Chủ đề đã khoá
Kết quả 1 tới 10 của 10
  1. #1
    Thành viên mới DONGXOAI_GSM's Avatar
    Ngày tham gia
    Nov 2011
    Bài viết
    17
    Cám ơn !!!
    15
    Thanked 2 Times in 2 Posts

    Mặc định 1200 mở mã bảo vệ không được, chạy lại báo lỗi

    1st Boot: Ok, DCT4, UPP: 2292 [Rh-99] [2.2.0.2]
    2nd Boot: u3_2nd.fia, Ver: 4.79.0
    Fl0: 0x01000000-0x013FFFFF,00898872,Int 28F320W18
    Algorithm: u3_intel.fia, Ver: 4.80.0
    Algorithm Ok, MSID: 84F14E00D50FB74E3A7FE1F45C
    Decoded MSID: 3E4EBAE9-0007F62F-AA000000
    Encoded FAID: 9128EE48-236AEE50-7D43ACA9
    IMAGE: rh99_06.000
    Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
    Area2: 0x01010000-0x013AFFFF Erased, Time: 00:36
    Area3: 0x013B0000-0x013EFFFF Erased, Time: 00:03
    Area4: 0x017C0000-0x017EFFFF Out of Chip Bounds
    Area5: 0x01FC0000-0x01FEFFFF Out of Chip Bounds
    MCU Flashing Completed, Time: 00:20
    IMAGE: rh990_nai6.00mr
    Area1: 0x01380000-0x013AFFFF Erased, Time: 00:01
    CNT Flashing Completed, Time: 00:01
    Extracting Contents Package ...
    Init Local Mode Failed
    Contents Package Extracting Failed:
    Process Failed, Repowering Mobile

  2. #2
    Thành viên tích cực thuy1986's Avatar
    Ngày tham gia
    Aug 2009
    Bài viết
    409
    Cám ơn !!!
    26
    Thanked 128 Times in 107 Posts

    Mặc định

    bạn thử kiểm tra lại con trỏ kép BSI sem còn không ? kiểm tra cap ? không được lấy eazy 3in1 bẻ khóa là ok

  3. ( thuy1986 ) được 1 thành viên cảm ơn vì bài viết hữu ích!

    DONGXOAI_GSM (14-11-2011)

  4. #3
    Thành viên tích cực thuy1986's Avatar
    Ngày tham gia
    Aug 2009
    Bài viết
    409
    Cám ơn !!!
    26
    Thanked 128 Times in 107 Posts

    Mặc định anh em sem hộ cái log flash 5130 với

    ATF Software Version v7.70
    ATF Lightning FBUS Flash Started...

    Number of Image Files: 3

    Processing Image File :
    C:\Program Files\Nokia\Phoenix\Products\RM-495\rm495__07.97.mcusw
    CMT Type : BB5
    CMT Algorithm : BB5 ALGORITHM
    Secondary Sending Speed : 3250000Hz
    Algorithm Sending Speed : 6500000Hz
    Program Sending Speed : 6500000Hz
    Message Reading Speed : 98000Hz
    Number of Blocks : 1178
    Entry Point: 0x5057
    Page Format : -1
    MAX PAGE : 0x00004000
    Changing MODE : FLASH

    AdvanceBox SendBootCodeEx
    InitialiseBootstrap_DCT5 DIR
    BootFlashMode_DCT5

    ************************************************** ****
    TIME STARTS HERE
    ************************************************** ****

    BootFlashModeDCT5Ex Succeeded First Time
    SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0 (0x00) bytes returned
    Number of Sub Blocks 7 (0x07)
    1 SYSTEM_ASIC_ID 01
    Block Length : 21 (15)
    BB ASIC Index : 0 (00) CMT
    ID DWORD 0 : 00000001
    ID DWORD 1 : 00000226
    ID DWORD 2 : 00010006
    ID DWORD 3 : 030C1921
    ID DWORD 4 : 01033000
    2 ROM_ID 15
    Block Length : 5 (05)
    BB ASIC Index : 0 (00) CMT
    ID DWORD 0 : 00000296
    3 ROM_ID 15
    Block Length : 5 (05)
    BB ASIC Index : 0 (00) CMT
    ID DWORD 0 : 00000B22
    4 PUBLIC_ID 12
    Block Length : 21 (15)
    BB ASIC Index : 0 (00) CMT
    ID DWORD 0 : 26B00012
    ID DWORD 1 : 23497F56
    ID DWORD 2 : 7DD07762
    ID DWORD 3 : CB0130B6
    ID DWORD 4 : 266F1C1F
    5 ASIC_MODE_ID 13
    Block Length : 2 (02)
    BB ASIC Index : 0 (00) CMT
    Mode Id : 00
    6 ROOT_KEY_HASH 14
    Block Length : 17 (11)
    BB ASIC Index : 0 (00) CMT
    Hash : 9D DB FC FE 6E 73 CE D7 D8 C6 26 8C 8E B8 57 23
    7 ROM_ID 15
    Block Length : 9 (09)
    BB ASIC Index : 0 (00) CMT
    CRC 0 : 273F6D55
    CRC 1 : DFAAF68F
    Checksum D4

    SearchForBootstrap_DCT5..
    C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAP3Gv3_2nd.fg
    Boot File - Version 010.042.00
    Boot File - Revision 0x0000 (0)
    eBB5ProtocolType == Original
    SearchForBootstrap_DCT5 : No Error - 0 (0x00)
    Secondary Loader Sent...
    ConfigurationRequest_DCT5 (RAM_SIZE_BB5 0x0000)..
    MCU_CONFIGURATION_RESPONSE_BB5:
    MessageID : 03
    SubBlocks : 03
    1 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
    Block Length : 0B
    BB ASIC Index : CMT 00
    Device Type : NOR 00
    Device Index : 00
    Manufacturer Code : 0089 ->
    Device ID : 8982 -> NU48F512
    Extended/Fixed ID : 0000
    Revision ID : 8A31
    2 Sub Block ID : 11 STORAGE_DEVICE_CONTENTS_BB5
    Block Length : 13
    BB ASIC Index : CMT 00
    Device Type : NOR 00
    Device Index : 00
    Device Contents : 00000000000000000000
    3 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
    Block Length : 0B
    BB ASIC Index : CMT 00
    Device Type : MMC 04
    Device Index : 00
    Manufacturer Code : FFFF -> Flash
    Device ID : 0000 -> BAD FLASH TYPE
    Extended/Fixed ID : 0000
    Revision ID : 0000
    Checksum : 51
    SearchForBootstrap_DCT5 : No Error - 0 (0x00)
    FLS1SendAlgoCodeEx..
    SendAlgoCode_DCT5..
    SearchForAlgorithm_DCT5..
    Looking for ALL Devices...
    Searching Algorithm Files NOR (00) ManID :0089 DevID :8982 ExtID :0000 RevID :8A31
    Flash Descriptor
    Manufacturer Code : 0089
    Device ID : 8982
    Extended/Fixed ID : 0000
    Revision ID : 0000
    Size : 04000000 (64 MB)
    VPP Info : 0009
    Erase10s : 28
    Block1s : 64
    BErase1s : 02
    Reserved0 : 00
    Reserved1 : 00
    Reserved2 : 00
    VPPInfo : VPP_INFO_3V_MASK VPP_INFO_9V_MASK
    C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAP3Gv3_algo.fg
    Algorithm File - Version 010.040.00
    Algorithm File - Revision 0x0000 (0)
    eBB5ProtocolType == Original
    SearchForAlgorithm_DCT5 : No Error - 0 (0x00)
    TransmissionTypeRequest_DCT5...
    SuggestedType : 01 16BIT
    TRANSMISSION_TYPE_REQUEST_BB5 : 59 01 20 01 01 DC
    ReturnedType : 01 16BIT
    TransmissionTypeRequest_DCT5 : No Error - 0 (0x00)

    Uploading ALGO File...
    SendAlgoCodeFile_DCT5 : No Error - 0 (0x00)

    ============================================
    OLD Protocol Detected... Using Turbo Mode...
    ============================================

    Pabub KEY Request
    PhoneInfoRequest_BB5 (Asic Index 00 )
    PHONE_INFO_RESPONSE_BB5
    PAPUB_KEYS_HASH_RESP_BB5 2A
    BB Asic Index : 00
    CMT PAPUBKEYS HASH:
    0C917F11196FDB7378C18EF7260698CA4489DCA0
    Read Type : FIASCO_BB5_DO_NOT_READ_CERTIFICATE (01)
    Sending STORE_CERTIFICATE_REQUEST_BB5 (CMT 00 only)
    Certificate 1
    Name : NPC
    ASIC Index : CMT 0
    Certificate 2
    Name : VARIANT
    ASIC Index : CMT 0
    Certificate 3
    Name : R&D
    ASIC Index : CMT 0
    Certificate 4
    Name : CCC
    ASIC Index : CMT 0
    Certificate 5
    Name : HWC
    ASIC Index : CMT 0
    STORE_CERTIFICATE_REQUEST_BB5 : 61 05 2B 0D 4E 50 43 00 00 00 00 00 00 00 00 00 00 2B 0D 56 41 52 49 41 4E 54 00 00 00 00 00 00 2B 0D 52 26 44 00 00 00 00 00 00 00 00 00 00 2B 0D 43 43 43 00 00 00 00 00 00 00 00 00 00 2B 0D 48 57 43 00 00 00 00 00 00 00 00 00 00 85
    STORE_CERTIFICATE_REQUEST_BB5 : No Error - 0 (0x00)
    VPP Enabled by Software
    Using Internal VPP
    StartErase_DCT5...
    BlockLength : 0x36 (54)
    ERASE Blocks : 0x01 (1)
    0 ERASE_AREA_BB5 0x12
    Block Length : 0x33 (51)
    BB ASIC Index : 0x00 CMT
    Device Type : 0x00 NOR
    Device Index : 0x00
    0 : 00000000-000006BF
    1 : 000006C0-0001FFFF
    2 : 00040000-000BFFFF
    3 : 000C0000-0013FFFF
    4 : 00140000-0137FFFF
    5 : 01380000-0151FFFF

    Erase_SendEraseBlock_BB5_NOR
    Task in Progress... Please Wait...
    Status_BB5 STATUS_REQUEST_BB5..
    1 Sub Block ID : 14 STATUS_NOR_OK_BB5
    Block Length : 01
    BB ASIC Index : 00

    Successfully erased..
    Time Taken to Erase : 00:01:27
    TRANSMISSION_TYPE_REQUEST_BB5 : 59 01 20 01 04 D9
    ReturnedType : 04 DDR & 2TX
    TransmissionTypeRequest_DCT5 : No Error - 0 (0x00)

    Flashing Speed: 5.00 Mhz
    Processing : rm495__07.97.mcusw
    Total blocks to write : 1178
    ================================================
    FBUS Cable RX2 PIN Diagnostics
    ================================================
    Status_BB5 STATUS_REQUEST_BB5..
    1 Sub Block ID : 14 STATUS_NOR_OK_BB5
    Block Length : 01
    BB ASIC Index : 00
    ================================================
    INFO: RX2 PIN is OK
    ================================================
    >> CMT Rootkey Hash CERT : NOLO
    >> CMT Rootkey Hash CERT : KEYS
    >> CMT Rootkey Hash CERT : PRIMAPP
    >> CMT Rootkey Hash CERT : PASUBTOC
    >> CMT Rootkey Hash CERT : PAPUBKEYS
    >> CMT Rootkey Hash CERT : UPDAPP
    >> CMT Rootkey Hash CERT : DSP0
    >> CMT Rootkey Hash CERT : MCUSW
    ContinueFlash_DCT5 Complete
    Status_BB5 STATUS_REQUEST_BB5..
    1 Sub Block ID : 14 STATUS_NOR_OK_BB5
    Block Length : 01
    BB ASIC Index : 00
    Continue Flash Complete : : No Error - 0 (0x00)
    Time Taken to Flash : 00:00:57

    Processing Image File :
    C:\Program Files\Nokia\Phoenix\Products\RM-495\rm495__07.97.ppm_v
    CMT Type : BB5
    CMT Algorithm : BB5 ALGORITHM
    Secondary Sending Speed : 3250000Hz
    Algorithm Sending Speed : 6500000Hz
    Program Sending Speed : 6500000Hz
    Message Reading Speed : 98000Hz
    Number of Blocks : 494
    Entry Point: 0x00BE
    Page Format : -1
    MAX PAGE : 0x00004000
    VPP Enabled by Software
    Using Internal VPP
    StartErase_DCT5...
    BlockLength : 0x0E (14)
    ERASE Blocks : 0x01 (1)
    0 ERASE_AREA_BB5 0x12
    Block Length : 0x0B (11)
    BB ASIC Index : 0x00 CMT
    Device Type : 0x00 NOR
    Device Index : 0x00
    0 : 01520000-01DBFFFF

    Erase_SendEraseBlock_BB5_NOR
    Task in Progress... Please Wait...
    Status_BB5 STATUS_REQUEST_BB5..
    1 Sub Block ID : 14 STATUS_NOR_OK_BB5
    Block Length : 01
    BB ASIC Index : 00

    Successfully erased..
    Time Taken to Erase : 00:00:36
    TRANSMISSION_TYPE_REQUEST_BB5 : 59 01 20 01 04 D9
    ReturnedType : 04 DDR & 2TX
    TransmissionTypeRequest_DCT5 : No Error - 0 (0x00)

    Flashing Speed: 5.00 Mhz
    Processing : rm495__07.97.ppm_v
    Total blocks to write : 494
    ContinueFlash_DCT5 Complete
    Status_BB5 STATUS_REQUEST_BB5..
    1 Sub Block ID : 14 STATUS_NOR_OK_BB5
    Block Length : 01
    BB ASIC Index : 00
    Continue Flash Complete : : No Error - 0 (0x00)
    Time Taken to Flash : 00:00:21

    Processing Image File :
    C:\Program Files\Nokia\Phoenix\Products\RM-495\rm495__07.97.image_v_red
    CMT Type : BB5
    CMT Algorithm : BB5 ALGORITHM
    Secondary Sending Speed : 3250000Hz
    Algorithm Sending Speed : 6500000Hz
    Program Sending Speed : 6500000Hz
    Message Reading Speed : 98000Hz
    Number of Blocks : 824
    Entry Point: 0x00D0
    Page Format : -1
    MAX PAGE : 0x00004000
    VPP Enabled by Software
    Using Internal VPP
    StartErase_DCT5...
    BlockLength : 0x16 (22)
    ERASE Blocks : 0x01 (1)
    0 ERASE_AREA_BB5 0x12
    Block Length : 0x13 (19)
    BB ASIC Index : 0x00 CMT
    Device Type : 0x00 NOR
    Device Index : 0x00
    0 : 01DC0000-0215FFFF
    1 : 02160000-03FBFFFF

    Erase_SendEraseBlock_BB5_NOR
    Task in Progress... Please Wait...
    Status_BB5 STATUS_REQUEST_BB5..
    1 Sub Block ID : 14 STATUS_NOR_OK_BB5
    Block Length : 01
    BB ASIC Index : 00

    Successfully erased..
    Time Taken to Erase : 00:02:20
    TRANSMISSION_TYPE_REQUEST_BB5 : 59 01 20 01 04 D9
    ReturnedType : 04 DDR & 2TX
    TransmissionTypeRequest_DCT5 : No Error - 0 (0x00)

    Flashing Speed: 5.00 Mhz
    Processing : rm495__07.97.image_v_red
    Total blocks to write : 824
    ContinueFlash_DCT5 Complete
    Status_BB5 STATUS_REQUEST_BB5..
    1 Sub Block ID : 14 STATUS_NOR_OK_BB5
    Block Length : 01
    BB ASIC Index : 00
    Continue Flash Complete : : No Error - 0 (0x00)
    Time Taken to Flash : 00:00:36

    Total Flash Write Time (Flashing Only) : 00:01:54
    Total Flashing Time (Booting + Erase + Flashing) : 00:06:19

    FlashInfo.RestartMode : 2

    Waiting for Phone to Go Online...
    Elapsed Time: 1s
    Elapsed Time: 2s
    Elapsed Time: 3s
    Elapsed Time: 4s
    Elapsed Time: 5s
    Elapsed Time: 6s
    Elapsed Time: 7s
    Elapsed Time: 8s
    Elapsed Time: 9s
    Elapsed Time: 10s

    MCU Version: V 07.97 13-09-10 RM-495 (c) Nokia
    IMEI Plain : 355232033730086
    IMEI Spare : A355232033730080
    IMEI SV : 33552320337300858F
    Phone Model: Nokia 5130c-2
    Product Serial Number: IBX011802
    Product Code : 0578115
    Module Code : 0204024
    Basic Production Code: 0567772
    Default SN Type : 0
    MCU SW Version : V 07.97 13-09-10 RM-495 (c) Nokia V
    BT MCM Version : 2222-302
    PPM Version : V 07.97 13-09-10 RM-495 (c) Nokia
    HW Version : 2000
    RFIC Version : 06540601
    DSP Version : ICPR72_10w01
    LCD Version : SEIKO
    Content Pack Version : Content: v_red V 07.97 13-09-10 RM-495 (c) Nokia
    AHNE Version : 30
    Retu Version : 16
    Tahvo Version : 22

    ******** Reading SimLock ********
    Unable to read SP Data..

    Waiting for Phone to Go Online...
    Elapsed Time: 1s
    Elapsed Time: 2s
    Elapsed Time: 3s
    Elapsed Time: 4s
    Elapsed Time: 5s
    Elapsed Time: 6s
    Elapsed Time: 7s
    Elapsed Time: 8s
    Elapsed Time: 9s
    Elapsed Time: 10s

    MCU Version: V 07.97 13-09-10 RM-495 (c) Nokia
    IMEI Plain : 355232033730086
    IMEI Spare : A355232033730080
    IMEI SV : 33552320337300858F
    Phone Model: Nokia 5130c-2
    Product Serial Number: IBX011802
    Product Code : 0578115
    Module Code : 0204024
    Basic Production Code: 0567772
    Default SN Type : 0
    MCU SW Version : V 07.97 13-09-10 RM-495 (c) Nokia V
    BT MCM Version : 2222-302
    PPM Version : V 07.97 13-09-10 RM-495 (c) Nokia
    HW Version : 2000
    RFIC Version : 06540601
    DSP Version : ICPR72_10w01
    LCD Version : SEIKO
    Content Pack Version : Content: v_red V 07.97 13-09-10 RM-495 (c) Nokia
    AHNE Version : 30
    Retu Version : 16
    Tahvo Version : 22

    ******** Reading SimLock ********
    Unable to read SP Data..
    SECURITY_TEST : PASSED
    SECURITY_CODE : 12345
    PHONE_MODE : TEST MODE

    ================================================
    Dynamic Camera Configuration
    ================================================
    DCC ID : NIMMIIIIRRFF094B2F01
    DCC Ver: 002009
    Status : OK



    FACTORY SET TO : Full Factory Set
    OK
    FACTORY SET TO : User Data
    OK
    FACTORY SET TO : Leave Factory
    OK
    FACTORY SET TO : Service Center
    OK
    FACTORY SET TO : Software Upgrade
    OK
    FACTORY SET TO : Production Tune
    OK

    RESET LIFE TIMER TO : 0000:00
    OK


    mở nguồn contaservice sin anh em cho y kiến với

    lập thraed mới không spam bài khác
    Last edited by ThanhHai_GSM; 14-11-2011 at 07:43.

  5. #4
    Thành viên tích cực v&tmobile's Avatar
    Ngày tham gia
    Oct 2008
    Địa điểm
    Ctythegioididong
    Bài viết
    544
    Cám ơn !!!
    131
    Thanked 324 Times in 160 Posts

    Mặc định

    che chân Vbb lại đi bro .

  6. ( v&tmobile ) được 1 thành viên cảm ơn vì bài viết hữu ích!

    DONGXOAI_GSM (14-11-2011)

  7. #5
    Moderator QUANGTRUNG_GSM's Avatar
    Ngày tham gia
    May 2010
    Địa điểm
    ĐIỆN BIÊN
    Tuổi
    36
    Bài viết
    2,497
    Cám ơn !!!
    696
    Thanked 1,108 Times in 659 Posts

    Mặc định

    che chân vpp đi flash lại nhé.hoặc đánh dấu vào mục cnt auto và chạy lại >>>done
    TRUNG HIẾU MOBILE
    CHỢ TRUNG TÂM THỊ TRẤN TUẦN GIÁO ĐIỆN BIÊN
    YH :quangtrunggsm fb: quangtrunggsm@yahoo.com.vn


  8. ( QUANGTRUNG_GSM ) được 1 thành viên cảm ơn vì bài viết hữu ích!

    DONGXOAI_GSM (14-11-2011)

  9. #6
    V.I.P viethuy_mobi's Avatar
    Ngày tham gia
    Dec 2009
    Bài viết
    1,858
    Cám ơn !!!
    500
    Thanked 484 Times in 377 Posts

    Mặc định

    lỗi ko đồng bộ dc
    che chân vpp này lại

    rùi xóa flash +flash lại +writer file pm + unlook đo bạn
    yahoo: viethuy_mobi

  10. ( viethuy_mobi ) được 1 thành viên cảm ơn vì bài viết hữu ích!

    DONGXOAI_GSM (14-11-2011)

  11. #7
    Thành viên mới DONGXOAI_GSM's Avatar
    Ngày tham gia
    Nov 2011
    Bài viết
    17
    Cám ơn !!!
    15
    Thanked 2 Times in 2 Posts

    Mặc định

    che chân VPP chạy lại ok. thanks all

  12. #8
    Thành viên kỳ cựu tuanhung.dd's Avatar
    Ngày tham gia
    Feb 2011
    Địa điểm
    thanh hóa
    Bài viết
    1,356
    Cám ơn !!!
    300
    Thanked 338 Times in 300 Posts

    Mặc định

    trước tiên bạn kiểm tra 4 chân < ok đả > xong lắc nhẹ uem xong bỏ vào chek => chek ok mà info ko ok thì bạn xóa hết nạp lại |+ wer pm + unlok =. ok 100%
    chúc bạn thành công
    yahoo: khucnhacsau_khucnhacsau
    call :0976 001 628

  13. #9
    Thành viên mới gsm-tg's Avatar
    Ngày tham gia
    Oct 2011
    Bài viết
    36
    Cám ơn !!!
    3
    Thanked 13 Times in 11 Posts

    Mặc định

    Trích Được post bởi viethuy_mobi Xem bài viết
    lỗi ko đồng bộ dc
    che chân vpp này lại

    rùi xóa flash +flash lại +writer file pm + unlook đo bạn
    cái nầy là chính xác ,mình đã gặp và đã thành công khi che chân vpp rồi chại lại.

  14. #10
    V.I.P ThanhHai_GSM's Avatar
    Ngày tham gia
    Mar 2009
    Tuổi
    45
    Bài viết
    3,314
    Cám ơn !!!
    439
    Thanked 2,487 Times in 1,105 Posts

    Mặc định

    đã ok Close

    che chân VPP chạy lại ok. thanks all

Chủ đề đã khoá

Thread Information

Users Browsing this Thread

Hiện có 1 người đang xem bài này . Bao gồm : 0 thành viên và 1 khách

     

Similar Threads

  1. 1200 chạy lổi
    By ANH_MOBILE in forum DCT4 - WD2
    Trả lời: 1
    Bài viết cuối: 17-02-2012, 11:38
  2. Trả lời: 14
    Bài viết cuối: 15-08-2011, 20:58
  3. 1200 chạy fần mềm ko được
    By hoanghoatham in forum DCT4 - WD2
    Trả lời: 4
    Bài viết cuối: 05-06-2009, 14:38
  4. 1200 chạy chậm,có sóng mà ko gọi dc
    By IC.NGUON in forum DCT3-DCTL
    Trả lời: 4
    Bài viết cuối: 07-05-2009, 18:11
  5. Trả lời: 2
    Bài viết cuối: 21-04-2009, 09:25

Quyền viết bài

  • Bạn không thể tạo chủ đề mới
  • Bạn không thể gửi trả lời
  • Bạn không thể gửi đính kèm
  • Bạn không thể sửa bài viết của bạn
Lên đầu trang
thiet bi sua chua slim sim, heicard, sim ghep Firmware android giải pháp nhà thông minh