UMTv2 / UMT Pro -Ultimate Multi Tool update new here

[namnhatrang]

[15-08-24] UMTv2/UMTPro QcFire v10.6 - Samsung Continues...



We are pleased to announce
UMTv2 / UMT Pro
Innovative and Intelligent


QcFire v10.6
The Ultimate Qualcomm Tool




Supported Functions
- Read / Write Firmware
- Backup / Restore QCN
- IMEI Repair in FTM/Diag + Flash Mode
- Backup / Reset / Restore Security (EFS)
- Reset FRP (Google Factory Reset Protection)
- Format UserData
- Read Pattern Lock (Android < 6.0, Un-Encrypted Devices Only)
- Reset Locks (PIN, Password, Pattern w/o Data Loss, Un-Encrypted Devices Only)
- Enable Diag (Need OEM Unlock, May not work on BL Locked Devices)
- Reboot to EDL from Fastboot
- Reset Mi Account for Xiaomi Devices
- Disable Mi Account for Xiaomi Devices
- Factory Reset (sideload Mode) for Xiaomi Devices
- Disable / Restore Locks for Encrypted Userdata
- Motorola Boot Repair
- Xiaomi EDL Locked Device Service
- Bootloader Unlock in EDL Mode for some Xiaomi Devices
- One Click Root in EDL Mode for Generic Qualcomm Devices
- Forensic Functions (Read Contacts / Messages in EDL Mode)
- One Click Lock Reset for Vivo Phones (Encrypted Userdata)
- Factory Method for Format FS
- EDL Authentication using Xiaomi Auth App (Service Account Required)
- Xiaomi Wipe EFS in Sideload Mode
- Xiaomi IMEI Repair for RSA Protected Phones
- Xiaomi Boot Loader Unlock
- Unique Method for Vivo Reset Locks for Protected Devices
- Xiaomi EDL Auth Using UMT Server
- Xiaomi Flashing in Fastboot Mode
- Nokia Factory Firmware (nb0) Direct Flashing in EDL mode
- Oppo OFP Firmware Exctration Added
- Xiaomi Free Auth Service (bypass).
- Mi Account Reset without Relock
- Mi Account Patch on Flashing (EDL/Fastboot)
- Samsung MDM Unlock in EDL Mode
- Huawei ID Reset
- Vivo Functions in Fastboot Mode
- Universal Huawei ID Reset
- Xiaomi Sideload Reset FRP/Mi Account
- Xiaomi Sideload Firmware Update
- Xiaomi Temporary BL Unlock
- Xiaomi Enable Diag (NO ROOT)
- Samsung Lost Mode Reset in EDL Mode
- Samsung KG Bypass
- Samsung Unbrick / Dead Boot Repair
- Samsung TAR to Unbrick Firmware Creator
- Xiaomi Auth Bypass For Newer Devices



What's New:


Huawei
- nova 10 SE (BNE-LX3)
- nova 12 SE (BNE-LX1)

JioPhone
- Next

OnePlus
- 9

Orbic
- MAUI (RC545L)

Samsung
- Galaxy A05s (SM-A057F) BIT3
- Galaxy M01 (SM-M015G) BIT5
- Galaxy M11 (SM-M115F) BIT3
- Galaxy M23 (SM-M236L) BIT3
- Galaxy M23 (SM-M236L) BIT4
- Galaxy M23 (SM-M236L) BIT5
- Galaxy M23 (SM-M236L) BIT6
- Galaxy S21 5G (SM-G991U) BITA
- Galaxy S21 FE (SM-G990U) BITC
- Galaxy S21 FE (SM-G990U2) BITA
- Galaxy S22 Ultra 5G (SM-S908E) BITA
- Galaxy S23 Ultra 5G (SM-S918B) BIT6
- Galaxy S24 Ultra (SM-S928B) BIT3
- Galaxy S24 Ultra 5G (SM-S928N) BIT2
- Galaxy Tab A7 WiFi (SM-T500) BIT8
- Galaxy Z Flip 6 5G (SM-F741B) BIT1
- Galaxy Z Fold 6 5G (SM-F956B) BIT1

Xiaomi
- Black Shark 4
- Redmi Note 11 NFC (spesn)


Updated Internal Database with more HWID and Hashes









CONNECTION METHOD FOR SAMSUNG:
Method to connect some Samsung Devices is already in Log.
For newer devices, do the following:
- Hold VOL UP + DOWN on Device.
- Hold Button on EDL Cable.
- Insert Cable to Device while holding EDL Cable Button.
- Now rapidly click both VOL UP + DOWN at the same time.
- Once you have clicked VOL UP + DOWN more than 3 times, leave EDL Cable Button but keep rapidly clicking VOL UP + DOWN.
- Stop clicking VOLUME Buttons once device is connected in EDL Mode.






Special thanks to all our users who helped us with their test reports.



Please use UMT Card Manager to Update Card Counter / Firmware / Activate Add-on, available via Support Access.



It Has Begun...
Keep Following Us...
Some Nice Updates Are On The Way...


SPECIAL THANKS TO OUR VALUABLE USERS FOR THEIR LOVE AND SUPPORT FOR MORE THAN 8 YEARS



WARNING :
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.


ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.

STATUTORY WARNING - READ CAREFULLY
Using International Edition of our software is prohibited by Indian Law.
We strictly advice you to use Indian Edition if you are in India.
If you use International Edition in India, it may cause legal action against you by local law enforcement agencies.
We will not be liable for any loss or damaged caused.



How to Download:
- Download UMT Support Access.
- Connect UMT Box/Dongle to PC and Run UMT Support Access.
- Download required Executable from Installer folder.
- Enjoy!
- Download Mirrors



PLEASE DO NOT POST OFF TOPIC HERE. ONLY POST REGARDING THIS UPDATE AND SUPPORTED MODELS. ANY OFF TOPIC POST WILL BE DELETED


Telegram


Br,
UMT

[namnhatrang]

[24-08-24] UMTv2/UMTPro QcFire v10.7 - Samsung KG Unlock and more...


We are pleased to announce
UMTv2 / UMT Pro
Innovative and Intelligent


QcFire v10.7
The Ultimate Qualcomm Tool




Supported Functions
- Read / Write Firmware
- Backup / Restore QCN
- IMEI Repair in FTM/Diag + Flash Mode
- Backup / Reset / Restore Security (EFS)
- Reset FRP (Google Factory Reset Protection)
- Format UserData
- Read Pattern Lock (Android < 6.0, Un-Encrypted Devices Only)
- Reset Locks (PIN, Password, Pattern w/o Data Loss, Un-Encrypted Devices Only)
- Enable Diag (Need OEM Unlock, May not work on BL Locked Devices)
- Reboot to EDL from Fastboot
- Reset Mi Account for Xiaomi Devices
- Disable Mi Account for Xiaomi Devices
- Factory Reset (sideload Mode) for Xiaomi Devices
- Disable / Restore Locks for Encrypted Userdata
- Motorola Boot Repair
- Xiaomi EDL Locked Device Service
- Bootloader Unlock in EDL Mode for some Xiaomi Devices
- One Click Root in EDL Mode for Generic Qualcomm Devices
- Forensic Functions (Read Contacts / Messages in EDL Mode)
- One Click Lock Reset for Vivo Phones (Encrypted Userdata)
- Factory Method for Format FS
- EDL Authentication using Xiaomi Auth App (Service Account Required)
- Xiaomi Wipe EFS in Sideload Mode
- Xiaomi IMEI Repair for RSA Protected Phones
- Xiaomi Boot Loader Unlock
- Unique Method for Vivo Reset Locks for Protected Devices
- Xiaomi EDL Auth Using UMT Server
- Xiaomi Flashing in Fastboot Mode
- Nokia Factory Firmware (nb0) Direct Flashing in EDL mode
- Oppo OFP Firmware Exctration Added
- Xiaomi Free Auth Service (bypass).
- Mi Account Reset without Relock
- Mi Account Patch on Flashing (EDL/Fastboot)
- Samsung MDM Unlock in EDL Mode
- Huawei ID Reset
- Vivo Functions in Fastboot Mode
- Universal Huawei ID Reset
- Xiaomi Sideload Reset FRP/Mi Account
- Xiaomi Sideload Firmware Update
- Xiaomi Temporary BL Unlock
- Xiaomi Enable Diag (NO ROOT)
- Samsung Lost Mode Reset in EDL Mode
- Samsung KG Bypass
- Samsung Unbrick / Dead Boot Repair
- Samsung TAR to Unbrick Firmware Creator
- Xiaomi Auth Bypass For Newer Devices

What's New:

Huawei
- Nova 10 (NCO-LX1)

Mason
- D450 (C1)

Samsung
- Galaxy A23 5G (SM-S236DL) BIT9
- Galaxy A70 (SM-A705FN) BIT5
- Galaxy M55 (SM-M556B) BIT2
- Galaxy S21 5G (SM-G991U) BIT-C
- Galaxy S21 Ultra 5G (SM-G998U) BIT-A
- Galaxy S21 Ultra 5G (SM-G998U) BIT-C
- Galaxy S21+ 5G (SM-G996U) BIT-C
- Galaxy S22 5G (SM-S901U) BIT6
- Galaxy S22+ 5G (SM-S906E) BIT-A
- Galaxy S22+ 5G (SM-S906U) BIT6
- Galaxy S23 (SM-S911B) BIT6
- Galaxy S23 (SM-S911W) BIT2
- Galaxy S23 FE (SM-S711U) BIT5
- Galaxy S24 Ultra (SM-S9280) BIT3
- Galaxy Z Fold 3 (SM-F926U) BIT5

Xiaomi
- Mi 10 (umi)
- Redmi Note 8T (willow)
- Redmi Y3 (onc)




Samsung KG Unlock (Samsung Special Group)
- Once operation finished, enter download mode.
- It will say KG : BROKEN
- You need to flash ZTO CSC (Brazil)
- You must have ZTO CSC Firmware for your device firmware version
- This method may not work on all devices.




Samsung OEM Unlock (Samsung Special Group)
- After Process is done by software, you need to enter download mode.
- Perform official method (eg. hold Vol UP for few seconds) for Unlock.
- You must perform OEM Unlock to write Knox Patched Firmware.
- This must be done without booting to operating system.
- This method may not work on all devices.


Added New HWID and Hashes to Internal Loader Database












CONNECTION METHOD FOR SAMSUNG:
Method to connect some Samsung Devices is already in Log.
For newer devices, do the following:
- Hold VOL UP + DOWN on Device.
- Hold Button on EDL Cable.
- Insert Cable to Device while holding EDL Cable Button.
- Now rapidly click both VOL UP + DOWN at the same time.
- Once you have clicked VOL UP + DOWN more than 3 times, leave EDL Cable Button but keep rapidly clicking VOL UP + DOWN.
- Stop clicking VOLUME Buttons once device is connected in EDL Mode.






Special thanks to all our users who helped us with their test reports.



Please use UMT Card Manager to Update Card Counter / Firmware / Activate Add-on, available via Support Access.



It Has Begun...
Keep Following Us...
Some Nice Updates Are On The Way...


SPECIAL THANKS TO OUR VALUABLE USERS FOR THEIR LOVE AND SUPPORT FOR MORE THAN 8 YEARS



WARNING :
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.


ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.

STATUTORY WARNING - READ CAREFULLY
Using International Edition of our software is prohibited by Indian Law.
We strictly advice you to use Indian Edition if you are in India.
If you use International Edition in India, it may cause legal action against you by local law enforcement agencies.
We will not be liable for any loss or damaged caused.



How to Download:
- Download UMT Support Access.
- Connect UMT Box/Dongle to PC and Run UMT Support Access.
- Download required Executable from Installer folder.
- Enjoy!
- Download Mirrors



PLEASE DO NOT POST OFF TOPIC HERE. ONLY POST REGARDING THIS UPDATE AND SUPPORTED MODELS. ANY OFF TOPIC POST WILL BE DELETED


Telegram


Br,
UMT

[namnhatrang]

NCK Box Premium v2 / UMT Pro MTK Preloader v1.1 Released - [05/09/2024]



MTK Exploit Tool v1.1

Added MTK V6 Support Preloader Exploit

• MT6789
• MT6835
• MT6895
• MT6983
• MT6985

1. Reset FRP
2. Format Userdata

Added MT6835 Preloader Exploit (OPPO V2)

• Realme 11 5G
• Realme 11x 5G
• Realme 12 5G
• Realme 12x 5G

Added MT6985 Preloaer Exploit (OPPO V2)

• Oppo Find N3 Flip
• Oppo Find X6

Added Vivo Demo Reset

• Vivo T2x 5G (Tested)
• Vivo Y28 5G (Tested)

Added Xiaomi Preloader Exploit

Supported Models:

• Redmi A3 (blue)
• Redmi 13C (gale)
• Redmi Note 13 5G (gold)
• Redmi Note 13R Pro (gold)
• POCO C65 (gale)
• POCO X6 Neo 5G (gold)

1. Reset FRP
2. Format Userdata

Still Don’t have NCK ?

Do you have UMT?

Now you can activation NCK Box Premium v2 on UMT Cards
so you can use it with out shipping costs without limits


Official Website:

NCK Box
NCK Dongle
NCK Pro


Official Shop:
https://fastunlocking.com/shop/en/


Payments by

• Credit Card via Stripe gateway
• Paypal
• Credit Card via Paypal
• Credit Card via Google Pay
• Credit Card via Apple Pay

Download From Support Area


OR

https://drive.google.com/file/d/1il7...usp=drive_link


Password for Zip:

NckTeam

[namnhatrang]

[07-09-24] UMTv2/UMTPro UltimateMTK2 v1.5 - Infinix 2024 Preloader Exploit and more..




UMTv2 / UMT Pro
Innovative and Intelligent


UltimateMTK2 v1.5
The Ultimate MediaTek Tool


What's New:

Added Infinix/Itel/Tecno V4 (2024) Preloader Exploit
- Supported Chipsets:
- MT6761
- MT6765
- MT6768
- MT6833
- MT6891/MT6893
- Read/Write Firmware/Format FS/FRP


Following Models should be working:
- Infinix GT 10 Pro (X6739)
- Infinix Hot 10i (X658B)
- Infinix Hot 20 5G (X666C)
- Infinix Hot 20 Play (X6825)
- Infinix Hot 20i (X665E)
- Infinix Hot 30 (X6831)
- Infinix Hot 30 5G (X6832)
- Infinix Hot 30 Play NFC (X6835B, X6835)
- Infinix Hot 40 (X6836)
- Infinix Note 11 (X662, X662B, X662F)
- Infinix Note 11 Pro (X697)
- Infinix Note 11i (X663, X663B, X663C)
- Infinix Note 11s (X689)
- Infinix Note 11 (X689F)
- Infinix Note 12 (X6817)
- Infinix Note 12 5G (X671)
- Infinix Note 12 Pro 5G (X671B)
- Infinix Note 12i (X6819)
- Infinix Note 30 5G (X6711)
- Infinix Note 30 VIP (X6710)
- Infinix Note 30i (X6716B)
- Infinix Zero 30 (X6731)
- Tecno Camon 12 (CC7)
- Tecno Camon 12 Air (CC6)
- Tecno Camon 12 Pro (CC9)
- Tecno Camon 15 (CD7)
- Tecno Camon 15 Air (CD6)
- Tecno Camon 15 Premier (CD8j)
- Tecno Camon 15 Pro (CD8)
- Tecno Camon 16 (CE7, CE9H)
- Tecno Camon 16 Pro (CE8)
- Tecno Camon 16 SE (CE7J)
- Tecno Camon 17 (CG6, CG6J)
- Tecno Camon 17P (CG7, CG7N)
- Tecno Camon 18 (CH6, CH6N)
- Tecno Camon 18T (CH6T)
- Tecno Camon 18T (CH6T)
- Tecno Camon 19 (CI6, CI6H)
- Tecno Camon 19 Neo (CH6I)
- Tecno Camon 19 Pro 5G CI7n)
- Tecno Camon 20 (CK6)
- Tecno Camon 20 Premier (CK9n)
- Tecno Camon 20 Pro 5G (CK8n)
- Tecno Camon 20s Pro 5G (CK8nB)
- Tecno Camon 11S (CB7)
- Tecno Phantom V Flip (AD11)
- Tecno Pova 2 (LE7)
- Tecno Pova 5 Pro (LH8n)
- Tecno Pova 6 Pro (LI9)
- Tecno Pova Neo 2 (LG6N)
- Tecno Pova Neo 3 (LH6n, LH6)
- Tecno Spark 10 (KI5N)
- Tecno Spark 10 5G (KI8)
- Tecno Spark 10 Pro (KI7)
- Tecno Spark 20 (KJ5)
- Tecno Spark 20C (BG7n)
- Tecno Spark 8 Pro (KG8)
- Tecno Spark Go 2023 (BF7)
- Tecno Spark Power 2 (LC8)


Added Set Active Slot Option
- You can use this function if phone stuck in Fastboot after flash

Fixed "No HWID Found" Issue in DA Selection

Improved Booting Process

Some Minor Improvements




Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)




Note : Some features are device/OS specific and may not work on all devices.




WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.

ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.




Download using Support Access or Mirrors



Official Website:
Ultimate Multi Tool
UMT Pro


Br,
UMT