[Chia sẻ] samsung i9500 SPD6820 format ok

[TuệNguyễn]

Thông tin trong máy ghi samsung i9500, trên team ghi i950B treo logo format done!

Volcano Updated: 2014-02-20
  Connecting...
  Connection successful,connected state!
  Version: V3.8
  SN:122-742-164
  Port:COM5
  After format or Flash you have to press & hold power button for at least 1.30 mins.
  Note for win7 users :
  Start your Win 7 64bit with F8 key and choose *Disable Driver Signature Enforcement*.
  After that the spd drivers will have the ability to be loaded.
  For many phones, charge pins need to be set in order to identify USB devices.
  Vcc: null
  Gnd: 5
  Analyzing D+ and D-...
  D+ = 3, D- = 2
  Detection D+/D- with 12.17 seconds.
  Continue to detect BOOT pin...
  Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
  UsbVcc(VCC) = 1 10, BOOT(Pull Down) = 4
  Setting...
  Find USB device:SPRD U2S Diag (COM7), (VID_1782&PID_4D00)
  Pinouts setting complete!
    
  Internal version: SPRD3
  Boot downloaded.
  Start boot please wait a moment....
  Spreadtrum Boot Block version 1.1
  Boot downloaded.
  Flash ID: 002C00BC90555600
  Flash Type:[Micron] MT29C4G48MAZAPAKD
  FLASH LEN:0x20000000
    mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjaluna),10m(modem),3840k(fixnv),3840k(backupfixnv),5120k(dsp),3840k(runtimenv),10m(boot),10m(recovery),200m(system),180m(userdata),60m(cache),256k(misc),1m(boot_logo),1m(fastboot_logo),3840k(productinfo),512k(kpanic),512k(simlock),10m(intmemory)
  Analysis flash internal data successfully.
>>Set to Factory successfully.