[Xin giúp] 6230i xin giúp

[madao]

mình vừa mới nhận con 6230i mất nguồn.mình cho vào mx nạp lại phầm mềm thì nó báo thế này:


Using device: HTI, FW ver: 00.50, SN: 00009704
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.0.0
Module ver: 1.0.0.19663(13-12-2011), Library ver: 1.0.0.13672(13-12-2011)
Processing MCU file: rm72_73_11003.880
[TIKU BT2,TIKU ALGORITHM] size: 10.14 MB
Supported Ids: 1052, 2051
ASIC ID: 0x2051 [TikuEdge ver: 2.0]
SecondaryBoot: te_2nd.fia [TIKU BT2] version: 4.76.0 revision: 0.7 size: 0x2398
Supported Ids: 1051, 1052, 2051
FlashID0: 00EC 22E8 [Samsung K8S2815ETB,128 Mbits] page size: 64 K type: NOR area: 00000000-00FFFFFF
FlashID1: 00EC 0010 [Samsung KFM5616Q2M MuxOneNAND,256 Mbits] type: NAND hw: ONEMUX(M)
FlashID2: 0000 0001 [unused/removed]
FlashID3: 0000 0001 [unused/removed]
ExtBUSC: 0000 0000 18F0 9FE5 18F0 9FE5 18F0 9FE5
Algorithm: te_amd.fia [TIKU ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x84D8
Supported Ids: 1051, 1052, 2051
Performing Flash Authentication ...OK
UEM ID: 00A41F20:8615DA60
Area [00000000-0000FFFF] erased in 0.375 s
Area [00010000-009FFFFF] erased in 1 min 3.859 s
Area [00A00000-00B3FFFF] erased in 7.953 s
Area [00B60000-00FAFFFF] erased in 27.609 s
Flash programming ...
Programming completed in 1 min 18.032 s
File Processed in 3 min 8.032 s
Processing CNT file: rm72_73_110M_03.88.ucp_V
[TIKU BT2,TIKU MON CSM] size: 3.92 MB
Supported Ids: 1052, 2051
ASIC ID: 0x2051 [TikuEdge ver: 2.0]
SecondaryBoot: te_2nd.fia [TIKU BT2] version: 4.76.0 revision: 0.7 size: 0x2398
Supported Ids: 1051, 1052, 2051
FlashID0: 00EC 22E8 [Samsung K8S2815ETB,128 Mbits] page size: 64 K type: NOR area: 00000000-00FFFFFF
FlashID1: 00EC 0010 [Samsung KFM5616Q2M MuxOneNAND,256 Mbits] type: NAND hw: ONEMUX(M)
FlashID2: 0000 0001 [unused/removed]
FlashID3: 0000 0001 [unused/removed]
ExtBUSC: 0000 0000 18F0 9FE5 18F0 9FE5 18F0 9FE5
Algorithm: te_oncsm.fia [TIKU MON CSM] version: 4.76.0 revision: 0.7 size: 0x5660
Supported Ids: 1051, 1052, 2051
Mass Memory Storage Device detected.
Configuring MM bus ...
Formating partition ...OK
Opening MM device ...
Erasing disks ...OK
Flash programming ...
The semaphore timeout period has expired
Error while programming [2E] at 0x01000020, Result: 0000
flashing terminated !
rất mong anh chị em giúp giùm một tay

[madao]

còn đây la lock mình chạy bàng jaf:
Getting MCU ID

MCU ID: 0x2051
FLASH ID0: 22E800EC <=> SAMSUNG (SEC) -> K5G2829ATC Addr0: 0x00000000 - 0x00FFFFFF, SectorSize0: 10
FLASH ID1: 001000EC <=> SAMSUNG (SEC) -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 9
FLASH ID2: 00010000 <=> Flash -> not used Addr2: 0x04000000 - 0x04FFFFFF, SectorSize2: 0
FLASH ID3: 00010000 <=> Flash -> not used Addr3: 0x06000000 - 0x06FFFFFF, SectorSize3: 0
First 16 bytes: 00 00 00 00 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5
Checking RAM for ALGO...
Algo is ready...
Checking FAID calculation...
P-key nokia module version 01.02
Done!
Phone Restarted...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-72\
Scanning for ini files...
INI file .ini is missing. Continue searching for second ini type...
Changing flashing settings...
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-72\rm72_73_11003.880
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-72\rm72_73_110E_03.88A
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-72\rm72_73_110E_03.88.ucp_A
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Languages in ppm: English,Finnish,Swedish,Danish,Norwegian,German,Ic elandic
MCU: C:\Program Files\Nokia\Phoenix\Products\RM-72\rm72_73_11003.880
Booting phone...
MCU ID: 0x2051
BOOT file: C:\Program Files\ODEON\JAF\Flash\te_2nd.fia
Loader version: 04.4C.00 -> Revision: 0007
Boot size is 0x2398
Boot is ready...
FLASH ID0: 22E800EC <=> SAMSUNG (SEC) -> K5G2829ATC Addr0: 0x00000000 - 0x00FFFFFF, SectorSize0: 10
FLASH ID1: 001000EC <=> SAMSUNG (SEC) -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 9
FLASH ID2: 00010000 <=> Flash -> not used Addr2: 0x04000000 - 0x04FFFFFF, SectorSize2: 0
FLASH ID3: 00010000 <=> Flash -> not used Addr3: 0x06000000 - 0x06FFFFFF, SectorSize3: 0
First 16 bytes: 00 00 00 00 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5
Flash ID is 0x22E800EC
Flash loader is C:\Program Files\ODEON\JAF\Flash\te_amd.fia
Loader version: 04.4C.00 -> Revision: 0007
Loader size is 0x84D8; Loader chk: 28
Loader is ready...
P-key nokia module version 01.02
MSID: 84DB0566919FB69DFFAB35B08F
MSID decoded: 91DFBAE900A41F20A8000000
FAID: C43C7B56570D53F90250717F
Operation took 0 minutes 10 seconds...
Erasing...
Found 4 interval(s) to erase
Erasing area: 00000000 - 0000FFFF...
Erasing area: 00010000 - 009FFFFF...
Erasing area: 00A00000 - 00B3FFFF...
Erasing area: 00B60000 - 00FAFFFF...
Operation took 1 minutes 39 seconds...
Writing...
Perm. Data Restore OK
Operation took 1 minutes 0 seconds...
Restarting MCU...
NAND Format OK!
CNT: C:\Program Files\Nokia\Phoenix\Products\RM-72\rm72_73_110E_03.88.ucp_A
Booting phone...
MCU ID: 0x2051
BOOT file: C:\Program Files\ODEON\JAF\Flash\te_2nd.fia
Loader version: 04.4C.00 -> Revision: 0007
Boot size is 0x2398
Boot is ready...
FLASH ID0: 22E800EC <=> SAMSUNG (SEC) -> K5G2829ATC Addr0: 0x00000000 - 0x00FFFFFF, SectorSize0: 10
FLASH ID1: 001000EC <=> SAMSUNG (SEC) -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 9
FLASH ID2: 00010000 <=> Flash -> not used Addr2: 0x04000000 - 0x04FFFFFF, SectorSize2: 0
FLASH ID3: 00010000 <=> Flash -> not used Addr3: 0x06000000 - 0x06FFFFFF, SectorSize3: 0
First 16 bytes: 00 00 00 00 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5
Flash ID is 0x22E800EC
Flash loader is C:\Program Files\ODEON\JAF\Flash\te_essr.fia
Loader version: 04.4C.00 -> Revision: 0007
Loader size is 0x9868; Loader chk: 4d
Loader is ready...
Operation took 0 minutes 8 seconds...
Erasing Content Pack...
Mass Memory Device Detected...
MM Bus Configured...
Formating MM...Format failed!

[1quachuoi9]

Bạn thử nạp 1 file CNT tc thôi nếu EXtract đc thì nạp thêm 2 file nữa mấy dòng này hay lỗi khi Extract lắm.nếu có CYCLONE thì nạp thẳng lun ok còn k0 thì làm thủ công như thế hơi lâu tý co ÚIiittttiinngg fail cũng lên nguồn bỏ pin vào máy mở lên rồi wa HWK ìno UL fats nữa Done thôi. mình đã test 2 3 cây rồi. Good Luck !

[madao]

thanks ban để mình lam phát thư coi