22.01.2013 RIFF JTAG – Samsung GT-S7562 Galaxy S Duos Unbrick – Dead Boot repair supported
Repairing bricked Samsung S7562 is easy with the RIFF Box.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on, so no need to press any power-on buttons on the phone keypad.
To resurrect Samsung S7562:
  • Solder JTAG cable to Samsung S7562 JTAG pads;
  • Insert USB Data cable into board and PC;
  • Make sure Samsung S7562 is selected in the list of models;
  • Click Resurrect button;
  • Wait till software signals a successful operation completion;
  • Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:
  • Disconnect PC cable;
  • Insert battery;
  • Hold ‘Volume Down’ and ‘Home’ keys and press Power-On.
.