1202 mất nguồn cần giúp

[ĐƠ_NGUYỄN]

em đã đóng lại nguồn , u , flash, bây giờ chạy phần mềm báo lỗi thế này máy vẫn còn dao động, nhờ mấy pro giúp, thankssssssssssssss

[GIA NGUYỄN_MOBILE]

bây giờ chạy phần mềm báo lỗi thế này

Lỗi thế nào đâu bạn ??????

[ĐƠ_NGUYỄN]

đây nè anh

MXKEY Serial: [MxKey Team HTI Flasher Interface (WinUSB) 4] - C0855D93
Using device: HTI BOX, FW ver: 00.17
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.0.0
Module ver: 1.0.0.18624(06-08-2011), Library ver: 1.0.0.12274(06-08-2011)
ASIC ID: 0x2293 [UPPCosto ver: 2.0]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 8828 [ST 58WR032FU,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 2310 0340 C605 E401 20A2 6514
Algorithm: u3_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C30
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...ASIC type: 11
UEM Imei: Empty
Flash Imei: 35606703793912
RPL saved to "C:\mobileEx\3.5\data\backup\RPL\_BACK.rpl"
Processing MCU file: rh112_004.030
[DCT4,DCT4 ALGORITHM] size: 2.29 MB
Supported Ids: 2293
ASIC ID: 0x2293 [UPPCosto ver: 2.0]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 8828 [ST 58WR032FU,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 2310 0340 C605 E401 20A2 6514
Algorithm: u3_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C30
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...Area [01000000-0100FFFF] erased in 0.906 s
Area [01010000-013AFFFF] erased in 53.469 s
Area [013B0000-013EFFFF] erased in 3.610 s
Area [017C0000-017EFFFF] erased in 0.078 s
Area [01FC0000-01FEFFFF] erased in 0.062 s
Flash programming ...
Programming completed in 14.141 s
File Processed in 1 min 23.735 s
Processing CNT file: rh1120_nai04.03mr
[DCT4,DCT4 ALGORITHM] size: 110.54 KB
Supported Ids: 2293
ASIC ID: 0x2293 [UPPCosto ver: 2.0]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 8828 [ST 58WR032FU,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 2310 0340 C605 E401 20A2 6514
Algorithm: u3_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C30
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...Area [01380000-013AFFFF] erased in 2.766 s
Flash programming ...
Programming completed in 0.735 s
Content extract fail, continue anyway ...
File Processed in 8 min 55.406 s
Processing PPM file: rh112_004.03mr
[DCT4,DCT4 ALGORITHM] size: 1.15 MB
Supported Ids: 2293
Boot error: CC CC CC 00
- Repeat the procedure. Sometimes it is a matter of temporary communication problem or similar.
- Check that all used cable are solid without any visible damage and have good contact. If possible, try with other cables.
- On rare occasions phone might be damaged or dead. So, if possible, try with another phone.
flashing terminated !
Task failed at (0800002A)!!!
Last RX buffer: 02 00

[ĐƠ_NGUYỄN]

máy bị rớt nước.

[GIA NGUYỄN_MOBILE]

Check that all used cable are solid without any visible damage and have good contact. If possible, try with other cables.

Check lại cáp khác đi bạn

[xuananh00]

sao ko đo xem mạch của mh có đứt ko nhỉ???

[SỸ HẢI_mobile]

lỗi như vậy phần đa là gio cáp kiẻm tra cáp chạy ok mà ko lên thì xem lại màn hình

[vanthienmobile]

kiểm tra thật kỹ màn socket màn hình xem có đủ 2 áp không có đủ thì thay thử màn khác chưa gì đã vội làm ic sớm thế bạn

[ĐƠ_NGUYỄN]

anh oi, không có điện áp cho mh.

[ĐƠ_NGUYỄN]

làm ơn cho em xin mạch đèn 1202