N96 khởi động treo cần giúp

[quocchuong566]

Máy rớt nước đã vệ sinh kỹ rồi. nay khởi động máy rung 1 cái rồi treo luôn. Mong anh em trong 4Rum giúp cám ơn

cho vô box, rồi đưa cái logo lên coi bạn

[mobileclock]

MT-BOx check ra log như dưới:

" MTBOX: 00979a6307 - Nokia Flash/Repair v1.60
Box: CR V 1.002 256
Code: NK V 1.001 1049
SN: 00979a6307
Nokia Unlimited: 3317 times started
SonyEricsson Trial: 10 left, each max 15min
============= Set Flash mode for info =============
Boot...
Using Tx2 Data line.
Trying boot BB5 phone...

RAPIDOv11_2nd.fg
RAPIDOv11_algo.fg
BOOT OK...
Phone Type: BB5
------------------- SYSTEM ID Response: 7 blocks -------------
SYSTEM_ASIC_ID( RAP ):
000000010000022600010006400C192101031103
EM_ASIC_ID( RAP ):
00000295
EM_ASIC_ID( RAP ):
00000B22
PUBLIC_ID( RAP ):
03A00003E071005236B506C1AABA58183836ADA3
ASIC_MODE_ID( RAP ):
00
ROOT_KEY_HASH( RAP ):
CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM_ID( RAP ):
4B9B75103E691FF8
--------------- Device ID Response: 3 blocks -------------
Storage Device:
Owner Asic: RAP
Type: NOR Flash
Index: 0
Flash: SGS, 0020 8804 0000 6B21
Storage Device Contents:
Owner Asic: RAP
000000000000000000000000000000000000
============= Set FBus mode for info =============
VBat is 3.91V

Vpp pin has 0.10V, Not Connected
Pins:
Mbus 1, Box Tx 1, Box Rx 1, Bsi 0
Phone is in: Local mode
Scanning files, please wait...
Done
Selected Highest installed version: 30.033
Mcu RM-247_30.033_prd.core.fpsx
Ppm RM-247_30.033_019.1_prd.language.fpsx
Ppm RM-247_30.033_098.1_prd.customer.fpsx
Content RM-247_30.033_100.1_prd.uda.fpsx
MemoryCardContent
RM247_004_000_M002.fpsx
Model: RM-247 (N96)
V ICPR72_08w35.1/04-09-08/RM-247 (c) Nokia
IMEI: 354863024202122 "


Nhưng khi flash thì báo như bên dưới:


" VPP is DISABLED.
Using Tx2 Data line.
Processing File: RM-247_30.033_prd.core.fpsx
Boot...
FAILED TO BOOT PHONE!!!
Make sure that phone is connected. "

Mong cho ý kiến. Cám ơn