CMT SOS*DSP0 block sent
CMT LDSP block sent
CMT SOS*ISASW block sent
CMT SOS+CORE block sent
Programming completed in 5.844 s
Processing PPM file: RM-816_20.6.039_prd.rofs2.V01
[BB5,XSR 1.6] size: 23.88 MB
Supported Ids: 600C192102031104
Erase size: 33.44 MB
CMT FLASH,MuxOneNAND area [077D0000-0993FFFF]
Flash programming ...
CMT SOS+ROFS2 block sent
Programming completed in 4.593 s
Processing PPM file: RM-816_20.6.039_C02_prd.rofs3.fpsx
[BB5,XSR 1.6] size: 1.90 MB
Supported Ids: 600C192102031104
Erase size: 10 MB
CMT FLASH,MuxOneNAND area [09940000-0A33FFFF]
Flash programming ...
CMT SOS+ROFS3 block sent
Programming completed in 0.437 s
Processing CNT file: RM814_815_816_002_U001.uda.fpsx
[BB5,XSR 1.6] size: 8.60 MB
Supported Ids: 600C192102031104
Erase size: 79.25 MB
CMT FLASH,MuxOneNAND area [0A340000-0F27FFFF]
Flash programming ...
Programming completed in 1.828 s
Total time for flashing process(boot+erase+write) was 25.016 s
Waiting for USB device removal ...OK
Waiting for USB device arrival ...OK
Waiting for device boot up ...
Device connected: nmwcdc\Nokia USB Phonet, PORT_ID: 222C7157
Verifying communication to device OK.
Phone type: RM-816 (Nokia C5-06)
SW version: V ICPR82_11w25.1 13-07-11 RM-816 (c) Nokia
Imei plain: 35829504247397-9
Product code: 059L791
Battery voltage: 3707 mV, current: 210 mA
ApeCoreSw: V 20.6.039
Language Pack:
- not available.
SLPA ver[5]: PA_SIMLOC30 (20 digit NCK)
warning: avoid SW Downgrade & manual erase to this phone !
SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST passed
Imei net: 358295042473979
Version: SIMLOCK SERVER
Counter: 0/3, 0/10
CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000
BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
FULL FACTORY... OK
Completed in 1.672 s
FULL FACTORY... OK
USER DATA... OK
LEAVE FACTORY... OK
SERVICE CENTER... OK
SOFTWARE UPGRADE... OK
PRODUCTION TUNING... OK
Reset User Code (to default:12345) ... OK
Completed in 1.156 s