RIFF JTAG – Samsung GT-S7562 Galaxy S Duos Unbrick

22.01.2013 RIFF JTAG – Samsung GT-S7562 Galaxy S Duos Unbrick – Dead Boot repair supported
Repairing bricked Samsung S7562 is easy with the RIFF Box.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on, so no need to press any power-on buttons on the phone keypad.
To resurrect Samsung S7562:
Solder JTAG cable to Samsung S7562 JTAG pads;

Insert USB Data cable into board and PC;

Make sure Samsung S7562 is selected in the list of models;

Click Resurrect button;

Wait till software signals a successful operation completion;

Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:
Disconnect PC cable;

Insert battery;

Hold ‘Volume Down’ and ‘Home’ keys and press Power-On.

.
http://www.jtagbox.com/wp-content/up...duos_front.jpg