, "STOP" TO ABORT
PHONE FOUND AT COM170
PHONE READY TO PROCEED
EXECUTOR STARTED
SEARCHING FOR PHONE, "STOP" TO ABORT
PHONE FOUND AT COM170
PHONE READY TO PROCEED.
GOT SEED: 00A04187
ACTIVATION COMPLETED. USERCODE RESET TO "0000"
DO NOT DISCONNECT PHONE FROM CABLE
UNTIL PHONE TURNS ON BY ITSELF
Elapsed: 199 secs.
SIGNED MODE (USING SERVER)
CFG:101000000000
SERVER CREDITS LEFT/USED: 47/193
CARD COUNTERS: FLASH 194, UNLOCK 272
Elapsed: 2 secs.
v1.1286
- added quite complex, but working procedure to unlock last SEMC A2 phone, j108 cedar from network locks.
beginners, stay away from this procedure.
other users, welcome to faq for details.
- STE U8500 sony phones supported ( lt22,mt26,st25 ). Standard operations supported - flash,trim area read/write.
Network unlock only supported using s1 signature server, which is offline for us.
STE U8500 support was done blindly, should work, but need to be tested.
RapidShare Link
Download hereCode:- fixed unlock problems with some sharp 3g phones.
- added secunits backup during j108 bypass procedure
- misc cosmetic changes