1280 rơi đất chết nguồn

[daochikien]

em vừa đóng lại flash và upp đem vào ATF check và chạy phần mềm thì nó báo như sau

Booting Phone...
CPU ID Response: A200341100
CPU Type: XG110 2.1B
Phone Booted at after First attempt...

************************************************** ****
TIME STARTS HERE
************************************************** ****


Sending PBL 19456 bytes...
PBL Successfully Sent...

Sending SBL 65024 bytes...
SBL Successfully Sent...

Flash Chip Manufacturer: STMicroelectronics
Flash Chip Type: M58WR064 64 Mbit (4Mb x 16) NOR
Extended Information: Multiple Bank / Burst / 1.8v

Processing Image File: C:\Documents and Settings\03203522264\Desktop\RM-647_1280 (6.51)\rm647_006.510

FIRMWARE Image Found...
Number of Sections: 03
FIRMWARE Certificate Block Sent Successfully...
Processing Section 01 of 03
FIRMWARE Erase Block: 0x00800000~0x00A0FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 2162688 bytes
Data Checksum: 5EF5
Uploading Data Blocks to phone...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 02 of 03
FIRMWARE Erase Block: 0x00C60000~0x00EAFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 2069312 bytes
Data Checksum: F587
Uploading Data Blocks to phone...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 03 of 03
FIRMWARE Erase Block: 0x00FFC000~0x00FFFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 64 bytes
Data Checksum: 0000
Uploading Data Blocks to phone...
FIRMWARE Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...


Processing Image File: C:\Documents and Settings\03203522264\Desktop\RM-647_1280 (6.51)\rm647_006.51mr

PPM Image Found...
Number of Sections: 01
PPM Certificate Block Sent Successfully...
Processing Section 01 of 01
PPM Erase Block: 0x00210000~0x003288BE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 1149120 bytes
Data Checksum: 0715
Uploading Data Blocks to phone...
PPM Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...


Processing Image File: C:\Documents and Settings\03203522264\Desktop\RM-647_1280 (6.51)\rm6470_nai06.51mr

CONTENT Image Found...
Number of Sections: 01
CONTENT Certificate Block Sent Successfully...
Processing Section 01 of 01
CONTENT Erase Block: 0x00EB0000~0x00EFBA3E
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 309824 bytes
Data Checksum: D0A1
Uploading Data Blocks to phone...
CONTENT Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...


Exit Flash Mode Done...
Time Elapse : 00:02:37

************************************************** ****
You must Factory Reset the phone to enable the
ringtones and other customized settings to work
************************************************** ****


Waiting For Phone to go Online...

5, 4, 3, 2, 1...
ERROR : PHONE READ INFO FAILED
mong ae giúp hộ em với . em không biết phải làm gì nữa . thanks

[daochikien]

ae đi đâu hết rồi , giúp hộ em với !

[BinhMinhGSM]

làm chân con flash rồi đóng lại và flash lại xem sao. log ATF nhìn k bít j hết. thèm atf ma chưa sắm đc.

[thaitg85]

chắc con upp mất chân rồi dòng này rớt hay bị mất chân lắm

[HOÀNGTRUY_GSM]

Đang dùng bản version mấy vậy bác

[daochikien]

upp vẫn còn nguyên chân , đã đóng lại chuẩn rồi nhưng flash vẫn không được

[daochikien]

máy chết nguồn nên em không biết là bản version mấy

[HOÀNGTRUY_GSM]

Ý mình nói ATF bạn kìa,chạy 8 mấy

[kythuat.GSM]

mấy của bạn nạp file vào đc nhunngw không đồng bộ đc là do cpu bị lỗi

[daochikien]

ATF của em là bản 8.50