máy bị rớt đất mất nguồn e đã thay màn hình(e thay màn c1 01), dao động và cả cặp mà nó vẫn ngủ
kẹp dòng kim không nhúc nhíc
chẹck , scan phone vẫn bình thường
và khi kẹp dòng vào đèn pin có nháy sáng rồi tắt
ai gặp qua giúp e
đây là log của e nó
VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done
Booting Phone...
CPU ID Response: A200341100
CPU Type: XG110 2.1B
Phone Booted at after First attempt...
************************************************** ****
START INFINEON BUS CHECK
************************************************** ****
Sending PBL 37888 bytes...
PBL Successfully Sent...
Sending SBL 65024 bytes...
SBL Successfully Sent...
Flash Chip Manufacturer: Samsung Electronics Corp.
Flash Chip Type: K8S6415ETC 64 Mbit (4Mb x 16) NOR
Extended Information: Multiple Bank / Burst / 1.8v
************************************************** ****
INFINEON BUS CHECK DONE
************************************************** ****
MCU: V 05.34 12-07-11 RM-713 (c) Nokia
IMEI: 359032047729447
Product Serial Number: 420273EAH
Product Code : 059G464
Module Code : 0204727
Basic Production Code: 059K8F3
PPM SW Version : V 05.34 12-07-11 RM-713 (c) Nokia MR
ADSP Version : p V 05.34\n12-07-11\nRM-713\n(c) NMP\nmr
MCU SW Version : V 05.34 12-07-11 RM-713 (c) Nokia
HW Version : 1000
UEM Version : 1328
UPP Version : 8850
LCD Version : WIN:BARACOAv80 NT39121
********** SIMLOCK INFO **********
CONFIG_DATA : 0010100000000000
PROFILE_BITS : 0000000000030002
ASIC : 11
PROVIDER : Default Test Operator
Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST : PASSED
Make sure you have installed the
COMPLETE Flash Package for this Phone...
Goto "Settings" --> "Nokia Settings" and verify that
the Folder where you installed your Flash Files are
in the "PRODUCT PATH TO SCAN" List...