[Xin giúp] nokia X2-03 lỗi phần mềm . Bật nguồn lên nokia rồi tắt

[anhnguyen_st]

mình đã chạy bằng MX-BOX nhưng không factorry set được . mọi người xem giúp nguyên nhân . cảm ơn ! đây là những gì đã chạy :
Version from phone: 07.16
Version from file: 07.16
MXKEY [MxKey Team HTI PLUS Flasher Interface 6], SN: C085E8AE
Using device: HTI, FW ver: 00.50, SN: 01006B41
Connection status: EHCI:HUB:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.20454(13-03-2012), Library ver: 1.0.0.13962(12-03-2012)
Rpl backup already exist (C:\mobileEx\3.5\data\backup\BB5_35376404862510_BA CK.rpl).
CMT Data :
SYSTEM ASIC ID: 000000030000022600010007600C192102031104 [RAPUYAMA ver: 1.1]
EM0 ID: 00001051
EM1 ID: 00001060
PUBLIC ID: 0C200113F2A8034417F6901210D6226EFCF46C83
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
SecondaryBoot: RAPUv11_2nd.fg [BB5] version: 11.48.0 revision: 3.0 size: 0x3B40
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
eBB5ProtocolType: NEW
TransmissionMode: DDR&TX2
Storage0: 0000 0000 - 0000 0000 type: RAM, asic:CMT
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
Storage2: 0000 0000 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage3: 0000 0001 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage4: 00EC 0030 - 0000 0431 [Samsung K5W1G13ACM-DJ60,1 Gbits] type: FLASH,MuxOneNAND, asic:CMT
Suggested algorithm: XSR 1.6
Algorithm: RAPUv11_XSR17_alg.fg [XSR 1.6] version: 11.48.0 revision: 3.0 size: 0xD4069
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
TransmissionMode: DDR&TX2
FUR: Adding Asic CMT as client OK
CMT PAPUBKEYS HASH: 23B57C26A0C7A9C34544727AA1D2FC8F3265329C
Processing MCU file: rm639__07.16.mcusw
[BB5,XSR 1.6] size: 30.62 MB
Supported Ids: 0003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 600C192102031104, 6003192102031104
Storing certificate [NPC, CCC, HWC, R&D] ...OK
Partitioning ...OK
Erase size: 45.06 MB
CMT FLASH,MuxOneNAND area [00020000-000203FF]
CMT FLASH,MuxOneNAND area [00060000-0009FFFF]
CMT FLASH,MuxOneNAND area [000A0000-0041FFFF]
CMT FLASH,MuxOneNAND area [00420000-0069FFFF]
CMT FLASH,MuxOneNAND area [006A0000-006DFFFF]
CMT FLASH,MuxOneNAND area [006E0000-0123FFFF]
CMT FLASH,MuxOneNAND area [02060000-020BFFFF]
CMT FLASH,MuxOneNAND area [02CC0000-0333FFFF]
CMT FLASH,MuxOneNAND area [07540000-07B3FFFF]
CMT FLASH,MuxOneNAND area [01240000-0205FFFF]
Formating partition ...
Prog.status for Asic CMT ...
NAND: OK
Flash programming ...
CMT ADA block sent
CMT KEYS block sent
CMT PRIMAPP block sent
CMT PASUBTOC block sent
CMT PAPUBKEYS: 23B57C26 [RAP Certificate v1 260] sent
CMT RAP3NAND block sent
CMT UPDAPP block sent
CMT LDSP block sent
CMT DSP0 block sent
CMT MCUSW block sent
CMT MCUSW1 block sent
CMT GENIO_INIT block sent
CMT ISA+DYNSW block sent
Prog.status for Asic CMT ...
NAND: OK
Programming completed in 51.031 s
Processing PPM file: rm639__07.16.ppm_v
[BB5,XSR 1.6] size: 8.66 MB
Supported Ids: 0003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 600C192102031104, 6003192102031104
Partitioning ...OK
Erase size: 12 MB
CMT FLASH,MuxOneNAND area [020C0000-02CBFFFF]
Prog.status for Asic CMT ...
NAND: OK
Flash programming ...
Prog.status for Asic CMT ...
NAND: OK
Programming completed in 14.515 s
Processing CNT file: rm639__07.16.image_v_0598418_009
[BB5,XSR 1.6] size: 35.09 MB
Supported Ids: 0003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 600C192102031104, 6003192102031104
Partitioning ...OK
Erase size: 66.06 MB
CMT FLASH,MuxOneNAND area [03340000-0753FFFF]
Formating partition ...
Prog.status for Asic CMT ...
NAND: OK
Flash programming ...
Prog.status for Asic CMT ...
NAND: OK
Programming completed in 58.640 s
Total time for flashing process(boot+erase+write) was 2 min 16.469 s

After Flash Processing ...
Reseting Factory Values OK.

Phone type: RM-639 (Nokia X3-02)
SW version: V 07.16 13-01-12 RM-639 (c) Nokia
Imei plain: 35376404862510-1
Product code: 0598431
Battery voltage: 4377 mV, current: 71 mA
Language Pack:
- not available.

SLPA ver[5]: PA_SIMLOC30 (20 digit NCK)
warning: avoid SW Downgrade & manual erase to this phone !
Camera config: 0A4E2007008005, ver:

SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST passed


Imei net: 353764048625101
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
FULL FACTORY... Failed! (0102)
Completed in 4.515 s

[SƠN CÒI_GSM]

dòng này kẹp dòng không đc đâu bạn nhé thử test bằng pin xem sao bạn

[vietanh04]

bỏ pin vào vẫn không lên bạn thử thay con 47k xem thế nào nhé

[KHA_MOBILE67]

anh lấy hợp khác mà múc thử cái xem sau anh

[nhotrung_bn]

Máy không đồng bộ được ro bạn chạy vẻ thấp hơn ver của máy hiện tại hoặc là máy không ở chế độ test mode. anh thử download vẻ cao nhất flash lại coi và khi chạy song anh có thể nhấp nhấp nguồn giúp máy về chế độ test mode nếu ko được thì kiểm tra HW

[ĐẶNG BẢO_GSM™]

Kiếm ver cao hơn ver cũ của nó chạy lại là done
không thì chiến die usb bằng phoenix là được

[anhnguyen_st]

lúc đầu mình kiểm tra ver : 7.16 . mình chạy bằng ver cũ của máy . mà trên navifilm cũng thấy chỉ có 7.16 là cao nhất thôi . thử làm theo TVS_88 xem sao . có khi phải chạy bằng pin thật . anh em ai có ver cao hơn 7.16 thì cho mình xin với . cảm ơn nhiều ! có gì mình sẽ báo kết quả sau . ok

[anhnguyen_st]

kết quả chạy bằng phoenix như sau :
Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
Loading secondary boot code: 15168 bytes
Secondary boot loaded
BB Asic Index is: 00
Asic ID is: 000000030000022600010007600C192102031104
BB Asic Index is: 00
EM Asic ID is: 00001051
BB Asic Index is: 00
EM Asic ID is: 00001060
BB Asic Index is: 00
Public ID is: 0C200113F2A8034417F6901210D6226EFCF46C83
BB Asic Index is: 00
Asic Mode ID: 00
BB Asic Index is: 00
Hash: 916F75217F32081248B15C38DFC8E81B
BB Asic Index is: 00
ROM ID: E693EF0DAC22615B
BB Asic Index is: 00
Device type is: 05
Device Index is: 00
Manufacturer code: 0000
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 04
Device Index is: 00
Manufacturer code: FFFF
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 00
Device Index is: 00
Manufacturer code: 0000
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 00
Device Index is: 01
Manufacturer code: 0000
Device ID: 0001
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 03
Device Index is: 00
Manufacturer code: 00EC
Device ID: 0030
Extended device ID: 0000
Revision ID: 0431
Loading update server code: 811683 bytes
Update server loaded
Partitioning....
Partitioning complete
Erasing....
Erasing complete
Asic CMT: Start programming 75918 KB...
Asic CMT: Programming data sent: 0%
Asic CMT: Programming data sent: 10%
Asic CMT: Programming data sent: 20%
Asic CMT: Programming data sent: 30%
Asic CMT: Programming data sent: 40%
Asic CMT: Programming data sent: 50%
Asic CMT: Programming data sent: 60%
Asic CMT: Programming data sent: 70%
Asic CMT: Programming data sent: 80%
Asic CMT: Programming data sent: 90%
Asic CMT: Programming data sent: 100%
Programming complete
Asic CMT: programming succeeded
Asic CMT: Verifying communication to device...
Waiting for communication response: 25
Waiting for communication response: 24
Waiting for communication response: 23
Waiting for communication response: 22
Waiting for communication response: 21
Waiting for communication response: 20
Waiting for communication response: 19
Waiting for communication response: 18
Waiting for communication response: 17
Waiting for communication response: 16
Waiting for communication response: 15
Waiting for communication response: 14
Waiting for communication response: 13
Waiting for communication response: 12
Waiting for communication response: 11
Waiting for communication response: 10
Waiting for communication response: 9
Waiting for communication response: 8
Waiting for communication response: 7
Waiting for communication response: 6
Waiting for communication response: 5
Waiting for communication response: 4
Waiting for communication response: 3
Waiting for communication response: 2
Waiting for communication response: 1
Starting to recover the phone
Recoverying phone
Initializing
Error 0x8401F121 communicating to phone. Unable to verify comm.
Warning: Unable to communicate to product after flashing
Scanning image files...
Unable to set the phone to flash mode. Unable to flash.
All operations completed
Product flashing aborted

chắc phải tháo ra làm phần cứng quá . nhưng cũng chưa có sơ đồ . anh em ai có sơ đồ cho mình xin với nhé . cảm ơn nhiều !

[ThanhTuMobile]

chiến = HWK or ATF thư lại cái xem sao rồi hẩy lần HW sau

[anhnguyen_st]

mang qua ATF cũng không được . chắc phải kiếm ver cao hơn quá . anh em ai có cho mình xin với . cảm ơn nhiều !