[Chia sẻ] Tiếng việt Nokia 112 -RM-837 OK By MX BOX !

[tuanhoang]

Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 29A66969
Device synchronized.
CPU: XGOLD 213
Using embedded SBL from MCU.
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.50
EBL version: Quantum_Bootloader_10.50_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 0089 8982 - 23280001 [Intel NU48F512,512 Mbits]
CFI information:
Flash settings: 0/1024, size: 0x04000000
1 Block regions:
512 x 0x00020000 = 0x04000000
EBL ready !
Original IMEI: 351 xxxxxxxx
IMEI_DATA saved OK
CCC_DATA saved OK
HWC_DATA saved OK
RPL saved to "C:\mobileEx\3.5\data\backup\XGOLD_351xxxxxxxx_bac k.RPL"
Processing file: rm837__03.26.mcusw
Downloading item CODE:rm837__03.26.mcusw_ebl_psi.fls, num block: 4, size: 26 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.348 s
Erasing area 0x40040000-0x4005FFFE ...OK
Programming completed in 0.362 s
Erasing area 0x40060000-0x4015FFFE ...OK
Programming completed in 1.474 s
Erasing area 0x40280000-0x41B3FFFE ...OK
Programming completed in 33.173 s
Checksum verified (0xDC22)
Processing file: rm837__03.26.ppm_s3
Downloading item CUSTackage_s3.ppm_ebl_psi.fls, num block: 1, size: 4.44 MB
Erasing area 0x41BC0000-0x4202F79E ...OK
Programming completed in 5.996 s
Checksum verified (0x708F)
Processing file: rm837__03.26.image_s3_059P4Q9
Downloading item CUSTackage_s3_059P4Q9.image.fls, num block: 1, size: 15.63 MB
Erasing area 0x421C0000-0x43E1FFFE ...OK
Programming completed in 20.807 s
Checksum verified (0x482C)
Total time for flashing process(boot+erase+write) was 7 min 52.086 s
Waiting for USB device removal ...
Waiting for device boot up ...
Device connected: nmwcdc\Nokia C2-00 USB Phonet, PORT_ID: B2A4F42
Verifying communication to device OK.



Phone type: RM-837 (Nokia 112)
SW version: V 03.26 27-06-12 RM-837 (c) Nokia
Imei plain: 351 xxxxxxxxxxx
Product code: 059P4P4
Battery voltage: 4860 mV, current: 191 mA
Cellular system: GSM
ASIC ID: 0x0000, type: 11
Ppm Id: S3
Language Pack:
- not available.

Master code: 3306264011
Camera config: NI00CS00000401022F03, ver: 010.009

Imei net: 35xxxxxxxxxxx
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 800000000004000B

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN





Chúc các bạn thành công !

[mrthuannguyen1803]

ad cài tiếng việt lại con 112 giúp mình dc ko, mình ko biết làm.... help me

[LocPhatBacLieu™]

ad cài tiếng việt lại con 112 giúp mình dc ko, mình ko biết làm.... help me

Bạn có Box chạy phần mềm Nokia không, nếu không có thì đem máy ra thợ làm cho nhanh nha.