[Xin giúp] 5230 Nokia khởi động chỉ rung

[tlpmobile_tk]

Lật sơ đồ ra coi từng áp cấp cho UPP và Flash cói thiếu áp nào không bạn hiền,AE không có máy trong tay hỗ trợ triệt để thì cũng hơi khó cho bạn chủ yếu là bạn vẫn phải tự thân vận động chúc bạn sớm thành công

[Tèo Mobile]

Log chạy die phoneix

Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
Loading secondary boot code: 15232 bytes
Secondary boot loaded
Loading update server code: 2639925 bytes
Update server loaded
Asic CMT: Verifying communication to device...
Asic CMT: Verifying communication to device...
Asic CMT: Start programming 148756 KB...
Asic CMT: Partitioning RM-588_50.9.002_prd.core.C00
Asic CMT: Partitioning area 1...
Asic CMT: Erasing RM-588_50.9.002_prd.core.C00
Asic CMT: Erasing area 1...
Asic CMT: Erasing area 2...
Asic CMT: Erasing area 3...
Asic CMT: Erasing area 4...
Asic CMT: Erasing area 5...
Asic CMT: Erasing partition 0x0000000A...
Asic CMT: Erasing RM-588_50.9.002_prd.rofs2.V25
Asic CMT: Erasing area 1...
Asic CMT: Erasing RM-588_50.9.002.562.01.rofs3.fpsx
Asic CMT: Erasing area 1...
Asic CMT: Erasing RM588_50.9.002_001_U562.uda.fpsx
Asic CMT: Erasing area 1...
Asic CMT: Programming RM-588_50.9.002_prd.core.C00
Asic CMT: Programming 0%
Asic CMT: Programming 2%
Asic CMT: Programming 4%
Asic CMT: Programming 6%
Asic CMT: Programming 8%
Asic CMT: Programming 10%
Asic CMT: Programming 12%
Asic CMT: Programming 14%
Asic CMT: Programming 16%
Asic CMT: Programming 18%
Asic CMT: Programming 20%
Asic CMT: Programming 22%
Asic CMT: Programming 24%
Asic CMT: Programming 26%
Asic CMT: Programming 28%
Asic CMT: Programming 30%
Asic CMT: Programming 32%
Asic CMT: Programming 34%
Asic CMT: Programming 36%
Asic CMT: Programming 38%
Asic CMT: Programming 40%
Asic CMT: Programming 42%
Asic CMT: Programming 44%
Asic CMT: Programming 46%
Asic CMT: Programming 48%
Asic CMT: Programming 50%
Asic CMT: Programming 52%
Asic CMT: Programming 54%
Asic CMT: Programming 56%
Asic CMT: Programming 58%
Asic CMT: Programming 60%
Asic CMT: Programming 62%
Asic CMT: Programming 64%
Asic CMT: Programming 66%
Asic CMT: Programming 68%
Asic CMT: Programming 70%
Asic CMT: Programming RM-588_50.9.002_prd.rofs2.V25
Asic CMT: Programming 72%
Asic CMT: Programming 74%
Asic CMT: Programming 76%
Asic CMT: Programming 78%
Asic CMT: Programming 80%
Asic CMT: Programming 82%
Asic CMT: Programming 84%
Asic CMT: Programming 86%
Asic CMT: Programming 88%
Asic CMT: Programming RM-588_50.9.002.562.01.rofs3.fpsx
Asic CMT: Programming 90%
Asic CMT: Programming 92%
Asic CMT: Programming 94%
Asic CMT: Programming RM588_50.9.002_001_U562.uda.fpsx
Asic CMT: Programming 96%
Asic CMT: Programming 98%
Asic CMT: Programming 100%
Asic CMT: Verifying communication to device...
Phone flashing completed. Waiting for phone to boot up
Bootup successful
Verifying communication to product (before flash finalizing)
Communication verified
Product code changed
Doing factorysets
Factorysets complete
Loading default data to phone
Loading default data to phone
Getting Data Package
Reading product state
Starting backup/restore sub-procedure: data item pre-delay
data item pre-delay
data item pre-delay
Sub-procedure completed: Succeeded., result code: 0
Starting to backup/restore data item: ProductProfile, version: 1.1
Data Item backup/restore completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item post-delay
data item post-delay
data item post-delay
Sub-procedure completed: Succeeded., result code: 0
Backup/restore result: 0 out of 1 items were not backed up
Default data loading complete
Stopping all operations, returning phone to default mode
All operations completed
Firmware updating succeeded.

[TÚ CÒI]

lock này đẹp đấy chứ.nếu tay nghề chuẩn.thử phang lại cặp coi sao

[tlpmobile_tk]

Log đẹp rồi bạn ngồi nghiên cứu sơ đồ rồi múc cứng thôi chúc sớm thu lúa

[suboi88]

múc upp đi bank ơi

[Tèo Mobile]

Đã đóng lại con N2200 rồi

[Tèo Mobile]

anh em xem giúp em với,flash USB hwk cũng Done ! Log đẹp mà ko lên,phần cứng hơi chuối ,nhờ các anh giúp

[TÚ CÒI]

bạn chắc chắn 100% là ko lên chứ.có mx-key cho vào seltest xem báo lỗi gì ko?

[Tèo Mobile]

Đây là Lod Buscheck Mxkey

MXKEY Serial: [FT SCR2000 0] - C0848EE9
Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Connection status: OHCI:HUB:HUB:USB 1.10 (Full-speed)
Driver: UFS2XX, ver: 3.6.0.0 , NTMP ver: 2.6.0.0
Module ver: 1.0.0.18624(06-08-2011), Library ver: 1.0.0.12274(06-08-2011)
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101051103 [RAPIDO3G ver: 1.15]
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 1C000218908E0052D5BD6C16BE187FBE19DD92F2
ASIC MODE ID: 00
ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
ROM ID: 4B9B75103E691FF8
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 9.50.0 revision: 2.0 size: 0x3B40
Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
eBB5ProtocolType: NEW
NewProtocol is not supported for current interface (UFS_USB V2.8 (c) SarasSoft 2007.).
Please select correct loader version from 'Config' menu !

[TÚ CÒI]

info được ko bạn hiền.thấy lock phoenix ngon vậy mà