[Xin giúp] xin ae xem giúp em log 1110i

[tran_ba]

máy đang chết nguồn . đây là log của em nó ; Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.9169(08-01-2011), 1.0.0.15596(08-01-2011)
ASIC ID: 0x2201 [UPP_2M ver: 2]
SecondaryBoot: u_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A0
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
FlashID0: 0089 8872 [Intel 28F320W18,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
Algorithm: u_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x5690
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
Performing Flash Authentication ...OK
UEM ID: 00970390:2984DA60
ASIC type: 2
UEM Imei: 35899401014938
Flash Imei: 35899401014938
RPL saved to "C:\mobileEx\3.4\data\backup\RPL\35899401014938_BA CK.rpl"
Processing MCU file: rh93_07.020
[DCT4,DCT4 ALGORITHM] size: 1.89 MB
Supported Ids: 0120, 0121, 1021, 1120, 1130, 1131, 1201, 2140, 2142, 2201, 2031, 2030, 2032, 2033
ASIC ID: 0x2201 [UPP_2M ver: 2]
SecondaryBoot: u_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A0
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
FlashID0: 0089 8872 [Intel 28F320W18,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
Algorithm: u_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x5690
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
Performing Flash Authentication ...OK
UEM ID: 00970390:2984DA60
Area [01000000-0100FFFF] erased in 0.594 s
Area [01010000-013BFFFF] erased in 30.047 s
Area [013C0000-013EFFFF] erased in 1.750 s
Area [017C0000-017EFFFF] erased in 0.094 s
Area [01FC0000-01FEFFFF] erased in 0.094 s
Flash programming ...
Error while programming [14] at 0x01000000, Result: 0872
flashing terminated !
RX Buffer: 0872
xin giúp em, thanks all

[tran_ba]

em đã xóa full rồi

[traiit]

muc con nguồn coi pác

[tran_ba]

hiccc. có căn cứ gì để múc nguồn không anh? nguồn lại phải đục keo , nhìn log ae có thể biết gần chính xác con bệnh đươc không

[tran_ba]

đây là log em check ra; Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.9169(08-01-2011), 1.0.0.15596(08-01-2011)
ASIC ID: 0x2201 [UPP_2M ver: 2]
SecondaryBoot: u_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A0
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
FlashID0: 0089 8872 [Intel 28F320W18,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
Algorithm: u_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x5690
Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
Performing Flash Authentication ...OK
UEM ID: 00970390:2984DA60
ASIC type: 2
UEM Imei: 35899401014938
Flash Imei: 35899401014938
MasterCode: 5211217606
RPL saved to "C:\mobileEx\3.4\data\backup\35899401014938_BACK.r pl"

Phone not responding !

[traiit]

đây nè
Error while programming [14] at 0x01000000, Result: 0872
flashing terminated !
RX Buffer: 0872

[tran_ba]

đây nè
Error while programming [14] at 0x01000000, Result: 0872
flashing terminated !
RX Buffer: 0872

như vậy là có thể lổi nguôn hả a? em ga về phần mềm lắm . hiiiic. xin ae giúp cho

[minhung334]

thử cáp khác flash lại k dc bụp cpu nha a

[QUANGTRUNG_GSM]

làm lại cpu đi hoặc thay mới hết bệnh.máy này mình đảm bảo ko fai nguồn

[tran_ba]

ok. cám ơn các bác cho ý kiến. em làm lại upp xem sao. dù gì cũng con 2 con upp sơ cua