[Xin giúp] Chạy phần mềm cho 6230i bị lỗi

[tinhocttc]

Mình flash cây 6230i , nó chạy hết file MCU xong báo lỗi như thế này,mình là lính mới nên chưa có nhiều kinh nghiệm mong ace chỉ dậy em xin chân thành cảm ơn !
đây là log lỗi của MXbox


MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 3], SN: C0855B3F
Using device: HTI, FW ver: 00.50, SN: 0000DFF2
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.20769(01-04-2012), Library ver: 1.0.0.14022(01-04-2012)
ASIC ID: 0x1052 [TikuEdge ver: 1.1]
SecondaryBoot: te_2nd.fia [TIKU BT2] version: 4.76.0 revision: 0.7 size: 0x2398
Supported Ids: 1051, 1052, 2051
FlashID0: 00EC 22E8 [Samsung K8S2815ETB,128 Mbits] page size: 64 K type: NOR area: 00000000-00FFFFFF
FlashID1: 00EC 0010 [Samsung KFM5616Q2M MuxOneNAND,256 Mbits] type: NAND hw: ONEMUX(M)
FlashID2: 0000 0001 [unused/removed]
FlashID3: 0000 0001 [unused/removed]
ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
Algorithm: te_amd.fia [TIKU ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x84D8
Supported Ids: 1051, 1052, 2051
Performing Flash Authentication ...OK
UEM ID: 009C3CEF:3B8ADA60
ASIC type: 6
UEM Imei: 35796400100631
Flash Imei: 35796400100631
RPL saved to "C:\mobileEx\3.5\data\backup\RPL\3579640010063 1_BA CK.rpl"
Processing MCU file: rm72_73_11003.880
[TIKU BT2,TIKU ALGORITHM] size: 10.14 MB
Supported Ids: 1052, 2051
ASIC ID: 0x1052 [TikuEdge ver: 1.1]
SecondaryBoot: te_2nd.fia [TIKU BT2] version: 4.76.0 revision: 0.7 size: 0x2398
Supported Ids: 1051, 1052, 2051
FlashID0: 00EC 22E8 [Samsung K8S2815ETB,128 Mbits] page size: 64 K type: NOR area: 00000000-00FFFFFF
FlashID1: 00EC 0010 [Samsung KFM5616Q2M MuxOneNAND,256 Mbits] type: NAND hw: ONEMUX(M)
FlashID2: 0000 0001 [unused/removed]
FlashID3: 0000 0001 [unused/removed]
ExtBUSC: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
Algorithm: te_amd.fia [TIKU ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x84D8
Supported Ids: 1051, 1052, 2051
Performing Flash Authentication ...OK
UEM ID: 009C3CEF:8615DA60
Area [00000000-0000FFFF] erased in 0.500 s
Area [00010000-009FFFFF] erased in 1 min 19.625 s
Area [00A00000-00B3FFFF] erased in 10.094 s
Area [00B60000-00FAFFFF] erased in 32.922 s
Flash programming ...
Programming completed in 1 min 17.343 s
File processed in 3 min 32.062 s
Processing CNT file: rm72_73_110M_03.88.ucp_v
[TIKU BT2,TIKU MON CSM] size: 3.92 MB
Supported Ids: 1052, 2051
ASIC ID: 0x1052 [TikuEdge ver: 1.1]
SecondaryBoot: te_2nd.fia [TIKU BT2] version: 4.76.0 revision: 0.7 size: 0x2398
Supported Ids: 1051, 1052, 2051
FlashID0: 00EC 22E8 [Samsung K8S2815ETB,128 Mbits] page size: 64 K type: NOR area: 00000000-00FFFFFF
FlashID1: 00EC 0010 [Samsung KFM5616Q2M MuxOneNAND,256 Mbits] type: NAND hw: ONEMUX(M)
FlashID2: 0000 0001 [unused/removed]
FlashID3: 0000 0001 [unused/removed]
ExtBUSC: 0000 0000 18F0 9FE5 18F0 9FE5 18F0 9FE5
Algorithm: te_oncsm.fia [TIKU MON CSM] version: 4.76.0 revision: 0.7 size: 0x5660
Supported Ids: 1051, 1052, 2051
Mass Memory Storage Device detected.
Configuring MM bus ...
Formating partition ...OK
Opening MM device ...
Erasing disks ...OK
Flash programming ...
The semaphore timeout period has expired
Error while programming [2E] at 0x01000020, Result: 0000
flashing terminated !

Mong anh em giúp đỡ là nó lỗi gì nhé. xin chân thành cảm ơn.

[ductuan78]

bạn chạy bằng usb xem sao

[tinhocttc]

mình chạy bằng cáp đa năng.

[TRIEU_MAM_MOBILE]

xem lại dây đi bạn ơi

[tinhocttc]

xem rồi mà vẫn vậy à.............

[lethanhtam92]

tìm file flash gốc của máy chạy là ok ngay