xin hướng dẫn cài box z3x easy jtag

**hải anh** · 26-06-2015 16:50

mình mới mua box về nên chưa biết cài, anh em nào đã cài và sử dụng ok xin chỉ giáo cho mình học hỏi với

thanks anh em

**hoangtrung02** · 29-03-2017 18:44

e cũng thế.ko lập đc bài mới nên viết ở đây.xin các bác hướng dẫn cho cách sử dụng cơ bản của easy jtag box ạ.e cảm ơn.

**bvt hp** · 29-03-2017 19:44

load về setup là ok
http://cp.z3x-team.com/static/latest_shell.exe

**hoangtrung02** · 01-04-2017 16:07

bác có thể nói qua cách làm boot cho dòng máy samsung đc ko ạ.vd máy g355h chẳng hạn.e chưa biết bắt đầu từ đâu.cảm ơn bác!

**hoangtrung02** · 01-04-2017 17:06

xin các bác xem giúp ạ
EasyJtag Suite Classic ver.: 2.5.0.8 / wxWidgets 3.1.0-W-U started.
OS ver.: Windows 7 (build 7600). Admin rights OK
undefined
Android Explorer ver.: 1.0.0.23
eMMC ODIN ver.: 1.0.11.2
Successfully connected to box on COM10
Box S/N: 02002018C5B6AEE7, ,FW Ver.: 01.58
Box Working Mode: JTAG Box.
Box Drivers version: 3.0.1.0, are OK
Z3X Card Serial : AA01-3EE1 , ver: 22
Z3X Card Activation [LG] : NOT ACTIVATED
Z3X Card Activation [SAMS] : NOT ACTIVATED
Z3X Card Activation [JTAG] : ACTIVATED

Z3X EasyJtag Software ver. 2.5.0.8

Loading eMMC Addon Firmware... IO: 1800 mV
Box S/N: 02002018C5B6AEE7, ,FW Ver.: 01.58
CMD Pullup Level:1722 mV
CMD Active Level:1773 mV
Box IO Level:1800 mV
CLK Rate:14000 khz
HiPower mode is off!
---------- eMMC Device Information ----------

EMMC CID : 90014A4834473262110106B70C305284
EMMC CSD : D07F01320F5903FFFFFFFFEF8A4040DA
EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 05/2015 Rev.0x1
EMMC NAME: H4G2b , S/N: 112659504
EMMC NAME (HEX): 48344732622000
EMMC ROM1 (Main User Data) Capacity: 3728 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x08] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x08.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x01
---------------------------------------------
Backup saved: H4G2b _ 112659504_20170401_1644.extcsd
Done.

Z3X EasyJtag Software ver. 2.5.0.8

Loading eMMC Addon Firmware... IO: 1800 mV
Box S/N: 02002018C5B6AEE7, ,FW Ver.: 01.58
CMD Pullup Level:1732 mV
CMD Active Level:1784 mV
Box IO Level:1800 mV
CLK Rate:14000 khz
HiPower mode is ON!
---------- eMMC Device Information ----------

EMMC CID : 90014A4834473262110106B70C305284
EMMC CSD : D07F01320F5903FFFFFFFFEF8A4040DA
EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 05/2015 Rev.0x1
EMMC NAME: H4G2b , S/N: 112659504
EMMC NAME (HEX): 48344732622000
EMMC ROM1 (Main User Data) Capacity: 3728 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x08] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x08.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x01
---------------------------------------------
Backup saved: H4G2b _ 112659504_20170401_1644.extcsd
Searching for partition tables...
Detected GPT over MBR...
Medium UUID: 98101B32-BBE2-4BF2-A06E-2BB33D000C20
Warning: Entries Count = 26
MMCBLK0P0 (SBOOT) Range: [0X400000,0X5FFE00] ,Len: 200000
MMCBLK0P1 (SBOOT2) Range: [0X600000,0X7FFE00] ,Len: 200000
MMCBLK0P2 (WFIXNV1) Range: [0X800000,0X8FFE00] ,Len: 100000
MMCBLK0P3 (WFIXNV2) Range: [0X900000,0X9FFE00] ,Len: 100000
MMCBLK0P4 (TDFIXNV1) Range: [0XA00000,0XAFFE00] ,Len: 100000
MMCBLK0P5 (TDFIXNV2) Range: [0XB00000,0XBFFE00] ,Len: 100000
MMCBLK0P6 (WDSP) Range: [0XC00000,0XFFFE00] ,Len: 400000
MMCBLK0P7 (MODEM) Range: [0X1000000,0X17FFE00] ,Len: 800000
MMCBLK0P8 (MODEM2) Range: [0X1800000,0X1FFFE00] ,Len: 800000
MMCBLK0P9 (TDDSP) Range: [0X2000000,0X23FFE00] ,Len: 400000
MMCBLK0P10 (FOTA_SIG) Range: [0X2400000,0X24FFE00] ,Len: 100000
MMCBLK0P11 (WRUNTIMENV1) Range: [0X2500000,0X25FFE00] ,Len: 100000
MMCBLK0P12 (WRUNTIMENV2) Range: [0X2600000,0X26FFE00] ,Len: 100000
MMCBLK0P13 (TDRUNTIMENV1) Range: [0X2700000,0X27FFE00] ,Len: 100000
MMCBLK0P14 (TDRUNTIMENV2) Range: [0X2800000,0X28FFE00] ,Len: 100000
MMCBLK0P15 (PARAM) Range: [0X2900000,0X2AFFE00] ,Len: 200000
MMCBLK0P16 (EFS) Range: [0X2B00000,0X3EFFE00] ,Len: 1400000
MMCBLK0P17 (PRODNV) Range: [0X3F00000,0X43FFE00] ,Len: 500000
MMCBLK0P18 (RESERVED2) Range: [0X4400000,0X44FFE00] ,Len: 100000
MMCBLK0P19 (KERNEL) Range: [0X4500000,0X54FFE00] ,Len: 1000000
MMCBLK0P20 (RECOVERY) Range: [0X5500000,0X64FFE00] ,Len: 1000000
MMCBLK0P21 (CSC) Range: [0X6500000,0X12CFFE00] ,Len: C800000
MMCBLK0P22 (SYSTEM) Range: [0X12D00000,0X53CFFE00] ,Len: 41000000
MMCBLK0P23 (HIDDEN) Range: [0X53D00000,0X564FFE00] ,Len: 2800000
MMCBLK0P24 (USERDATA) Range: [0X56500000,0XE8FFFE00] ,Len: 92B00000
Done...Presets has been updated...

Done.

Z3X EasyJtag Software ver. 2.5.0.8

Loading eMMC Addon Firmware... IO: 1800 mV
Box S/N: 02002018C5B6AEE7, ,FW Ver.: 01.58
CMD Pullup Level:1732 mV
CMD Active Level:1773 mV
Box IO Level:1800 mV
CLK Rate:14000 khz
HiPower mode is ON!
---------- eMMC Device Information ----------

EMMC CID : 90014A4834473262110106B70C305284
EMMC CSD : D07F01320F5903FFFFFFFFEF8A4040DA
EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 05/2015 Rev.0x1
EMMC NAME: H4G2b , S/N: 112659504
EMMC NAME (HEX): 48344732622000
EMMC ROM1 (Main User Data) Capacity: 3728 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x08] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x08.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x01
---------------------------------------------
Backup saved: H4G2b _ 112659504_20170401_1645.extcsd
Done.

Running:eMMC: Factory Format...
Z3X EasyJtag Software ver. 2.5.0.8
Skip loading eMMC Addon Firmware
CMD Pullup Level:1732 mV
CMD Active Level:1773 mV
Box IO Level:1800 mV
CLK Rate:14000 khz
Formatting eMMC card, please wait up to 3 min...
Setting Service Mode...
eMMC Format Done.

Done.
Checking NAND Image : D:\Samsung - TV\j100h\SM-J100h_J100HXCU0AOD4_ROM1_OK.bin
Autodetected RAW data
File successefuly loaded!

Checking NAND Image : D:\Samsung - TV\j100h\H4G2b _ 112659504_20170329_1242.extcsd
File successefuly loaded!

Found ROM1 and automatically selected.
Processing file...D:\Samsung - TV\j100h\H4G2b _ 112659504_20170329_1242.extcsd
Processing file...D:\Samsung - TV\j100h\SM-J100h_J100HXCU0AOD4_ROM1_OK.bin
ROM2 Are not selected , skip writing ROM2
ROM3 Are not selected , skip writing ROM3
Running:Repair extCSD...
Z3X EasyJtag Software ver. 2.5.0.8
Skip loading eMMC Addon Firmware
CMD Pullup Level:1732 mV
CMD Active Level:1773 mV
Box IO Level:1800 mV
CLK Rate:14000 khz
Writing...
Done.

Z3X EasyJtag Software ver. 2.5.0.8
Skip loading eMMC Addon Firmware
CMD Pullup Level:1732 mV
CMD Active Level:1773 mV
Length limit is enabled!
Input file : D:\Samsung - TV\j100h\SM-J100h_J100HXCU0AOD4_ROM1_OK.bin
Writing 0000000200 bytes to 0000000000... ROM1 (USER ROM)
Done. Write Speed: 2 kB/s

Z3X EasyJtag Software ver. 2.5.0.8

Loading eMMC Addon Firmware... IO: 1800 mV
Box S/N: 02002018C5B6AEE7, ,FW Ver.: 01.58
CMD Pullup Level:381 mV
CMD Active Level:1577 mV
Box IO Level:1800 mV
CLK Rate:14000 khz
HiPower mode is ON!
Can't init device, Reason: CMD Timeout Error
Done.

Z3X EasyJtag Software ver. 2.5.0.8

Loading eMMC Addon Firmware... IO: 1800 mV
Box S/N: 02002018C5B6AEE7, ,FW Ver.: 01.58
CMD Pullup Level:371 mV
CMD Active Level:1557 mV
Box IO Level:1800 mV
CLK Rate:14000 khz
HiPower mode is ON!
Can't init device, Reason: CMD Timeout Error
Done.

Z3X EasyJtag Software ver. 2.5.0.8

Loading eMMC Addon Firmware... IO: 1800 mV
Box S/N: 02002018C5B6AEE7, ,FW Ver.: 01.58
CMD Pullup Level:1732 mV
CMD Active Level:1794 mV
Box IO Level:1800 mV
CLK Rate:14000 khz
HiPower mode is ON!
---------- eMMC Device Information ----------

EMMC CID : 65646F4D204D4F521281000002400152
EMMC CSD : D07FFF320F59007FF6DB80001E40001C
EMMC Manufacturer ID: 0065 , OEM ID: 646F
EMMC Date: 00/2014 Rev.0x81
EMMC NAME: M MOR , S/N: 576
EMMC NAME (HEX): 4D204D4F522000
EMMC ROM1 (Main User Data) Capacity: 128 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x78] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x78.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x03
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: M MOR _ 576_20170401_1656.extcsd
Done.

Z3X EasyJtag Software ver. 2.5.0.8

Loading eMMC Addon Firmware... IO: 1800 mV
Box S/N: 02002018C5B6AEE7, ,FW Ver.: 01.58
CMD Pullup Level:1732 mV
CMD Active Level:1804 mV
Box IO Level:1800 mV
CLK Rate:14000 khz
HiPower mode is ON!
---------- eMMC Device Information ----------

EMMC CID : 65646F4D204D4F521281000002400152
EMMC CSD : D07FFF320F59007FF6DB80001E40001C
EMMC Manufacturer ID: 0065 , OEM ID: 646F
EMMC Date: 00/2014 Rev.0x81
EMMC NAME: M MOR , S/N: 576
EMMC NAME (HEX): 4D204D4F522000
EMMC ROM1 (Main User Data) Capacity: 128 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x78] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x78.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x03
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: M MOR _ 576_20170401_1657.extcsd
Done.

Running:eMMC: Factory Format...
Z3X EasyJtag Software ver. 2.5.0.8
Skip loading eMMC Addon Firmware
CMD Pullup Level:1732 mV
CMD Active Level:1804 mV
Box IO Level:1800 mV
CLK Rate:14000 khz
Formatting eMMC card, please wait up to 3 min...
Setting Service Mode FAILED....
eMMC Format Failed.

Done.

**TÍNH-NGHI_MOBILE** · 01-04-2017 17:50

M MOR _ 576_20170401_1657.extcsd
emmc chết luôn rôi

**hoangtrung02** · 01-04-2017 18:43

Được post bởi TÍNH-NGHI_MOBILE

M MOR _ 576_20170401_1657.extcsd
emmc chết luôn rôi

tk bác. e repaid lại ok nhưng lại ko write đc nữa.chắc phải thay emmc thôi.cho e hỏi thay xong emmc mới thì ta phải làm như thế nào ạ.

**hoangtrung02** · 02-04-2017 17:23

các bác cho e hỏi sau khi làm phần cứng là thay emmc xong thì phần mềm ta phải làm nhue thế nào ạ.e có easy jtag ạ

**tran hoi** · 03-04-2017 17:20

----
---------- eMMC Device Information ----------

EMMC CID : 90014A4834473262110106B70C305284
EMMC CSD : D07F01320F5903FFFFFFFFEF8A4040DA
EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 05/2015 Rev.0x1
EMMC NAME: H4G2b , S/N: 112659504
EMMC NAME (HEX): 48344732622000
EMMC ROM1 (Main User Data) Capacity: 3728 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x08] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x08.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x01
---------------------------------------------
Backup saved: H4G2b _ 112659504_20170401_1644.extcsd
Searching for partition tables...
Detected GPT over MBR...
Medium UUID: 98101B32-BBE2-4BF2-A06E-2BB33D000C20
Warning: Entries Count = 26
MMCBLK0P0 (SBOOT) Range: [0X400000,0X5FFE00] ,Len: 200000
MMCBLK0P1 (SBOOT2) Range: [0X600000,0X7FFE00] ,Len: 200000
MMCBLK0P2 (WFIXNV1) Range: [0X800000,0X8FFE00] ,Len: 100000
MMCBLK0P3 (WFIXNV2) Range: [0X900000,0X9FFE00] ,Len: 100000
MMCBLK0P4 (TDFIXNV1) Range: [0XA00000,0XAFFE00] ,Len: 100000
MMCBLK0P5 (TDFIXNV2) Range: [0XB00000,0XBFFE00] ,Len: 100000
MMCBLK0P6 (WDSP) Range: [0XC00000,0XFFFE00] ,Len: 400000
MMCBLK0P7 (MODEM) Range: [0X1000000,0X17FFE00] ,Len: 800000
MMCBLK0P8 (MODEM2) Range: [0X1800000,0X1FFFE00] ,Len: 800000
MMCBLK0P9 (TDDSP) Range: [0X2000000,0X23FFE00] ,Len: 400000
MMCBLK0P10 (FOTA_SIG) Range: [0X2400000,0X24FFE00] ,Len: 100000
MMCBLK0P11 (WRUNTIMENV1) Range: [0X2500000,0X25FFE00] ,Len: 100000
MMCBLK0P12 (WRUNTIMENV2) Range: [0X2600000,0X26FFE00] ,Len: 100000
MMCBLK0P13 (TDRUNTIMENV1) Range: [0X2700000,0X27FFE00] ,Len: 100000
MMCBLK0P14 (TDRUNTIMENV2) Range: [0X2800000,0X28FFE00] ,Len: 100000
MMCBLK0P15 (PARAM) Range: [0X2900000,0X2AFFE00] ,Len: 200000
MMCBLK0P16 (EFS) Range: [0X2B00000,0X3EFFE00] ,Len: 1400000
MMCBLK0P17 (PRODNV) Range: [0X3F00000,0X43FFE00] ,Len: 500000
MMCBLK0P18 (RESERVED2) Range: [0X4400000,0X44FFE00] ,Len: 100000
MMCBLK0P19 (KERNEL) Range: [0X4500000,0X54FFE00] ,Len: 1000000
MMCBLK0P20 (RECOVERY) Range: [0X5500000,0X64FFE00] ,Len: 1000000
MMCBLK0P21 (CSC) Range: [0X6500000,0X12CFFE00] ,Len: C800000
MMCBLK0P22 (SYSTEM) Range: [0X12D00000,0X53CFFE00] ,Len: 41000000
MMCBLK0P23 (HIDDEN) Range: [0X53D00000,0X564FFE00] ,Len: 2800000
MMCBLK0P24 (USERDATA) Range: [0X56500000,0XE8FFFE00] ,Len: 92B00000
Done...Presets has been updated...

Done.

log đẹp .k thể chết emmc dc.

**hoangtrung02** · 04-04-2017 20:38

Được post bởi tran hoi

----
---------- eMMC Device Information ----------

EMMC CID : 90014A4834473262110106B70C305284
EMMC CSD : D07F01320F5903FFFFFFFFEF8A4040DA
EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 05/2015 Rev.0x1
EMMC NAME: H4G2b , S/N: 112659504
EMMC NAME (HEX): 48344732622000
EMMC ROM1 (Main User Data) Capacity: 3728 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x08] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x08.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x01
---------------------------------------------
Backup saved: H4G2b _ 112659504_20170401_1644.extcsd
Searching for partition tables...
Detected GPT over MBR...
Medium UUID: 98101B32-BBE2-4BF2-A06E-2BB33D000C20
Warning: Entries Count = 26
MMCBLK0P0 (SBOOT) Range: [0X400000,0X5FFE00] ,Len: 200000
MMCBLK0P1 (SBOOT2) Range: [0X600000,0X7FFE00] ,Len: 200000
MMCBLK0P2 (WFIXNV1) Range: [0X800000,0X8FFE00] ,Len: 100000
MMCBLK0P3 (WFIXNV2) Range: [0X900000,0X9FFE00] ,Len: 100000
MMCBLK0P4 (TDFIXNV1) Range: [0XA00000,0XAFFE00] ,Len: 100000
MMCBLK0P5 (TDFIXNV2) Range: [0XB00000,0XBFFE00] ,Len: 100000
MMCBLK0P6 (WDSP) Range: [0XC00000,0XFFFE00] ,Len: 400000
MMCBLK0P7 (MODEM) Range: [0X1000000,0X17FFE00] ,Len: 800000
MMCBLK0P8 (MODEM2) Range: [0X1800000,0X1FFFE00] ,Len: 800000
MMCBLK0P9 (TDDSP) Range: [0X2000000,0X23FFE00] ,Len: 400000
MMCBLK0P10 (FOTA_SIG) Range: [0X2400000,0X24FFE00] ,Len: 100000
MMCBLK0P11 (WRUNTIMENV1) Range: [0X2500000,0X25FFE00] ,Len: 100000
MMCBLK0P12 (WRUNTIMENV2) Range: [0X2600000,0X26FFE00] ,Len: 100000
MMCBLK0P13 (TDRUNTIMENV1) Range: [0X2700000,0X27FFE00] ,Len: 100000
MMCBLK0P14 (TDRUNTIMENV2) Range: [0X2800000,0X28FFE00] ,Len: 100000
MMCBLK0P15 (PARAM) Range: [0X2900000,0X2AFFE00] ,Len: 200000
MMCBLK0P16 (EFS) Range: [0X2B00000,0X3EFFE00] ,Len: 1400000
MMCBLK0P17 (PRODNV) Range: [0X3F00000,0X43FFE00] ,Len: 500000
MMCBLK0P18 (RESERVED2) Range: [0X4400000,0X44FFE00] ,Len: 100000
MMCBLK0P19 (KERNEL) Range: [0X4500000,0X54FFE00] ,Len: 1000000
MMCBLK0P20 (RECOVERY) Range: [0X5500000,0X64FFE00] ,Len: 1000000
MMCBLK0P21 (CSC) Range: [0X6500000,0X12CFFE00] ,Len: C800000
MMCBLK0P22 (SYSTEM) Range: [0X12D00000,0X53CFFE00] ,Len: 41000000
MMCBLK0P23 (HIDDEN) Range: [0X53D00000,0X564FFE00] ,Len: 2800000
MMCBLK0P24 (USERDATA) Range: [0X56500000,0XE8FFFE00] ,Len: 92B00000
Done...Presets has been updated...

Done.

log đẹp .k thể chết emmc dc.

vậy nhưng e ko thể write được file bin vào bác ạ.cho e hỏi con này write bin vào rom2 hay rom1 ạ.

LinkBack

Công cụ

Hiển thị

xin hướng dẫn cài box z3x easy jtag

( bvt hp ) được 1 thành viên cảm ơn vì bài viết hữu ích!

( TÍNH-NGHI_MOBILE ) được 1 thành viên cảm ơn vì bài viết hữu ích!

( tran hoi ) được 1 thành viên cảm ơn vì bài viết hữu ích!

Thread Information

Users Browsing this Thread

Quyền viết bài