[Xin giúp] 3110c lổi pm

[vvaodoi1980]

================================================
Basic Phone Information
================================================
MCU Version: V 07.30 07-05-09 RM-237 (c) Nokia.
IMEI Plain : 356852028912552
IMEI Spare : A356852028912550
IMEI SV : 33568520289125527F
Phone Model: Nokia 3110c
Category : Classic Phone
Phone Type : RM-237

================================================
Extended Phone Information
================================================
Product Serial Number: 7F0821634
Product Code : 0514950
Module Code : 0203291
Basic Production Code: 0542523
PPM SW Version : V 07.21 05-11-08 RM-237 (c) Nokia. V
BT MCM Version : 06cc-P9.1
MCU SW Version : V 07.30 07-05-09 RM-237 (c) Nokia.
HW Version : 2000
RFIC Version : 17211721
DSP Version : ICPR61_08w10
AHNE Version : 11
RETU Version : 32
TAHVO Version : 53
Bluetooth ID : 00:24:03:32:FF:AE
CS Type : GSM900, GSM1800, GSM1900

================================================
Simlock Information
================================================
CONFIG KEY : 0000000000000000
PROVIDER KEY : 2440700000000000
NETWORK NAME : Nokia Default;Finland
LOCK COUNTERS : KEYPRESS 0/3, FBUS 0/10
SIMLOCK TABLE :
Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
SIMLOCK STATE : Not Locked

SIMLOCK_TYPE : PA_SL1
SIMLOCK_TEST : PASSED
SECURITY_TEST : FAILED
> Try SX4 "PM AUTH"
> Then Write PM 1 and 309
SECURITY_CODE : 12345
PHONE_MODE : TEST


Make sure you have installed the
COMPLETE Flash Package for this Phone...

Goto "Settings" --> "Nokia Settings" and verify that
the Folder where you installed your Flash Files are
in the "PRODUCT PATH TO SCAN" List...
anh em nào rành về atf gúp mình repiar với
xưa nay làm bằng mx box mà bi lôiir rồi

[A & T Mobile]

SECURITY_TEST : FAILED
> Try SX4 "PM AUTH"
> Then Write PM 1 and 309
nó đề suất phương án cho bác sửa lỗi rồi đó

[thuykieu90]

bạn dùng toot best sao bạn ?

[hachanyen]

lh yahoo mình làm cho

[QuangNinhGSM]

chọn file sóng PM chuẩn rùi pang

[TuệNguyễn]

SECURITY_TEST : FAILED
> Try SX4 "PM AUTH"
> Then Write PM 1 and 309

vào tap PM Write pm1 & 309 là done.

[Trường_Mobile]

box gì mà hay vậy nó chỉ luôn cách sửa lỗi rồi đó bác múc đi thôi

[Nguyễn Khang]

Chắc chủ thớt làm xong ok, lấy tiền của khách nên quên ae luôn rồi

[Trần Gia_Store]

lỗi vùng số 1 & 309 write phát ăn ngay

[sau666_gsm]

chủ thớt lánh $ đi nhậu rồi hay sao ý ! mấy anh trên chỉ bảo y ngay rằng là chuẩn