mình mới mua box về nên chưa biết cài, anh em nào đã cài và sử dụng ok xin chỉ giáo cho mình học hỏi với :) thanks anh em
mình mới mua box về nên chưa biết cài, anh em nào đã cài và sử dụng ok xin chỉ giáo cho mình học hỏi với :) thanks anh em
e cũng thế.ko lập đc bài mới nên viết ở đây.xin các bác hướng dẫn cho cách sử dụng cơ bản của easy jtag box ạ.e cảm ơn.
load về setup là ok
http://cp.z3x-team.com/static/latest_shell.exe
bác có thể nói qua cách làm boot cho dòng máy samsung đc ko ạ.vd máy g355h chẳng hạn.e chưa biết bắt đầu từ đâu.cảm ơn bác!
xin các bác xem giúp ạ
EasyJtag Suite Classic ver.: 2.5.0.8 / wxWidgets 3.1.0-W-U started.
OS ver.: Windows 7 (build 7600). Admin rights OK
undefined
Android Explorer ver.: 1.0.0.23
eMMC ODIN ver.: 1.0.11.2
Successfully connected to box on COM10
Box S/N: 02002018C5B6AEE7, ,FW Ver.: 01.58
Box Working Mode: JTAG Box.
Box Drivers version: 3.0.1.0, are OK
Z3X Card Serial : AA01-3EE1 , ver: 22
Z3X Card Activation [LG] : NOT ACTIVATED
Z3X Card Activation [SAMS] : NOT ACTIVATED
Z3X Card Activation [JTAG] : ACTIVATED
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 1800 mV
Box S/N: 02002018C5B6AEE7, ,FW Ver.: 01.58
CMD Pullup Level:1722 mV
CMD Active Level:1773 mV
Box IO Level:1800 mV
CLK Rate:14000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 90014A4834473262110106B70C305284
EMMC CSD : D07F01320F5903FFFFFFFFEF8A4040DA
EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 05/2015 Rev.0x1
EMMC NAME: H4G2b , S/N: 112659504
EMMC NAME (HEX): 48344732622000
EMMC ROM1 (Main User Data) Capacity: 3728 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x08] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x08.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x01
---------------------------------------------
Backup saved: H4G2b _ 112659504_20170401_1644.extcsd
Done.
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 1800 mV
Box S/N: 02002018C5B6AEE7, ,FW Ver.: 01.58
CMD Pullup Level:1732 mV
CMD Active Level:1784 mV
Box IO Level:1800 mV
CLK Rate:14000 khz
HiPower mode is ON!
---------- eMMC Device Information ----------
EMMC CID : 90014A4834473262110106B70C305284
EMMC CSD : D07F01320F5903FFFFFFFFEF8A4040DA
EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 05/2015 Rev.0x1
EMMC NAME: H4G2b , S/N: 112659504
EMMC NAME (HEX): 48344732622000
EMMC ROM1 (Main User Data) Capacity: 3728 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x08] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x08.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x01
---------------------------------------------
Backup saved: H4G2b _ 112659504_20170401_1644.extcsd
Searching for partition tables...
Detected GPT over MBR...
Medium UUID: 98101B32-BBE2-4BF2-A06E-2BB33D000C20
Warning: Entries Count = 26
MMCBLK0P0 (SBOOT) Range: [0X400000,0X5FFE00] ,Len: 200000
MMCBLK0P1 (SBOOT2) Range: [0X600000,0X7FFE00] ,Len: 200000
MMCBLK0P2 (WFIXNV1) Range: [0X800000,0X8FFE00] ,Len: 100000
MMCBLK0P3 (WFIXNV2) Range: [0X900000,0X9FFE00] ,Len: 100000
MMCBLK0P4 (TDFIXNV1) Range: [0XA00000,0XAFFE00] ,Len: 100000
MMCBLK0P5 (TDFIXNV2) Range: [0XB00000,0XBFFE00] ,Len: 100000
MMCBLK0P6 (WDSP) Range: [0XC00000,0XFFFE00] ,Len: 400000
MMCBLK0P7 (MODEM) Range: [0X1000000,0X17FFE00] ,Len: 800000
MMCBLK0P8 (MODEM2) Range: [0X1800000,0X1FFFE00] ,Len: 800000
MMCBLK0P9 (TDDSP) Range: [0X2000000,0X23FFE00] ,Len: 400000
MMCBLK0P10 (FOTA_SIG) Range: [0X2400000,0X24FFE00] ,Len: 100000
MMCBLK0P11 (WRUNTIMENV1) Range: [0X2500000,0X25FFE00] ,Len: 100000
MMCBLK0P12 (WRUNTIMENV2) Range: [0X2600000,0X26FFE00] ,Len: 100000
MMCBLK0P13 (TDRUNTIMENV1) Range: [0X2700000,0X27FFE00] ,Len: 100000
MMCBLK0P14 (TDRUNTIMENV2) Range: [0X2800000,0X28FFE00] ,Len: 100000
MMCBLK0P15 (PARAM) Range: [0X2900000,0X2AFFE00] ,Len: 200000
MMCBLK0P16 (EFS) Range: [0X2B00000,0X3EFFE00] ,Len: 1400000
MMCBLK0P17 (PRODNV) Range: [0X3F00000,0X43FFE00] ,Len: 500000
MMCBLK0P18 (RESERVED2) Range: [0X4400000,0X44FFE00] ,Len: 100000
MMCBLK0P19 (KERNEL) Range: [0X4500000,0X54FFE00] ,Len: 1000000
MMCBLK0P20 (RECOVERY) Range: [0X5500000,0X64FFE00] ,Len: 1000000
MMCBLK0P21 (CSC) Range: [0X6500000,0X12CFFE00] ,Len: C800000
MMCBLK0P22 (SYSTEM) Range: [0X12D00000,0X53CFFE00] ,Len: 41000000
MMCBLK0P23 (HIDDEN) Range: [0X53D00000,0X564FFE00] ,Len: 2800000
MMCBLK0P24 (USERDATA) Range: [0X56500000,0XE8FFFE00] ,Len: 92B00000
Done...Presets has been updated...
Done.
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 1800 mV
Box S/N: 02002018C5B6AEE7, ,FW Ver.: 01.58
CMD Pullup Level:1732 mV
CMD Active Level:1773 mV
Box IO Level:1800 mV
CLK Rate:14000 khz
HiPower mode is ON!
---------- eMMC Device Information ----------
EMMC CID : 90014A4834473262110106B70C305284
EMMC CSD : D07F01320F5903FFFFFFFFEF8A4040DA
EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 05/2015 Rev.0x1
EMMC NAME: H4G2b , S/N: 112659504
EMMC NAME (HEX): 48344732622000
EMMC ROM1 (Main User Data) Capacity: 3728 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x08] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x08.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x01
---------------------------------------------
Backup saved: H4G2b _ 112659504_20170401_1645.extcsd
Done.
Running:eMMC: Factory Format...
Z3X EasyJtag Software ver. 2.5.0.8
Skip loading eMMC Addon Firmware
CMD Pullup Level:1732 mV
CMD Active Level:1773 mV
Box IO Level:1800 mV
CLK Rate:14000 khz
Formatting eMMC card, please wait up to 3 min...
Setting Service Mode...
eMMC Format Done.
Done.
Checking NAND Image : D:\Samsung - TV\j100h\SM-J100h_J100HXCU0AOD4_ROM1_OK.bin
Autodetected RAW data
File successefuly loaded!
Checking NAND Image : D:\Samsung - TV\j100h\H4G2b _ 112659504_20170329_1242.extcsd
File successefuly loaded!
Found ROM1 and automatically selected.
Processing file...D:\Samsung - TV\j100h\H4G2b _ 112659504_20170329_1242.extcsd
Processing file...D:\Samsung - TV\j100h\SM-J100h_J100HXCU0AOD4_ROM1_OK.bin
ROM2 Are not selected , skip writing ROM2
ROM3 Are not selected , skip writing ROM3
Running:Repair extCSD...
Z3X EasyJtag Software ver. 2.5.0.8
Skip loading eMMC Addon Firmware
CMD Pullup Level:1732 mV
CMD Active Level:1773 mV
Box IO Level:1800 mV
CLK Rate:14000 khz
Writing...
Done.
Z3X EasyJtag Software ver. 2.5.0.8
Skip loading eMMC Addon Firmware
CMD Pullup Level:1732 mV
CMD Active Level:1773 mV
Length limit is enabled!
Input file : D:\Samsung - TV\j100h\SM-J100h_J100HXCU0AOD4_ROM1_OK.bin
Writing 0000000200 bytes to 0000000000... ROM1 (USER ROM)
Done. Write Speed: 2 kB/s
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 1800 mV
Box S/N: 02002018C5B6AEE7, ,FW Ver.: 01.58
CMD Pullup Level:381 mV
CMD Active Level:1577 mV
Box IO Level:1800 mV
CLK Rate:14000 khz
HiPower mode is ON!
Can't init device, Reason: CMD Timeout Error
Done.
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 1800 mV
Box S/N: 02002018C5B6AEE7, ,FW Ver.: 01.58
CMD Pullup Level:371 mV
CMD Active Level:1557 mV
Box IO Level:1800 mV
CLK Rate:14000 khz
HiPower mode is ON!
Can't init device, Reason: CMD Timeout Error
Done.
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 1800 mV
Box S/N: 02002018C5B6AEE7, ,FW Ver.: 01.58
CMD Pullup Level:1732 mV
CMD Active Level:1794 mV
Box IO Level:1800 mV
CLK Rate:14000 khz
HiPower mode is ON!
---------- eMMC Device Information ----------
EMMC CID : 65646F4D204D4F521281000002400152
EMMC CSD : D07FFF320F59007FF6DB80001E40001C
EMMC Manufacturer ID: 0065 , OEM ID: 646F
EMMC Date: 00/2014 Rev.0x81
EMMC NAME: M MOR , S/N: 576
EMMC NAME (HEX): 4D204D4F522000
EMMC ROM1 (Main User Data) Capacity: 128 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x78] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x78.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x03
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: M MOR _ 576_20170401_1656.extcsd
Done.
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 1800 mV
Box S/N: 02002018C5B6AEE7, ,FW Ver.: 01.58
CMD Pullup Level:1732 mV
CMD Active Level:1804 mV
Box IO Level:1800 mV
CLK Rate:14000 khz
HiPower mode is ON!
---------- eMMC Device Information ----------
EMMC CID : 65646F4D204D4F521281000002400152
EMMC CSD : D07FFF320F59007FF6DB80001E40001C
EMMC Manufacturer ID: 0065 , OEM ID: 646F
EMMC Date: 00/2014 Rev.0x81
EMMC NAME: M MOR , S/N: 576
EMMC NAME (HEX): 4D204D4F522000
EMMC ROM1 (Main User Data) Capacity: 128 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x78] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x78.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x03
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: M MOR _ 576_20170401_1657.extcsd
Done.
Running:eMMC: Factory Format...
Z3X EasyJtag Software ver. 2.5.0.8
Skip loading eMMC Addon Firmware
CMD Pullup Level:1732 mV
CMD Active Level:1804 mV
Box IO Level:1800 mV
CLK Rate:14000 khz
Formatting eMMC card, please wait up to 3 min...
Setting Service Mode FAILED....
eMMC Format Failed.
Done.
M MOR _ 576_20170401_1657.extcsd
emmc chết luôn rôi
tk bác. e repaid lại ok nhưng lại ko write đc nữa.chắc phải thay emmc thôi.cho e hỏi thay xong emmc mới thì ta phải làm như thế nào ạ.Trích:
Được post bởi TÍNH-NGHI_MOBILE
các bác cho e hỏi sau khi làm phần cứng là thay emmc xong thì phần mềm ta phải làm nhue thế nào ạ.e có easy jtag ạ
----
---------- eMMC Device Information ----------
EMMC CID : 90014A4834473262110106B70C305284
EMMC CSD : D07F01320F5903FFFFFFFFEF8A4040DA
EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 05/2015 Rev.0x1
EMMC NAME: H4G2b , S/N: 112659504
EMMC NAME (HEX): 48344732622000
EMMC ROM1 (Main User Data) Capacity: 3728 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x08] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x08.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x01
---------------------------------------------
Backup saved: H4G2b _ 112659504_20170401_1644.extcsd
Searching for partition tables...
Detected GPT over MBR...
Medium UUID: 98101B32-BBE2-4BF2-A06E-2BB33D000C20
Warning: Entries Count = 26
MMCBLK0P0 (SBOOT) Range: [0X400000,0X5FFE00] ,Len: 200000
MMCBLK0P1 (SBOOT2) Range: [0X600000,0X7FFE00] ,Len: 200000
MMCBLK0P2 (WFIXNV1) Range: [0X800000,0X8FFE00] ,Len: 100000
MMCBLK0P3 (WFIXNV2) Range: [0X900000,0X9FFE00] ,Len: 100000
MMCBLK0P4 (TDFIXNV1) Range: [0XA00000,0XAFFE00] ,Len: 100000
MMCBLK0P5 (TDFIXNV2) Range: [0XB00000,0XBFFE00] ,Len: 100000
MMCBLK0P6 (WDSP) Range: [0XC00000,0XFFFE00] ,Len: 400000
MMCBLK0P7 (MODEM) Range: [0X1000000,0X17FFE00] ,Len: 800000
MMCBLK0P8 (MODEM2) Range: [0X1800000,0X1FFFE00] ,Len: 800000
MMCBLK0P9 (TDDSP) Range: [0X2000000,0X23FFE00] ,Len: 400000
MMCBLK0P10 (FOTA_SIG) Range: [0X2400000,0X24FFE00] ,Len: 100000
MMCBLK0P11 (WRUNTIMENV1) Range: [0X2500000,0X25FFE00] ,Len: 100000
MMCBLK0P12 (WRUNTIMENV2) Range: [0X2600000,0X26FFE00] ,Len: 100000
MMCBLK0P13 (TDRUNTIMENV1) Range: [0X2700000,0X27FFE00] ,Len: 100000
MMCBLK0P14 (TDRUNTIMENV2) Range: [0X2800000,0X28FFE00] ,Len: 100000
MMCBLK0P15 (PARAM) Range: [0X2900000,0X2AFFE00] ,Len: 200000
MMCBLK0P16 (EFS) Range: [0X2B00000,0X3EFFE00] ,Len: 1400000
MMCBLK0P17 (PRODNV) Range: [0X3F00000,0X43FFE00] ,Len: 500000
MMCBLK0P18 (RESERVED2) Range: [0X4400000,0X44FFE00] ,Len: 100000
MMCBLK0P19 (KERNEL) Range: [0X4500000,0X54FFE00] ,Len: 1000000
MMCBLK0P20 (RECOVERY) Range: [0X5500000,0X64FFE00] ,Len: 1000000
MMCBLK0P21 (CSC) Range: [0X6500000,0X12CFFE00] ,Len: C800000
MMCBLK0P22 (SYSTEM) Range: [0X12D00000,0X53CFFE00] ,Len: 41000000
MMCBLK0P23 (HIDDEN) Range: [0X53D00000,0X564FFE00] ,Len: 2800000
MMCBLK0P24 (USERDATA) Range: [0X56500000,0XE8FFFE00] ,Len: 92B00000
Done...Presets has been updated...
Done.
log đẹp .k thể chết emmc dc.
vậy nhưng e ko thể write được file bin vào bác ạ.cho e hỏi con này write bin vào rom2 hay rom1 ạ.Trích:
Được post bởi tran hoi
xem log phần dưới luôn kìa(Backup saved: M MOR _ 576_20170401_1657.extcsdTrích:
Được post bởi tran hoi
Done.)
EMMC CID : 65646F4D204D4F521281000002400152
EMMC CSD : D07FFF320F59007FF6DB80001E40001C
EMMC Manufacturer ID: 0065 , OEM ID: 646F
EMMC Date: 00/2014 Rev.0x81
EMMC NAME: M MOR , S/N: 576
EMMC NAME (HEX): 4D204D4F522000
EMMC ROM1 (Main User Data) Capacity: 128 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x78] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x78.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x03
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: M MOR _ 576_20170401_1657.extcsd
Done.
Running:eMMC: Factory Format...
Z3X EasyJtag Software ver. 2.5.0.8
Skip loading eMMC Addon Firmware
CMD Pullup Level:1732 mV
CMD Active Level:1804 mV
Box IO Level:1800 mV
CLK Rate:14000 khz
Formatting eMMC card, please wait up to 3 min...
Setting Service Mode FAILED....
eMMC Format Failed.
Done.