[Chia sẻ] samsung i9500 SPD6820 format ok

Thông tin trong máy ghi samsung i9500, trên team ghi i950B treo logo format done!

Code:

Volcano Updated: 2014-02-20 Connecting... Connection successful,connected state! Version: V3.8 SN:122-742-164 Port:COM5 After format or Flash you have to press & hold power button for at least 1.30 mins. Note for win7 users : Start your Win 7 64bit with F8 key and choose *Disable Driver Signature Enforcement*. After that the spd drivers will have the ability to be loaded. For many phones, charge pins need to be set in order to identify USB devices. Vcc: null Gnd: 5 Analyzing D+ and D-... D+ = 3, D- = 2 Detection D+/D- with 12.17 seconds. Continue to detect BOOT pin... Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00) UsbVcc(VCC) = 1 10, BOOT(Pull Down) = 4 Setting... Find USB device:SPRD U2S Diag (COM7), (VID_1782&PID_4D00) Pinouts setting complete! Internal version: SPRD3 Boot downloaded. Start boot please wait a moment.... Spreadtrum Boot Block version 1.1 Boot downloaded. Flash ID: 002C00BC90555600 Flash Type:[Micron] MT29C4G48MAZAPAKD FLASH LEN:0x20000000 mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjaluna),10m(modem),3840k(fixnv),3840k(backupfixnv),5120k(dsp),3840k(runtimenv),10m(boot),10m(recovery),200m(system),180m(userdata),60m(cache),256k(misc),1m(boot_logo),1m(fastboot_logo),3840k(productinfo),512k(kpanic),512k(simlock),10m(intmemory) Analysis flash internal data successfully. >>Set to Factory successfully.