CycloneBox Firmware v1.04 AVAIABLE

[hungphongmobile™]

** 12 May - CycloneBox Firmware v1.04 AVAIABLE ! **

New firmware revision was just compiled and uploaded to our server

Cyclone Nokia Application v1.04, (May 12 2009 00:28:13, gcc-4.2.2, RTOS v5.2.0), Type: Signed Production Application, Flags: CONST-TX2-PIN ; VISTA-SUPPORT

We have rewritten DCT4 booting routines (and finally reproduced 1680c booting problems).
That means 1680c and other phones booting problems was solved.
Upgrade your boxes and DCT4 booting problems will go away.
As usually each customer having 2 update credits,
so if something will go wrong during update (power failure, etc, etc, etc),
just go back and Maintenance your box again.


NOTE :
To upgrade your box, it needs be booted into bootloader mode.
Best way is to disconnect USB cable and connect it again.
Box will launch in bootloader mode, and now you can use
"Maintenance box" function from "Maintenance" module,
thus will upgrade your box.



Best Regards,
CT

[trungnguyenmobile2]

Có bản setup ko bạn ơi chứ nói ko thấy thèm wa!

[binhminh2k]

hộp xíchlô của e mấy hôm truớc vẫn chạy bình thường sao hôm nay đưa ra chạy toàn báo lỗi ko nhận đc .mặc dù e đã cài đi cài lại nhiều lân +cài lại luôn cả win mà vẫn ko đc .nó báo thế này ko à :
Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7396
Handling device: [Cyclone Team], [Cyclone Bootloader]
Initialization has failed -> No connection was established, or box is not in needed mode

xin ae trn 4r giúp đỡ