E63 mong anh em giúp với

[hientrang.mobile1]

mình có con máy e63 khách nói đang dùng bị đơ tháo pin lắp lại
bật nguồn thì chỉ rung một cái nên đen hình hơi sáng
đây là log của nó băng mxky khi bus
MXKEY Serial: [FT SCR2000 0] - C0818161
Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Connection status: UHCI:HUB:HUB:USB 1.10 (Full-speed)
Driver: UFS2XX, ver: 3.8.14.0 , NTMP ver: 2.8.14.0
Module ver: 1.0.0.18624(06-08-2011), Library ver: 1.0.0.12274(06-08-2011)
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101051103 [RAPIDO3G ver: 1.15]
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 1FC00107A4980052A88C410119C7D84D477FC231
ASIC MODE ID: 00
ROOT KEY HASH: C70CB07324056BC66A824347F40DB2D5
ROM ID: 4B9B75103E691FF8
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 9.50.0 revision: 2.0 size: 0x3B40
Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
eBB5ProtocolType: NEW
NewProtocol is not supported for current interface (UFS_USB V2.8 (c) SarasSoft 2007.).
Please select correct loader version from 'Config' menu !



còn đây là khi chạy bằng mxkey

MXKEY Serial: [FT SCR2000 0] - C0818161
Connection status: UHCI:HUB::USB 2.00 (Full-speed)
Driver: nmwcdnsuc, ver: 7.1.32.67
Module ver: 1.0.0.18624(06-08-2011), Library ver: 1.0.0.12274(06-08-2011)
Processing MCU file: rm437_510.21.010_prd.c00
[BB5,XSR 1.5] size: 63.43 MB
Supported Ids: 4003192101002003, 400C192101002003, 0003192101002003, 000C192101002003, 000C192101011103, 0003192101011103, 400C192101011103, 4003192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101051103, 400C192101051103
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB device ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 30ADB340
CMT SYSTEM ASIC ID: 000000010000022600010006400C192101051103 [RAPIDO3G ver: 1.15]
CMT EM0 ID: 00000296
CMT EM1 ID: 00000B22
CMT PUBLIC ID: 1FC00107A4980052A88C410119C7D84D477FC231
CMT ASIC MODE ID: 00
CMT ROOT KEY HASH: C70CB07324056BC66A824347F40DB2D5
CMT ROM ID: 4B9B75103E691FF8
Loading CMT secondary boot code
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 11.14.0 revision: 2.0 size: 0x3B80
Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
eBB5ProtocolType: NEW
Secondary boot loaded.
Storage0: 0000 0000 - 0000 0000 type: RAM, asic:CMT
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
Storage2: 0020 0040 - 0000 0031 [ST NAND KAT00F00RA] type: FLASH,NOR, asic:CMT
Storage3: 0000 0001 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage4: 0020 0040 - 0000 0031 [ST NAND KAT00F00RA] type: FLASH,MuxOneNAND, asic:CMT
Suggested algorithm: XSR 1.5
Loading CMT update server data
Algorithm: RAPIDOv11_XSR15_alg.fg [XSR 1.5] version: 11.14.0 revision: 2.0 size: 0x8798F
Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
Update server code loaded.
FUR: Adding Asic CMT as client OK.
CERT backup skipped.
CMT PAPUBKEYS HASH: D9C25399C696B8549EDCDB1497A950B3A20DDFB6
Storing certificate [NPC, CCC, HWC, R&D] ...OK
Partitioning....
Partitioning complete
Erase size: 122.56 MB
CMT FLASH,MuxOneNAND area [00040000-007FFFFF]
CMT FLASH,MuxOneNAND area [00A00000-0759FFFF]
CMT FLASH,MuxOneNAND area [0F1C0000-0F8BFFFF]
Formating partition ...
Flash programming ...
CMT ADA block sent
CMT KEYS block sent
CMT PRIMAPP block sent
CMT RAP3NAND block sent
CMT PASUBTOC block sent
CMT PAPUBKEYS: D9C25399 [RAP Certificate 137 v.1] sent
CMT SOS*UPDAPP block sent
CMT SOS*DSP0 block sent
CMT SOS*ISASW block sent
CMT SOS*CORE block sent
CMT SOS+ROFS block sent
Programming completed in 17 min 48.953 s
Processing PPM file: rm437_510.21.010_prd.v29
[BB5,XSR 1.5] size: 22.51 MB
Supported Ids: 4003192101002003, 400C192101002003, 0003192101002003, 000C192101002003, 000C192101011103, 0003192101011103, 400C192101011103, 4003192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101051103, 400C192101051103
Erase size: 33.56 MB
CMT FLASH,MuxOneNAND area [05420000-0759FFFF]
Formating partition ...
Flash programming ...
CMT SOS+ROFX block sent
Programming completed in 6 min 37.859 s
Processing CNT file: sofie_erase_y_drive.fpsx
[BB5,XSR 1.5] size: 236 Bytes
Supported Ids: 4003192101002003, 400C192101002003, 0003192101002003, 000C192101002003, 000C192101011103, 0003192101011103, 400C192101011103, 4003192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103
Erase size: 1.62 MB
CMT FLASH,MuxOneNAND area [0F020000-0F1BFFFF]
Processing CNT file: rm437_510.21.010.36U
[BB5,XSR 1.5] size: 22.52 MB
Supported Ids: 4003192101002003, 400C192101002003, 0003192101002003, 000C192101002003, 000C192101011103, 0003192101011103, 400C192101011103, 4003192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101051103, 400C192101051103
Erase size: 64 KB
Formating partition ...
Flash programming ...
Programming completed in 6 min 38.188 s
Total time for flashing process(boot+erase+write) was 31 min 19.156 s
Waiting for USB device removal ...
Waiting for device boot up ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 30ADB340
Waiting for USB device removal ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 30ADB340
Verifying communication to device...
ERROR: Could not verify communication !

FULL FACTORY... Failed!
Completed in 0.781 s

mình đã chạy bàng hwk cũng không được
bật chỉ dung một cái
mong anh em giúp

[nhanvnn]

đưa qua Phonex flash dead usb ok luôn bạn.

[tlpmobile_tk]

load file cao hơn chạy USB by Mxkey hay phonix thử coi bạn

[hientrang.mobile1]

mình dùng navifirm tải file cao nhất đúng code rồi các bạn ạ

[hientrang.mobile1]

bạn nào có toll phonex mới nhất cho mình xin với

[tlpmobile_tk]

mình vẫn xài bản này bản thử coi nhé chúc thành công
Phoenix_Service_Software_2011.02.000.44842_Cracked .rar

[hientrang.mobile1]

thankss mìn thử xem sao

[hientrang.mobile1]

không được rồi mình chay phonex nó báo thế này
Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
Loading secondary boot code: 14592 bytes
Secondary boot loaded
Loading update server code: 1953281 bytes
Update server loaded
Asic CMT: Verifying communication to device...
Asic CMT: Verifying communication to device...
Error sending ADL_LDR_GET_MS_INFO_REQ
Error parsing MS info data. Attempting to continue flashing
Flashing SingleAsic device...
Asic CMT: Start programming 110543 KB...
Asic CMT: Erasing rm437_510.21.010_prd.c00
Asic CMT: Erasing area 1...
Asic CMT: Erasing area 2...
Asic CMT: Erasing area 3...
Asic CMT: Partitioning rm437_510.21.010_prd.c00
Asic CMT: Partitioning area 1...
Asic CMT: Erasing rm437_510.21.010_prd.v29
Asic CMT: Erasing area 1...
Asic CMT: Erasing rm437_510.21.010.36U
Asic CMT: Erasing sofie_erase_y_drive.fpsx
Asic CMT: Erasing area 1...
Asic CMT: Erasing RM437_ENO_008.07.45_100.71.952.a018.fpsx
Asic CMT: Programming rm437_510.21.010_prd.c00
Asic CMT: Programming 0%
Asic CMT: Programming 2%
Asic CMT: Programming 4%
Asic CMT: Programming 6%
Asic CMT: Programming 8%
Asic CMT: Programming 10%
Asic CMT: Programming 12%
Asic CMT: Programming 14%
Asic CMT: Programming 16%
Asic CMT: Programming 18%
Asic CMT: Programming 20%
Asic CMT: Programming 22%
Asic CMT: Programming 24%
Asic CMT: Programming 26%
Asic CMT: Programming 28%
Asic CMT: Programming 30%
Asic CMT: Programming 32%
Asic CMT: Programming 34%
Asic CMT: Programming 36%
Asic CMT: Programming 38%
Asic CMT: Programming 40%
Asic CMT: Programming 42%
Asic CMT: Programming 44%
Asic CMT: Programming 46%
Asic CMT: Programming 48%
Asic CMT: Programming 50%
Asic CMT: Programming 52%
Asic CMT: Programming 54%
Asic CMT: Programming 56%
Asic CMT: Programming rm437_510.21.010_prd.v29
Asic CMT: Programming 58%
Asic CMT: Programming 60%
Asic CMT: Programming 62%
Asic CMT: Programming 64%
Asic CMT: Programming 66%
Asic CMT: Programming 68%
Asic CMT: Programming 70%
Asic CMT: Programming 72%
Asic CMT: Programming 74%
Asic CMT: Programming 76%
Asic CMT: Programming rm437_510.21.010.36U
Asic CMT: Programming 78%
Asic CMT: Programming 80%
Asic CMT: Programming 82%
Asic CMT: Programming 84%
Asic CMT: Programming 86%
Asic CMT: Programming 88%
Asic CMT: Programming 90%
Asic CMT: Programming 92%
Asic CMT: Programming 94%
Asic CMT: Programming 96%
Asic CMT: Programming 98%
Asic CMT: Programming RM437_ENO_008.07.45_100.71.952.a018.fpsx
Asic CMT: Programming 100%
Finished Flashing
Rebooting to RFS Mode
Asic CMT: Verifying communication to device...
Waiting for communication response: 25
Waiting for communication response: 24
Waiting for communication response: 23
Waiting for communication response: 22
Waiting for communication response: 21
Waiting for communication response: 20
Waiting for communication response: 19
Waiting for communication response: 18
Waiting for communication response: 17
Waiting for communication response: 16
Waiting for communication response: 15
Waiting for communication response: 14
Waiting for communication response: 13
Waiting for communication response: 12
Waiting for communication response: 11
Waiting for communication response: 10
Waiting for communication response: 9
Waiting for communication response: 8
Waiting for communication response: 7
Waiting for communication response: 6
Waiting for communication response: 5
Waiting for communication response: 4
Waiting for communication response: 3
Waiting for communication response: 2
Waiting for communication response: 1
Starting to recover the phone
Recoverying phone
Initializing
Error 0x8401F121 communicating to phone. Unable to verify comm.
Warning: Unable to communicate to product after flashing
Scanning image files...
ERROR: Unable to detect device 0x8401F145. Check USB connection
ERROR: Product recovery failed
Unable to set the phone to flash mode. Unable to flash.
Starting to recover the phone
Recoverying phone
Initializing
Scanning image files...
ERROR: Unable to detect device 0x8401F145. Check USB connection
ERROR: Product recovery failed
Unable to set the phone to flash mode. Unable to flash.
Starting to recover the phone
Recoverying phone
Initializing
Scanning image files...
ERROR: Unable to detect device 0x8401F145. Check USB connection
ERROR: Product recovery failed
Unable to set the phone to flash mode. Unable to flash.
Starting to recover the phone
Recoverying phone
Initializing
Scanning image files...
Phone recovery completed. Waiting for phone to boot up
Bootup successful
Verifying communication to product (before flash finalizing)
Communication verified
Verifying communication to product (before flash finalizing)
Failed to verfy communication to product
Verifying communication to product (before flash finalizing)
Failed to verfy communication to product
All operations completed
Firmware updating failed.


mong các bạn giúp với

[ĐẶNG BẢO_GSM™]

Cáp này chưa chuẩn
bạn thay cọng cáp khác đi chạy lại nhé
hôm trước gặp 1 em lỗi y như vậy chạy mãi not ok
thay cọng cáp khác ok luôn

[anhtamspeed]

bệnh này là do tháo pin ra làm nguồn bị sốc đột ngột để mai chạy xem sao..mình cũng gặp phải rôi chủ thớt ah.lên chạy 1 ver cao duy nhất thôi